User guide
74
Chapter 3.
Using the computer
Using the TV
(Optional)
3
When the auto scanning is complete, the default TV channel
will be run.
* To switch to digital TV channels from an analog channel,
click TV/AV.
Resetting the channels
Select Home > Settings > Channel. Then select Scan. The
scanned channels are saved.
If you encounter problems scanning channels, select Reset
TV Signal > One-click Wizard. Then, the scanning will be
performed again from the start.
Note on Conguration
The setup procedures may dier depending on the current •
type of your TV service.
You should set the product to the region and postal code •
where your computer is currently installed.
If the TV signal provider setup screen appears, select the •
correct provider. If the congured provider is not correct, not
all of the channels will be received or the TV picture quality
may be degraded.