Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Instructions on how to use the memory card Maintenance of the memory card Be sure to format the memory card (see p. 67) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognize, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card’s performance.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Important notes Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card. Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc.
Warning indicator There are several warnings that may appear on the LCD display Warning indicator Causes - Memory card error - Turn off the camera power and turn it on again - Insert the memory card again - Format the memory card (p.
Before contacting a service center Please check the following Symptom Causes - Insert fresh batteries The camera doesn t switch on - There is low battery capacity - An AC Power Adapter is not connected - Batteries are inserted incorrectly with the reverse polarities The camera power ceases whilst in use - The batteries are exhausted - The Camera is turned off automatically - The Adapter plug is not connected securely - Insert fresh batteries - Press the power button to reactivate camera - Remove and
Before contacting a service center Symptom Causes - If the subject is closer than 0.8m, select macro shot mode The images are unclear - A picture was taken within 0.
Before contacting a service center Symptom Causes Colour of image is different to the original scene - White balance setting is incorrect - Select appropriate White balance Images are too bright - Exposure is excessive - Reset exposure compensation - Check the connection cables No image on external monitor - The external monitor has not been connected properly with the camera - There are incorrect files in the memory card - Check the connection When using the PC’s explorer, the [Removable Disk]
Specifications Type Effective Pixel Total Pixel Image Sensor Focal Length Lens F No. Digital Zoom Optical Viewfinder LCD Monitor Type Viewfinder Focusing Range Type Speed Shutter Control Compensation ISO Equivalent Exposure Manual Modes Range Recharging Time Flash Sharpness Effect White Balance Voice Recording Date Imprinting Still Image Shooting Movie Clip 1/2.7" CCD Approx. 3.2 Mega-pixel Approx. 3.3 Mega-pixel SHD Lens f = 5.8 ~ 17.4mm (35mm film equivalent : 38 ~ 114mm) F2.8 ~ F4.
Specifications Media File Format Storage Image Size Capacity (32MB) Image Play Type Editing Interface Power Source Dimensions(W x H x D ) Weight Operating Temperature Operating Humidity Camera Driver Software Application Special Features Multi Memory Card Slot(SD/MMC, Memory Stick Duo compatible) - SD : up to 512MB guaranteed - Memory Stick Duo: up to 128MB guaranteed Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Starting PC Mode Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM]. The image files will then be displayed. 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click [Cut] or [Copy] menu.
Starting PC Mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. - By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Using PhotoImpression With PhotoImpression, you can edit or store still images that you downloaded from the camera. This software is only available in Windows version. To start the program, click [Start The following screen will appear. Programs ArcSoft PhotoImpression PhotoImpression]. [ Help Button ] [ Command Button ] [ Tool Bar ] You can use PhotoImpression to perform the following tasks.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
Downloaded From camera-usermanual.
FAQ [Case 9] When I open the Device Manager (by clicking Start (Settings) Control Panel (Performance and Maintenance) System (Hardware) Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. Right-click on the entry with the question(?) or exclamation (!) mark and select "Remove". Restart the PC and connect the camera the again.
FAQ 1) When the movie clip plays back, only the sound plays back without the image. It isn't compatible with the Mogen MJPEG Decorder. Uninstall the Mogen MJPEG Decorder as following order. Click [Start Run] and a window will open. Type "regsvr32 /u m3jpgdec.ax" and press the Enter key. 2) When the movie clip plays back, the blue and red colors are reversed or the movie clip doesn't open. It isn't compatible with the ffdshow Codec or K-lite Codec Pack. Disable the ffdshow program.
Downloaded From camera-usermanual.
