DSB-A100F Instructions for use GB MF68-00312A DIGITAL SATELLITE RECEIVER REV. 1.
DSB-A100F SAFETY INSTRUCTIONS This STB has been manufactured to satisfy international safety standards. Please read the following recommended safety precautions carefully. AC 100-240V~, 50/60Hz OVERLOADING: Do not overload wall outlets, extension cords or adapters as this can result in fire or electrical shock. LIQUIDS: Keep liquids away from the STB. CLEANING: Before cleaning, disconnect the STB from the wall socket. Use a cloth lightly dampened with water(no solvents) to clean the exterior.
GB-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. LOCATION OF THE RECEIVER DSB-A100F DSB-A100F CONNECTING YOUR "STB" CONNECTING YOUR “STB” Connecting Figure Your “STB” should be placed under proper ventilation. Don’t put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating. The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets. Avoid stacking other electronic components on the top of the receiver.
DSB-A100F DSB-A100F DESCRIPTION DESCRIPTION Rear Panel Front Panel 2 1. 3 4 5 6 1 2 3 4 5 6 7 This key is for turning the receiver on and Standby. 1. AC MAINS This key is for entering and confirming any data to the receiver in the menu system. This key is for selecting the item. Press while viewing TV and a list of channels is displayed. This is to plug in the AC mains power cord. The input AC voltage range is 100V to 240V~, 50Hz/60Hz supply. 2.
DESCRIPTION DSB-A100F DSB-A100F DESCRIPTION Remote Control Unit 1. POWER This is for switching the receiver ON/STANDBY mode. 10. ALT(YELLOW) This key is for selecting the soundtrack list for the current service. This key functions same as the YELLOW key on the menu. Press it once and sound track appears. Press it twice and video track appears. The sound and video track services are not provided for every channel and depend on the conditions the operator is in.
DSB-A100F DSB-A100F BASIC FUNCTIONS BASIC FUNCTIONS 3. Select Soundtrack 1. Display Screen ● Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first. After the television channels have been programmed, you will see the following picture(banner) each time you switch channels: ● Press YELLOW(ALT) key to see the soundtrack list. Press / and OK key to select one. Channel Number 4.
BASIC FUNCTIONS 6.1 Service Favorites 7. Program Information Press the GREEN(TEXT) key on the control unit to select the Favorites list. ● Press the GREEN(TEXT) key to switch between favorite list and channel list. ● Use the / , PG+/PG- keys to select a favorite group or a channel that you want. EPG-Electronic Program Guide The electronic program guide gives you information for the channels. 6.2 Service Alphabetical ● ● Note : 1. This service depends on service provider. 2.
BASIC FUNCTIONS 9. Teletext OSD 12. Near Video on Demand (NVOD) When the current broadcasting program provides Teletext, press the GREEN(TEXT) key twice to see the current language list for Teletext in order to get teletext in OSD regardless of TV type. [T] at the right corner on the banner shows that Teletext is available on this event(program). Even [T] is displayed on the banner, Teletext may not be available due to broadcasting.
Main Menu 1.1 LNB Setting After installing your antenna system and STB with appropriate connectors. You can select the satellite and LNB setting conditions to execute channel search and you can alter the settings for 22KHz tone. The parameters set in this menu are needed for programming the channels for the “Auto scanning” and “Manual scanning”. The necessary information can be found at your antenna and LNB brochures, or you can ask your dealer. ● ● Plug in the AC main power and switch on the receiver.
OPERATING THE RECEIVER 1.2.1 User Mode 1.3 Solarsat Setting Select Driving Mode: You have an option to choose the positioner’s movement type: Continuous, Step or Time. ● Position the antenna with north, south, east and west and use the / / / key to drive motor. key drives to west, key drives to east, key drives to north and key drives to south. ● If you finished driving of motor, select “Store current Position.” and press OK key, to reset new driving motor.
OPERATING THE RECEIVER 1.5 Manual Scanning 1.6 SMATV Scanning To tune-in new channels and weak signals, the STB has been provided with the option “Manual Scanning” where the channel data can be entered by the user. After selecting the “Manual Scanning” from the Installation Menu, the following screen will be displayed: In case that several generations use Antenna and LNB in common, search the service the from 950 to 2150MHz.
OPERATING THE RECEIVER 2. Channel Organising 2.4 Delete All Channels The “Channel Organising” menu has seven functions: This menu is for removing some channels from channel list which are related with designated Satellite or Transponder. And it provides making favorite list and moving channel position as you want. At the request window, press OK key to delete all channels and press EXIT to exit. ● DSB-A100F DSB-A100F OPERATING THE RECEIVER Enter the PIN Code.
OPERATING THE RECEIVER 2.7 Move & Edit Channel 3. Parental Lock Select the TV/RADIO list with / or TV/RADIO key. ● Select a channel in the TV or Radio list with / or PG+/PG- keys or numeric keys. ● Select channel by pressing the RED( i ) key. ● Press the / or PG+/PG- keys to change the position of the channel you want, and press the OK key for confirmation. ● If you want to return the channel to the initial position, do not press the OK key but press the BLUE(AUDIO) key.
OPERATING THE RECEIVER 3.2 Change PIN Code 4.2 OSD Setting To change the PIN Code, select the second option “Change PIN Code”. You can set the OSD transparency, the display time, Color Scheme and OSD Position. This will take you to the following menu: ● In this option, you need to enter the current PIN Code at the first cursor, and at the second cursor enter the desired PIN Code. To confirm, you need to enter the new PIN Code again. Select OSD Transparency level.
OPERATING THE RECEIVER To set User defined mode or EPG color mode 4.4 Time & Timer Setting Press the GREEN(TEXT) key. The item which you want to change will appear. ● Move the item which you want to change using the / keys. ● Set the color you want using the / keys. ● Press the OK key to set. 1) Time ● ● ● Place the cursor on this sub menu and press OK. Press / keys to change local time in Time Zone. The local time will be changed according to your location.
OPERATING THE RECEIVER 4.5 System Information 4.7 Copy Channel Data If you have to contact your service provider or a service center they might ask for information available from this menu. Place the cursor on this sub menu and press the OK key. The following will be the on-screen display. If you want to copy the channel data from one receiver to another, please follow the instruction below. Please make your own channel data, such as favorite & lock channel with your own master box.
TECHNICAL SPECIFICATIONS Power supply Possible cause Solution of the problem No display LED on the front panel; No power supply Power cord not plugged in correctly Power cord plug in correctly No pictures on the screen Receiver in Standby mode; RCA not connected tightly to video output of television; incorrect channel or video output selected on television Set receiver to “On”; Check connection and correct; Audio cord connected incorrectly; Loudness level = 0; Muting active Check connection and co
MEMO DSB-A100F DSB-A100F TECHNICAL SPECIFICATIONS A/V output RCA JACK : VIDEO (CVBS), AUDIO R&L RF modulator Modulator output : Video type : UHF output level : Output connector : Ant. O/P connector : Tuning method : CH 21_69 (preset to CH 21) PAL B/G, I, D/K 70 ± 5 dBµV IEC male IEC female PLL frequency synthesizer Standard : Connector type : GB Serial data interface RS232C, Max. 115.