CONTENTS Ⅰ. S P E C C I F I C A T I O N 1. SPECIFICATION ……………………………………………………………………………………………… 4 2. SYSTEM REQUIRMENT ……………………………………………………………………………………… 4 Ⅱ . F A Q s ……………………………………………………………………………………………………………5 Ⅲ. EXPLODED VIEW AND PARTS LIST 1. BODY ASSEMBLY ………………………………………………………………………………………… 18 2. BODY ASSEMBLY ……………………………………………………………………………………… 20 3. FRONT COVER ASSEMBLY ……………………………………………………………………………22 4. BACK COVER ASSEMBLY ………………………………………………………………………………… 24 5.
Ⅰ. SPECIFICATIONS Image Sensor Lens 1/1.8" CCD, Approx. 3.2Mega pixels(Effective Pixels) f=7.0∼21.0mm(35mm film equivalent 34∼102mm) F 2.6 ~ F4.7 Digital Zoom Still image mode : 1.5x, 2x Play mode : Large(1.5~5x) / Medium(1.5~3x) / Small(1.5x) View Finer Real Image Zoom Optical Viewer LCD Monitor 1.5" TFT Color LCD Monitor(117,600dots, 490x240) Focusing TTL autofocus/fixed focus(1.0m, 2.5m, infinity) Focus Range Normal : 0.
Ⅱ. FAQs Ⅰ. Digimax 350SE software introduction ▶ USB Storage Driver USB Storage Driver makes digital camera operate as USB connection cared reader device. If you set up driver, you can see and copy pictures of digital camera in PC directly. In case of this camera, USB Storage Driver is supported for only Windows. Driver for Macintosh is not supported additionally, but you can use in Mac OS 9.X. ▶ Digimax Viewer In this program, You are able to check image-stored in Camera-automatically through PC monitor.
Ⅱ. FAQs < For Windows > - Our company aren't responsible for case of using Personal Computer isn't guaranteed from manufacturer like assembled PC. ▶ When installing Q1. How can I check of the USB Interface available in my PC? A1. First, Check if the USB ports located in the back of the body or keyboard to connect the USB cable as shown in the figure. Second, Check if [Universal Serial Bus(USB) Controller] located in the System Device Manager.
Ⅱ. FAQs Second, You need 5~10seconds for running the automatic setup program according to the capaility of the computer. If the frame is not displayed even after this, run the「Windows Explorer」and select「Samsung.exe」in the CD-ROM drive root directory. Third, Without running the Auto Installation Screen, run the「Windows Explorer」and install the S/W directly at the desired program folder of CD-ROM root directory. - USB Storage Driver : Run「Setup.
Ⅱ. FAQs Q6. How can I check if the USB Storage driver has been installed successfully? A6. Connect camera to the PC with the provided USB cable and turn it on at the PC mode. Then the following is shown. (1) Removable disk appears. (2) In the system properties, the device state is indicated as 'The device is working properly'.
Ⅱ. FAQs < Win ME > - Disk drives : Samsung Removable Disk - Universal Serial Bus controller : Samsung USB Mass Stroage Device - Storage device : USB Disk < Win 2K / XP > - Disk drives : Samsung Removable Disk USB Device - Universal Serial Bus controller : Samsung USB Mass Storage Device - storage volume : general volume (3) Please check as belows files are installed or not. < Windows 98 / 98SE > chiosmsd.inf, D350SE.inf : Windows/inf/other chiosmsd.pdr : Windows/system/iosubsys coachmsd.
Ⅱ. FAQs Q7. I connected camera to computer by PC mode but warning message came out; can't find a driver fitted for device and set up as unknown device. What should I do? A7. USB Storage Driver for Digimax 350 is not set up or set up by wrong way. After preferring manual page 111~112, set up USB Storage Driver correctly. Also, first connecting a camera, if you are trying to set up driver, this problem happens. After you must USB Storage Driver, connect a camera and use it.
Ⅱ. FAQs Q8. Power on camera, after connecting to computer, computer doesn't work when power on computer. A8. Depend on computer, at the moment of Power is on, may not work with outer device. In this case, after power on computer, connect USB cable and power on camera, then convert to computer connect mode Q9. If using the VIA chipset A9. If using the VIA chipset, USB communication might not operate normally in some case.
Ⅱ. FAQs ▶ When playing moving image Q1. When opening the moving image photographed by camera, it is not open. A1. The video decoder for Digimax 350SE was not installed. Please install the video decoder. However, video decoder is installed automatically during installing Storage Driver of Driver-CD. Put the provided Driver-CD into CD-ROM Drive. Play the「Windows Explorer」and then click「JPEG-Decoder」folder in the CD-ROM Drive folder. The frame below is displayed when you select「Jpegcode.
Ⅱ. FAQs If pressing「OK」button, the screen will be displayed as shown in the following figure. This time, if pressing「OK」button, installation is automatically completed. If Auto Installation does not operate, select Copy files from as「JPEG-Decoder」folder and then press「OK」button. If installed normally,「JPEGCODE[JPEG]」and「JPEGCODE[MJPG]」will be displayed on 「Video Compression codecs」in「Multimedia properties」.
Ⅱ. FAQs Please install the QuickTime for replaying AVI files. You can download QuickTime from http://www.apple.com/quicktime/download for free, and it is trademark of Apple Computer, Inc. ▶ USB Storage Driver use (Removable disk usual) Q1. When trying to use camera as Removable disk connecting with PC, screen comes out as below. A1. The camera doesn't have memory card. After inserting memory card, use it. Q2.
Ⅱ. FAQs Q4. When I record random file not to photograph with Digimax 350SE from computer to camera, what should I do? A4. When you record random file not to photograph with this camera from computer to camera, message "Wrong file" displays in screen view, appears black in Thumbnail. It can be impossible to check in Camera. Q5. I copied a file from computer to camera, but it wasn't recorded in camera. A5. Because you operate a camera during you are working on PC.
Ⅱ. FAQs Q7. When moving image is playing in Removable disk, it looks like photograph cutting off. A7. If image is playing in memory directly, it may cause photograph cut off. Before you see photograph, copy files to hard disk of PC and play it. ▶ Digimax Viewer Use Q1. If camera is connected, Viewer program operates automatically, but it didn't operate for me. What should I do? A1. (1) Check to adjust PC mode of camera. (2) Check to set up Digimax Viewer program.
Ⅱ. FAQs - When purchsing Macintosh computer, check installed over MacOS 9.0 and USB Mass StorageSupport 1.3.5 - Not guarantee of USB operating in PC has Mac OS and Mac OS USB Mass Storage Support upgrading. Q1. Is Driver supported for Macintosh ? A1. It is not additionally for Macintosh, but you can use this driver in over Mac OS 9.X Connect a camera to Macintosh with USB cable, after power on, it is recognized as Unknow name disk automatically. Q2.