User Manual (Windows8.1)

Basics
33
Configuring the TV
•
The screenshots and terms used in the user manual
may differ from the actual ones.
•
The screen and menu titles of the TV program (ATIV TV)
may differ depending on the version.
1
Click Start Screen
→
TV programs (ATIV TV).
2
Click Start on the main screen.
The built-in TV tuner starts scanning channels available.
3
When the auto scanning is complete, the default TV channel
will be run.
Resetting the channels
In the lower right corner of the smartphone, select
Menu
→
Settings
→
Reset TV Signal .
The scanned channels are saved.
Note on Configuration
•
The setup procedures may differ depending on the current
type of your TV service.
•
The area must be set to the country of your current residence.
Using the TV (Optional)
Products embedded with a TV tuner card (Optional) can use the
TV function.
After connecting to the antenna, you can watch TV by using the
corresponding TV program.
You can only use the TV function when the TV tuner card
(Optional) is installed.
Connecting the TV Antenna
You must connect the TV tuner card (Optional) to the TV
antenna
. Connect the antenna cable to the TV antenna input
port
.