User guide

SAVE NUMBER WITH REDIAL

To save the number you just dialed for later use, press the SNR key before

hanging up.

To redial this saved number at any time, press the SNR key or dial 17. The

same line will be selected for you.

NOTES:

1. If the Hot Keypad feature has been turned off, you must first lift the hand-

set or press the SPEAKER key before you begin dialing.

2. The saved telephone number is stored in memory until you save anoth-

er number.

3. Redial does not apply to intercom calls.

CHAIN DIALING

You may manually dial additional digits following a speed dial number or

chain as many speed dial numbers together as required:

• After the first speed number is dialed, press MEMORY again and dial an-

other speed number OR manually dial additional digits following a

speed dial number.

AUTOMATIC REDIAL/RETRY

When you are making an outside call and you receive a busy signal, the sys-

tem can automatically redial the number for you. It will automatically redial at

a pre-programmed interval for up to 15 attempts.

• When you hear a busy signal, press the RETRY button.

• The system will reserve the line and automatically redial the same num-

ber for you. You will hear the call being made through the keyset speak-

er. The microphone is muted.

• When the called party answers, lift the handset or press the flashing

SPEAKER to begin speaking.

NOTES:

1. If you make another call, auto-redial is canceled.

2. To cancel a retry, lift and replace the handset.

idcs_16.qxd 12/14/2004 3:42 PM Page 31

PULSE TO TONE CHANGEOVER

When making an outside call on a dial pulse line, press #. All digits dialed

after the # with be sent as tones.

idcs_16.qxd 12/14/2004 3:42 PM Page 32