Instructions Getting to know your camera ƈ Use this camera in the following order Set up the camera driver Take a picture Insert the USB cable Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.66) Take a picture. (p.14) Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.67) Check the camera’s power Check the camera’s power.
Danger DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. ƈ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre. ƈ Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion.
Contents READY ƃSystem chart ƃIdentification of features ƈFront & Top ƈBack & Bottom ƈBottom / 5-function button ƈCradle(Optional) ƈSelf-timer lamp ƈCamera Status Lamp ƈMode icon ƃConnecting to a Power Source ƈUsing the batteries ƃInserting the memory card ƃInstructions on how to use the memory card ƃWhen Using the Camera for the First Time 4 5 5 6 7 7 8 8 8 8 8 9 10 12 RECORDING ƃLCD monitor indicator ƃStarting the recording mode ƈHow to use the AUTO mode ƈHow to use the PROGRAM mode ƈHow to use the MANU
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. System Requirements < Included items > Camera case DPOF compatible printer (see p.46) User manual, Product warranty Camera strap Software CD (see p.65) Computer (see p.67) PictBridge compatible printer (see p.49) SD memory card / MMC (see p.
Identification of features Front & Top Mode dial Shutter button Power button Strap eyelet Speaker Flash Self-timer lamp / Auto focus lamp Lens / Lens cover Microphone ŝ5Ş
Identification of features Back & Bottom Camera status lamp Zoom W button (Thumbnail) Zoom T button (Digital zoom) E (Effects) button LCD monitor +/- button, Delete button Play mode / Printer button 5 function button Tripod ŝ6Ş USB / AV connection terminal Cradle connector
Identification of features Bottom / 5-function button Cradle (Optional) ƈ You can recharge your rechargeable battery (SBP-2524), transfer a captured image to print, and download images with the cradle.
Identification of features ƈ Self-timer lamp Icon Status Blinking Blinking Blinking Description For the first 8 seconds, the lamp blinks at 1 second intervals. For the final 2 seconds, the lamp blinks quickly at 0.25second intervals. For the 2 seconds, the lamp blinks quickly at 0.25-second intervals before taking a picture. A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Connecting to a Power Source INFORMATION Important information about battery usage ƃ When the camera is not used, turn off the camera power. ƃ Please remove the battery if the camera will not be used for long periods. Battery can lose power over time and are prone to leaking if kept inside the camera. ƃ Low temperatures (below 0˚C) can affect the performance of the battery and you may experience reduced battery life. ƃ Batteries will usually recover at normal temperatures.
Instructions on how to use the memory card ƃ Be sure to format the memory card (see p.55) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ƃ Turn off the camera power whenever the memory card is being inserted or removed. ƃ Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Instructions on how to use the memory card INFORMATION ƃ Don't remove the memory card when the camera status lamp is blinking as this may cause damage to data in the memory card. ƈ The camera can use SD Memory Cards and MMC (Multi Media Cards). Please consult the enclosed manual for using the MMC Cards. Card pins Write protect switch Label [ SD (Secure Digital) memory card ] The SD memory card has a write protect switch that prevents image files from being deleted or formatted.
When Using the Camera for the First Time ƈCharge the rechargeable battery fully before using the camera for the first time. ƈWhen the camera is turned on for the first time, a menu will be displayed to set date / time, language and battery type in the LCD monitor. This menu will not be displayed after setting up. Set up the date / time, language and battery type before using this camera. ƃ Setting up the date, time and date type 1.
LCD monitor indicator ƈ The LCD monitor displays information about the shooting functions and selections. ڹ ؋ ؊ No. Description 4 Continuous shot Icons Page p.33 5 Flash / Without Sound p.21~23 6 Self-timer p.23 ؉ 7 Macro p.20~21 ں ڻ ڼ ؈ 8 Metering p.33 9 Card inserted indicator - 10 Auto focus frame - ڽ ؆ 11 Camera shake warning ھ ۇ 12 Date / Time 13 Exposure compensation p.30 ۆ 14 White Balance p.
Starting the recording mode ƈ How to use the AUTO mode ( ) Please select this mode for quick and easy picture taking with minimal user interaction. 1. Insert the batteries (p.9). Insert the batteries taking note of the polarity (+ / -). 2. Insert the memory card (p.9). As this camera has a 20MB internal memory, you do not need to insert the memory card. If the memory card is not inserted, an image will be stored in the internal memory.
Starting the recording mode ƈ How to use the MOVIE CLIP mode ( ) A movie clip can be recorded for as long as the available recording time of the memory capacity allows. ƈ Pausing while recording a movie clip (Successive Recording) This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips. 1. Select the MOVIE CLIP mode by rotating the mode dial. 2.
Starting the recording mode ƈ Night / Portrait / Children mode Rotate the mode dial to select a desired mode. - Night mode : Use this for still images at night or in other dark conditions - Portrait mode : To take a picture of a person - Children mode : To take a still picture of moving children ƈ How to use the SCENE mode ( ) Use the menu to easily configure optimal settings for a variety of shooting situations. These include LANDSCAPE, CLOSE UP, SUNSET, DAWN, BACKLIGHT, FIREWORKS and BEACH & SNOW scenes.
Starting the recording mode ƈ How to use the VOICE RECORDING mode ( ) 1. In any mode with the exception of Movie clip mode, select the VOICE RECORDING mode by pressing the Voice recording button twice. 2. Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time (Max : 1 hour) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the shutter button is released.
Using the camera buttons to set the camera ƈ The recording mode function can be set up by using the camera buttons. POWER button ƃ Used for turning the camera’s power on / off. ƃ If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 54 for more information about the auto power off function. ZOOM W / T button ƃ If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button.
ZOOM W / T button ƃ WIDE Zoom Optical zoom WIDE INFORMATION : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.
Voice recording( ) / Voice memo( ) / UP button ƈ While the menu is showing, press the UP button to move up the submenu. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recording or voice memo ( ) button. You can add your voice-over to a stored still image. Refer to page 17 for more information about the voice recording. Macro( ) / Down button ƈ While the menu is showing, press the DOWN button to move from the main menu to a submenu, or to move down the submenu.
Macro( ) / Down button ƈ Available focusing method, by recording mode (O: Selectable , X: Not selectable, ∞: Infinity focus range) Mode O O O O O Normal X O O X X Macro O X X X X Auto macro SCENE Mode Normal Macro Auto macro ū X X X O X ū X X ū X X O X X Flash ( ƈ When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab.
Flash ( ) / Left button INFORMATION ƃ If you press the shutter button after selecting the Auto, Fill-in, Slow sychro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move until the second flash fires. ƃ Using the flash frequently will reduce the life of the battery. ƃ Under normal operating conditions the charging time for the flash is normally within 6 seconds. If the battery is weak, the charging time will be longer.
Flash ( ) / Left button ƃ Available flash mode, by recording mode Self-timer ( (O : Selectable X : Not selectable) X X O X X X X X X X X X X X O O X X O O X X X X X X O X X X O O X X X X X X X O X X X X O X O X X X X X X X X X O O O O O O O O O O O X O X Self-timer( ) / Right button ƈ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab.
MENU / OK button E (Effect) button ƈ MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICE RECORDING mode is selected. ƈ It is possible to add special effects to your images by using this button.
Special Effect : Colour Special Effect : Preset focus frames ƈ By using the camera’s digital processor, it is possible to add special effects to your images 1. Press the E button in the still image mode or Movie clip mode. 2. Select the ( ) menu tab by pressing the Left / Right button. Normal [Still image mode] ƈ You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. 1.
Special Effect : Preset focus frames ƃ Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 1. Point the camera towards the subject and compose the image by using the LCD monitor. 2. Press the + / - button. 3. The colour of focus frame turns white. Press the Up / Down / Left / Right button to move the focus frame position. 4. To select the focus frame position, press the + / - button again and you can take a picture.
Special Effect : Composite shooting INFORMATION ƃ You can use the flash button, self-timer button, macro button, voice memo button and the Zoom W / T button during the composite shooting. ƃ If you press the Play mode button or press the Voice recording button twice during the composite shots, each camera working mode is executed. When the Menu or E button is pressed, a confirmation window will display. The images captured before will be deleted.
Special Effect : Photo Frame + / - button ƈYou can add 9 types of frame-like borders to a still image you want to capture. 1. Press the E button in any recording mode (except for MOVIE CLIP and AUTO mode). 2. Select the ( ) menu by pressing the Left / Right button. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button. - Photoframe : The photo frame will not be added.
+ / - button ƈ ISO : You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. ƈ White balance : The white balance control allows you to adjust the colours to appear more natural looking. ƃ Selecting an ISO Sensitivity 1. Press the + / - button, and then use the UP and DOWN buttons to select the ISO icon( ). The ISO menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to select the desired ISO sensitivity value.
+ / - button ƃ Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1. Select the CUSTOM ( ) menu of the White Balance. 2. Place a sheet of white paper in front of the camera so that the LCD monitor shows only white, and then press the SHUTTER button. 3. Your custom white balance value is stored.
Using the LCD monitor to set the camera settings ƈ You can use the menu on the LCD monitor to set up recording functions. In any mode with the exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor. ſ The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is being processed. - When there is no battery capacity.
Size Quality / Frame rate ƈ You can select the image size appropriate for your application. Mode Still image mode Movie clip mode ƈYou can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Metering ƈ If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [Multi] : Exposure will be calculated based on an METERING average of the available light in the image Multi area. However, the calculation will be Spor biased towards the centre of the image area. This is suitable for general use. [Spot] : Only the rectangular area in the centre of [ PROGRAM mode ] the LCD monitor will be metered for light.
Sharpness ƈ You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. OSD (On Screen Display) information SHARPNESS Soft Normal Vivid [ PROGRAM mode ] Sub menu Soft Normal Vivid Icon Description The edges of the image are softened. This effect is suitable for editing images on your PC. The edges of the image are sharp.
Starting play mode ƈ If the memory card is inserted in the camera, all the camera functions apply only to the memory card. ƈ If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. ƈ If you have turned on the camera by pressing the POWER button, you can press the PLAY MODE button once to switch to Play mode and press it again to switch to Recording mode. ƈ You can turn the power on with the play mode button. The camera is turned on in play mode.
Starting play mode ƃ Playing back a recorded voice Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded voice file and press the Play & Pause button ( ) to play back a recorded PLAY: voice file. - To pause a recorded voice file, while playing it back, press the play & pause button again. - To resume playback of the voice file, press the play & pause button. - To rewind the voice file while it is playing, press the LEFT button.
Using the camera buttons to set the camera ƈ In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail ( ) / Enlargement ( ) button ƃ You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. ƃ Thumbnail display 1. While an image is displayed full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3.
Thumbnail ( ) / Enlargement ( ) button ƃ The maximum enlargement rate in proportion to the image size. Image size 7M Maximum X12.0 enlargement rate 6M 5M X 11.0 X 10.1 4M 3M 2M 1M VGA X 8.9 X 8.0 X 6.3 X 4.0 X 2.5 ƃ Trimming : You can extract part of the image that you want and save it separately. Trimming? 1. Select an image that you want to enlarge and Yes No press the enlargement button. Confirm:OK 2. Different parts of the image can be viewed by pressing the 5 function button. 3.
Play & Pause ( ) / Down button ƈ In Play mode, the play & pause/ down button works as follows: ƈ It is possible to add special effects to your images by using this button. - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor. - If a still image with a voice memo, a voice file, or a movie clip is playing. In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip.
Delete ( ) button Printer button ƈ This deletes images stored on the memory. ƈ If you select [Computer] sub menu in the [USB] setup menu, [Connecting Computer] message will display when you connect the camera to your printer and the connection will not be established. In this case, press the Printer button. [Connecting Printer] message will display and the Easy printing mode will be selected. ƃ Deleting Images in Play Mode 1.
Left / Right / Menu / OK button ƈ LEFT / RIGHT / MENU / OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. While the menu is not showing, press the LEFT button to select the previous image. - RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move to a secondary menu.
Setting up the play back function using the LCD monitor Menu tab Main menu ROTATE DPOF COPY TO CARD OSD INFORMATION Sub menu Secondary menu Right 90° - Left 90° - 180° - Horizontal - Vertical - Standard Select / All Pics / Cancel Index No / Yes Size Select / All Pics / Cancel No - Yes - Full - Basic - OSD Off - Page ƈ This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable.
Setting up the play back function using the LCD monitor Menu tab Main menu Sub menu Secondary menu Page Auto Type Plain Auto Quality SET Draft Normal Fine p.51 Auto Date Off On Auto File name DPOF PRINT RESET Standard - Index - No - Yes - No - Yes - ſ Menus are subject to change without prior notice. ƃ Start the slide show : The slide show can start only in the [Show] menu. 1. Use the Up / Down buttons to select the [Show] SLIDE menu and press the Right button.
Starting the slide show ƃ Configure slide show effects : Unique screen effects can be used for the slide show. 1. Select the [Effect] sub menu by pressing the SLIDE UP / DOWN button and press the RIGHT button. Show OFF 2. Use the Up / Down button to select the type of Interval Effect effect. : Normal display. Back: Set:OK : Image is displayed slowly. : Image is displayed slowly from the centre outwards. : Image moves from the top left. : The image slides diagonally from top left to bottom right.
Deleting images ƈ Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card. ƃ Deleting images 1. Press the play mode button and press the menu DELETE button.
Rotating an image DPOF ƈ You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [ROTATE] menu tab. 3. Select a desired sub menu by pressing the UP / DOWN button.
DPOF : Standard DPOF : Index ƈ This function allows you to embed printing quantity information on a stored image. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [DPOF] menu tab. 3. Select the [Standard] menu by pressing the UP / DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. [Select] : Selection window for an image to print is displayed.
DPOF : Print size Copy To Card ƈ You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. ƃ Setting the Print Size 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [Size] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
On Screen Display information PictBridge ƈ You can check shooting information about the displayed image. ƃ How to select the type of information you want to see 1. Press the play mode button and press the menu button. 2. Select the [OSD INFORMATION] menu tab by pressing the LEFT / RIGHT button. 3. Select a desired sub menu by pressing the UP / DOWN button and press the OK button. OSD INFORMATION Full Basic OSD Off Exit:MENU ISO : 80 Av : F 2.
PictBridge : Picture Selection ſ If you selected [Computer] in Step 4, when you connected the camera to your printer, the [Connecting Computer] message will display and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward. Or, press the Printer button and the camera is connected to the printer displaying the [Connecting Printer] message.
PictBridge : Print Setting PictBridge : Printing ƈ Custom Set : You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. 1. Use the LEFT and RIGHT buttons to select the [CUSTOM SET] menu tab. 2. Use the UP and DOWN buttons to select the desired sub menu value, and then press the RIGHT button. 3. Use the UP and DOWN buttons to select the desired sub menu value, and then press the OK button.
PictBridge : Printing Setup menu ƈ DPOF Print : This allows you to directly print the files with DPOF information. 1. Use the LEFT and RIGHT buttons to select the [DPOF PRINT] menu tab. 2. Use the UP and DOWN buttons to select the desired sub menu value, and then press the OK button. [No] : Cancel the printing [Yes] : Directly print the file with the DPOF information DPOF PRINT No Yes ƈIn this mode, you can set up basic settings.
Setup menu Menu tab Main menu USB AF Lamp LCD Video Out Quick View Reset Battery type Sub menu Secondary menu Computer - Printer - Off - On - Dark - Normal - Bright - NTSC - PAL - Off / 0.5, 1, 3 sec - No - Yes - Alkaline - Ni-MH - ſ Menus are subject to change without prior notice. Page p.56 p.56 p.56 p.57 p.57 p.58 p.58 [ File name ] ƈ This function allows the user to select the file naming format. ƃ Assigning File Names 1.
Setup menu [ Auto power off ] [ Language ] ƈ This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. ƈ There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. ƃ Sub menus [Off] : The power off function will not operate. [1, 3, 5, 10 min] : The power will turn off automatically if not used for the period of time specified.
Setup menu [ Formatting a memory ] [ Setting up the Date / Time / Date type ] ƈ This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. ƈ You can change the date and time that will be displayed on the captured images and set up the date type. ƃ Sub menus [No] : The memory will not be formatted.
Setup menu [ Sound ] [ Auto Focus lamp ] ƈ If you set sound to ON, various sounds will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status. ƈ You can turn on and off the Auto Focus lamp. ƃ [Sound] sub menu : Off / Low / Medium / High SETUP Language Format Date&Time Imprint Sound Off Low Medium High Back: ƃ Sub menus [Off] : The AF lamp will not light up in a low light condition. [On] : The AF lamp will light up in a low light condition.
Setup menu [ Selecting Video out type ] ƈ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. ƈ Connecting to an external monitor ƃ Using the USB cable with Cradle (Optional) : Connect the camera and the cradle. Connect the cradle to an external monitor with the supplied AV cable.
Setup menu Setting up the Mycam menu [ Initialisation ] ƈ All camera menu and function settings will be restored to their default values. However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed. ƃ Sub menus [No] : Settings will not be restored to their defaults. [Yes] : All settings will be restored to their defaults. ƈ You can set up a start up image, start up sound and shutter sound. Every camera working mode (with the exception of Voice recording mode) has the MyCAM menu.
Start up sound Important notes ƈ You can select the sound that is activated whenever the camera is turned on. Be sure to observe the following precautions! ƃ Start up sound : [Off], [Sound 1], [Sound 2], [Sound 3] - If the start up image is set to [Off], the start up sound will not activate, even though you may have set these to on. ƈThis unit contains precision electronic components. Do not use or store this unit in the following locations.
Important notes ƈ Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur in the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.
Warning indicator ƈThere are several warnings that may appear on the LCD display Card Error! ҮMemory card error ƍ Turn off the camera power and turn it on again ƍ Insert the memory card again ƍ Insert the memory card and format the memory card. (p.
Before contacting a service centre Camera does not take images when pressing the Shutter button ҮThere is insufficient memory capacity ƍ Delete unnecessary image files ҮThe memory card has not been formatted ƍ Format the memory card (p.55) ҮThe memory card is exhausted ƍ Insert a new memory card ҮThe memory card is locked ƍ Refer to [Card Locked!] error message ҮThe camera’s power is off ƍ Turn the camera power on ҮThe battery is exhausted ƍ Insert fresh batteries. (p.
Before contacting a service centre No image on external monitor ҮThe external monitor has not been connected properly with the camera ƍ Check the connection cables ҮThere are incorrect files in the memory card ƍ Insert a memory card that has correct files When using the PC’s explorer, the [Removable Disk] file does not show ҮCable connection is incorrect ƍ Check the connection ҮThe camera is off ƍ Turn the camera on ҮThe operating system is not Windows 98, 98SE, 2000, ME, XP/ Mac OS 9.2 ~ 10.3.
Specifications ƈ White Balance : Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom - Capacity (256MB MMC) ƈ Voice Recording : Voice Recording (max.1 hour), Voice Memo in Still Image (max. 10 sec.
Software Notes About the software Please ensure that you read the instruction manual carefully before use. ҮThe attached software is a camera driver and image editing software tool for Windows. ҮUnder no circumstances should all or part of either the software or the user manual be reproduced. ҮCopyrights for software are licensed only for use with a camera. ҮIn the unlikely event of a manufacturing fault, we will repair or exchange your camera.
Setting up the application software ƈ To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. ƈ You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean 1. The auto run frame will display. Click the [Install] menu in the Auto run frame. 2.
Setting up the application software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognize the camera. ſ If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was setup successfully.
Starting PC mode ƈ Connecting the camera to a PC ƈ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. [Using the USB cable with Cradle (Optional) ] 2. On your computer's desktop display, select [My computer] and double click [Removable Disk ƍ DCIM ƍ 100SSCAM]. The image files will then be displayed.
Starting PC mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. Removing the removable disk ƈ Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. ƈ Windows 2000/ME/XP (The illustrations may differ from those shown depending on the Windows O/S.) 1.
Removing the removable disk 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 9.2 ~ 10.3. 3. Connect the camera to the Macintosh and turn the camera power on. 4.
Removing the USB Driver for Windows 98SE ƈ To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager. Digimax Master ƈ You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows except for the Windows 98.
Digimax Master 4. Select a destination and make a folder to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, images will be downloaded. ƃ Image viewer : You can view the stored images. ڹ ڽ ھ ڿ ں 5. Click [Next >] button. ڻ 6. A window will open as shown alongside.
Digimax Master ƃ Image edit : You can edit the still image. ƃ Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ڹ ڹ ڼ ں ں ڻ - Image edit functions are listed below. ڹEdit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Adjust] : You can modify image quality. See the [Help] menu. [Retouch] : You can change image or insert effects on the image. See the [Help] menu.
FAQ ƈ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. ƍ Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. ƍ Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer.
FAQ ƃ When the DirectX 9.0 or later is not installed ƍ Install the DirectX 9.0 or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive:\ USB Driver\DirectX 9.0] folder and click the DXSETUP.exe file.The DirectX will be installed. Visit the following site for downloading the DirectX.http://www.microsoft.com/directx ƃ If a PC (Windows 98) stops responding while the camera and PC are connected repeatedly.
FCC notice ƈ NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications.
SAMSUNG TECHWIN CO., LTD. SAMSUNG OPTO-ELECTRONICS FRANCE S.A.S. TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086, 8088, 8090, 8092, 8099 FAX : (82) 31-740-8398 www.samsungcamera.com TOUR MAINE MONTPARNASSE 33, AVENUE DE MARINE 75755, PARIS CEDEX 15, FRANCE TEL : +33 (0)1 4279 2200 FAX : +33 (0)1 4320 4510 www.samsungphoto.fr 7 PINGCHANG ROAD NANKAI DIST., TIANJIN P.
