Heat Pump Dryer User manual DV9*N82****/DV9*N62****/DV8*N62**** Untitled-32 1 12/11/2018 6:47:09 PM
Contents Safety information 4 Contents What you need to know about the safety instructions Important safety symbols Important safety precautions To minimize the risk of fire in a tumble dryer, the following should be observed Critical installation warnings Critical usage warnings Usage cautions Critical cleaning warnings 4 4 5 8 9 11 12 14 Installation 15 What’s included Installation requirements Levelling Drain hose (if necessary) Installation checklist Before using the dryer Door reversal (DV9*N62*
50 Checkpoints Information codes 50 52 Appendix 53 Fabric care chart Protecting the environment Specification Consumption data 53 54 55 56 English 3 Untitled-32 3 12/11/2018 6:47:09 PM Contents Troubleshooting
Safety information Congratulations on your new Samsung dryer. This manual contains important information on the installation, use, and care of your appliance. Please take the time to read this manual to take full advantage of your dryer’s many benefits and features. What you need to know about the safety instructions Safety information Warnings and Important Safety Instructions in this manual do not cover all possible conditions and situations that may occur.
Important safety precautions WARNING 1. This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 2.
Safety information 7. For use in Europe: Children of less than 3 years should be kept away unless continuously supervised. Safety information 8. CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility. 9. The tumble dryer is not to be used if industrial chemicals have been used for cleaning. 10.
17. The final part of a tumble dryer cycle occurs without heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged. 18. Remove all objects from pockets such as lighters and matches. 20. Exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other fuels. 21.
Safety information To minimize the risk of fire in a tumble dryer, the following should be observed CAUTION Safety information Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in a tumble dryer. Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat.
Items such as foam rubber(latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the tumble dryer. Fabric softeners, or similar products, should be used as specified by the fabric softener instructions. Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat.
Safety information Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth on a regular basis. • • Unplug the power plug and clean it with a dry cloth. Failure to do so may result in electric shock or fire. Keep all packaging materials well out of the reach of children, as packaging materials can be dangerous to children. Safety information • If a child places a bag over its head, it may result in suffocation.
This appliance should be positioned so that the power plug, the water supply taps, and the drain pipes are accessible. Critical usage warnings WARNING • • Safety information Do not let children or pets on or into the product. In addition, when disposing of this product, disassemble the door lock (lever). This may result in children falling and injuring themselves. If children become locked in the product, there is a danger of suffocation.
Safety information Do not attempt to repair, disassemble, or modify the appliance yourself. • • • Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse. When repairing or reinstalling the appliance is required, contact your nearest service center. Failure to do so may result in electric shock, fire, problems with the product, or injury. The product you have purchased is designed for domestic use only.
Do not dry clothing with large buckles, buttons, or other heavy metal (zippers, hooks and eyelets, button-up covers). If necessary, use the laundry net for small and lightweight laundry such as fabric tie belt , apron strings, and underwire bras which can dissolve or break during a cycle. Dryer sheets are compatible with this model, and are recommended for better drying performance. Do not use the dryer near dangerous powders such as coal dust, wheat flour, etc.
Safety information Critical cleaning warnings WARNING Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner or alcohol to clean the appliance. • This may result in discoloration, deformation, damage, electric shock or fire. Safety information Before cleaning or performing maintenance, unplug the appliance from the wall socket. • Failure to do so may result in electric shock or fire. Clean the filter case before and after using the dryer.
Installation What’s included Carefully unpack the dryer. Keep all packaging materials away from children. The parts and location of parts shown below may differ from your dryer. Before installation, make sure the dryer has all the parts listed here. If the dryer and/or parts are damaged or missing, contact the nearest Samsung customer service centre.
Installation Accessories (supplied) Installation Hose guide Cable tie Hose connector Long drain hose (2m) User manual Rack Dry (applicable models only) Cleaning brush Accessories (not supplied) Bracket-Stacking kit (SK-DH, SK-DA, SKK-DF) Stacking kit (SKK-DD, SKK-DDX) NOTE • • • The stacking kit allows the dryer to be stacked on top of a washer. Please note that the stacking kit can only be used with Samsung washers and dryers.
Installation requirements NOTE This dryer must be installed by a qualified installer. If service is required due to poor or faulty installation, it is considered the owner’s responsibility and may void the warranty. Keep these instructions for future reference. WARNING • • • • • • • • English 17 Untitled-32 17 12/11/2018 6:47:13 PM Installation • • Do not plug the power cord into a wall outlet before the dryer is completely installed. Have two or more persons help move the dryer.
Installation Location requirements Select a level, well-constructed surface that will withstand vibrations. Select a location where a grounded, 3-prong outlet is easily accessible. WARNING • • • • • Install the dryer indoors only. Do not install the dryer in areas exposed to the weather. Do not install the dryer where the temperature may fall below 5 °C or rise above 35 °C. Do not install the dryer where gas may leak. Do not block the cooling grill’s air inlet located at the dryer front.
Levelling Before you install the dryer, make sure you have read Installation requirements on page 17. Please note that the following instructions are for installation without using a drain hose. For instructions for using a drain hose, see the next section, Drain hose (if necessary). For convenience, consider installing the dryer next to your washer. 1. Gently put the dryer on the desired location. A 2. Use a level (A) and check the levelness of the dryer from side to side and front to back. 4.
Installation Drain hose (if necessary) The dryer comes with a built-in water tank. However, if you do not want to use the water tank, you may install the drain hose. The provided accessory hose (long drain hose) can be used as an extension to the drain hose. Installation 1. Remove the drain hose from hole (A), and insert it into hole (B).
2. Insert one end of the accessory hose (long drain hose) into hole (A). 3. Insert the other end (outlet) of the accessory hose to the drainage system in one of the following ways: A Over a wash basin: 2. To bend some point of the accessory hose, use the supplied plastic hose guide (B) and secure the guide to the wall with a hook or to the tap with a piece of string. Assemble the drain hose (A) and the hose guide (B) and fix them with the cable-tie (C). A 3.
Installation By using the drain pipe of the wash basin: 1. Assemble the hose connector (A), and attach it to the end of the accessory hose as shown. A CAUTION To prevent water leak, make sure to connect the hose and the connector firmly. Installation 2. Connect the hose adaptor directly to the drain pipe of the wash basin.
Installation checklist • • • • • • The dryer is plugged into a properly grounded outlet. All packaging material is completely removed and properly disposed. The dryer is level and standing firmly on the floor. Start the dryer to make sure that it runs, heats, and shuts off. Run a TIME DRY cycle for 20 minutes to see if the HC information code is displayed. If this is the case, contact a local service centre. After installation, we recommend that you wait at least 1 hour before using the dryer.
Installation Door reversal (DV9*N62****/DV8*N62**** only) You might want to reverse the direction of the door, depending on your site conditions or to your needs. WARNING Make sure door reversal is performed by a qualified technician. 1. Remove the door packing from the door. Installation 2. Remove the screws on the inner glass holder of the door. - First, loosen and remove the 3 screws on the bottom. Then, loosen and remove the 3 screws on the top of the holder.
3. Detach the glass holder. CAUTION Use caution not to drop any part of the holder when detaching it. Property damage (cracks or breaks) or physical injury may occur. - Loosen and remove the 2 bolts on the door frame. To prevent abrasion on the bolts, use a hex screwdriver. 5. Remove the upper screw on the left of the door frame, and then insert it in the corresponding right hole of the door frame. Do not remove the lower bracket screws.
Installation 6. Remove the 2 bracket screws on the right frame, and then remove the 2 holder screws on the left frame. Installation 7. Insert the 2 removed bracket screws in the left frame as shown. - See the figure on the right for the correct position of the screws. 8. Remove the bottom screw on the left frame, and then insert it in the corresponding hole on the right frame.
9. Insert the lever holder on the right frame, and then tighten the 2 holder screws. 11.Insert the inner glass holder in the door cover that has been installed on the left frame. English 27 Untitled-32 27 12/11/2018 6:47:17 PM Installation 10.Insert the door hinge in the opposite position of the door frame, and then, tighten the 2 bolt screws.
Installation 12.Tighten the 3 holder screws on the top. Then, tighten the 3 holder screws on the bottom. 13.Attach the door packing to the door. Installation Environment Please dispose of the packaging materials for this product in an “environmentally friendly” manner. For further detail, please contact your local area authority.
Operations Control panel 01 07 08 09 11 02 10 03 04 05 06 Displays all cycle information, including cycle time, information codes, and dryer status. See the table below for status details. Cooling Heat-exchanger clean alarm Delay End Water Tank Full Smart Check Child Lock Damp Alert Wi-Fi Wrinkle Prevent Operations 01 Digital Graphic Display Check filter alarm Drying 02 Cycle Selector Turn the dial to select a cycle. See the Cycle overview on page 31 for available cycles.
Operations Operations 05 Damp Alert This alert is available only with COTTON, MIXED LOAD, SYNTHETICS and SILENT DRY (DV9*N82**** models only) cycles. If a load contains mixed fabrics, the Damp Alert indicator ( ) blinks when the average dryness of the item is 80 % dry. This lets you take items that you don’t want fully dried or that dry quickly out of the dryer early while letting others continue to dry.
Cycle overview Optimal Dry Cycle Description Max load (kg) For cottons, bed linen, table linen, underwear, towels, and shirts. COTTON ‘COTTON Dry Level 3’ is the test programme used for energy labelling in accordance with AS/NZS 2442. MAX SYNTHETICS For blouses, and shirts that are made of polyester (Diolen, Trevira), polyamide (Perlon, nylon), or other similar blends. 4 DELICATES For items to be handled with care such as lingerie.
Operations Cycle WOOL Description For machine washable and tumble dryable wool only. For best results, turn laundry inside out before drying. Max load (kg) 2 OUTDOOR CARE For outdoor wear such as skiwear and mountain clothing, and also for fabrics such as spandex, stretch, and microfiber. It is recommended to use this cycle after you have washed your laundry using the OUTDOOR CARE cycle with your washing machine. 2 BEDDING For bulky items such as blankets, sheets, comforters, and light duvets.
Manual Dry Cycle QUICK DRY 35' Description For drying light cotton synthetics or items that needs quick drying. The default dry time is 35 minutes. Max load (kg) 1 Use to set a desired dry time. 1. Turn the Cycle Selector to select TIME DRY. TIME DRY 2. Press Dry Time to set the drying time between 30 minutes and 150 minutes. Keep pressing Time cycles through the available time options in 30-minute increments. – NOTE The actual cycle time may differ depending on the dryness of items.
Operations Cycle chart NOTE For best results, follow the load size recommendations for each dry cycle. • • • Large load: Fill the drum to about ¾ full. Do not add items over this level as they need to tumble freely. Medium load : Fill the drum to about ½ full. Small load : Fill the drum with 3-5 items, not more than ¼ full. Cycle COTTON Recommended items For cottons, bed linen, table linen, underwear, towels, and shirts. Load size Dry Level MAX Available 4 SYNTHETICS Synthetic or blended fabrics.
Cycle Recommended items BEDDING For bulky items such as blankets, sheets, comforters, and light duvets. Load size 2 Dry Level Unavailable Getting started Simple steps to start 1. Press Power to turn the dryer on. 2. Load the dryer and close the door. 3. Turn the Cycle Selector to select a cycle. 4. Change the cycle settings (Dry Time, and Dry Level) as necessary. 5. Select necessary settings and options to your preference. (Damp Alert, Wrinkle Prevent, Alarm Off, and/or Delay End). Operations 6.
Operations Rack Dry (applicable models only) Set the drying time up to 150 minutes according to the moisture and weight of the items to dry. When drying laundry using the drying rack, the TIME DRY cycle is recommended. 1. Position the drying rack in the drum, inserting the front lips of the rack into the holes of the door diaphragm. Operations A 2. Place items on the rack, leaving enough space where air can circulate. For clothing items, fold and place flat on the rack.
Drying suggestions Items (max 1.5 kg) Washable sweaters (block to shape and lay flat on rack) Stuffed toys (cotton or polyester fibre filled) Description When drying the laundry using the rack, fold and place the clothes on the rack to prevent the clothing from becoming wrinkled. Stuffed toys (foam or rubber-filled) Foam rubber pillows Sneakers To dry sports shoes, place the shoes on the rack so that the soles of the shoes are facing downwards.
Operations Cycle guide Always follow the care label when drying. If care label instructions are not available, refer to the following table. Operations Bedspreads and comforters • Use the High temperature settings. Blankets • For best results, dry only one blanket at a time. Cloth diapers • Use the High temperature settings. Down-filled items • Do not dry on a heat setting. Doing so may cause a fire hazard. Only use the COOL AIR (DV**N62**** models only) cycle.
Special features Delay End Smart Check You can set the dryer to complete a selected cycle at your set time. If the dryer has detected an issue, Smart Check allows you to check the status of the dryer using a smartphone. Please note that Smart Check can only be used for Galaxy and iPhone series smartphones. 1. Select a cycle with necessary options. 2. Press the - or + Delay End buttons to set a time between 1 to 24 hours in 1-hour increment. 3. Press and hold Start/Pause (Hold to Start).
Operations SmartThings Wi-Fi connection On your smartphone, go to the Settings and turn on the wireless connection and select an AP (Access Point). NOTE • • • • • Operations • • • • • • This device is designed for household use only (Class B), and can be used in all residential areas. This device may cause wireless interference, and neither the manufacturer or the installer of this device can provide a safety measure of any kind. Recommended encryption methods are WPA/TKIP and WPA2/AES.
Log in You must first log into SmartThings with your Samsung account. To create a new Samsung account, follow the instructions on the app. You don’t need a separate app to create your account. NOTE If you have a Samsung account, use the account to log in. A registered Samsung smartphone user automatically logs in. To register your device to SmartThings 1. Make sure your smartphone is connected to a wireless network.
Operations SmartThings Category Monitoring Checkpoint Drying status You can check the current cycle and its options, and the remaining cycle time. Smart Control The Smart Control status is shown for the dryer. Self Check Use this to check if the dryer operates normally. Energy monitoring Use this to monitor the energy consumption status.
Category Checkpoint Laundry Recipe * Description You can select the fabric type, dry level, and wrinkle prevent to get recommended options and dry cycles that you can start right away. You can set the desired time for a dry cycle to finish. Laundry Planner * Q-Rator After you set the desired time, you will get a recommended cycle that will end within the time you set, and you can start or reserve the recommended cycle.
Operations Open Source Announcement The software included in this product contains open source software. You may obtain the complete corresponding source code for a period of three years after the last shipment of this product by sending an email to mailto:oss.request@samsung.com. It is also possible to obtain the complete corresponding source code in a physical medium such as a CD-ROM; a minimal charge will be required. The following URL http://opensource.samsung.
Maintenance WARNING • • • Do not clean the dryer by directly spraying water onto the dryer. Do not clean the dryer with benzene, thinner, alcohol, or acetone. This may cause discolouration, deformation, damage, electric shock, or fire. Before cleaning the dryer, be sure to unplug the power cord. Control panel Clean with a soft, damp cloth. Do not use abrasive cleaners. Do not spray cleaners directly on the panel. Immediately wipe up any spills or liquids from the control panel.
Maintenance 2. Open the outer filter and remove the inner filter (A). A 3. Unfold both the inner filter and the outer filter. 4. Remove the lint from both filters, and then clean the filters with the cleaning brush. NOTE To clean the filters thoroughly, clean the filters in running water, and then dry them completely. Maintenance 5. Put the inner filter into the outer filter, and then reinsert the lint filter into the original position. CAUTION • • • Clean the lint filter after each load.
Water tank To avoid leaks, empty the water tank after every load. 1. Using both hands, pull the water tank (A) forward to remove. A 2. Empty the water through the drain hole (B) and place the water tank back into place. NOTE B If you empty the water tank and press and hold Start/Pause (Hold to Start), the corresponding indicator turns off.
Maintenance Heat exchanger Clean the heat exchanger at least once a month. As a reminder, the heat exchanger indicator ( ) lights up on the display when the heat exchanger needs to be cleaned. 1. Gently press the top part of the outer cover (A) to open. A 2. Unlock the fixers (B). B Maintenance 3. Remove the inner cover (C).
4. Clean the heat exchanger with the provided cleaning brush or a vacuum cleaner with a brush attachment. Take care not to bend or damage the heat exchanger fins when cleaning. This may lead to a decrease in drying performance. CAUTION • • To avoid physical injury and burns, do not touch or clean the heat exchanger with bare hands. Do not use water to clean the heat exchanger. 5. Clean the inner cover with a smooth, damp cloth. 7. Close the outer cover.
Troubleshooting Checkpoints If you encounter an issue with the dryer, first check the table below and try the suggestions. Symptom Dryer does not run Dryer does not heat Action • • • • • Make sure the door is completely closed. Make sure the power cord is plugged in. Check the home’s circuit breaker and fuses. Empty the water tank. Clean the lint filter. • • Check the home’s circuit breaker and fuses. Select a heat setting other than COOL AIR (DV**N62**** models only).
Symptom Action • Make sure the lint filter is clean before every load. Dry lint-producing items (fuzzy towels) separate from lint trappers, such as black linen pants. Divide larger loads into smaller loads. Items still wrinkled after Wrinkle Prevent • • Small loads of 1-4 items work best. Load fewer items. Load similar type items. Odours remain in items after COOL AIR (DV**N62**** models only) • Make sure to thoroughly wash items with strong odours.
Troubleshooting Information codes If the dryer fails to operate, you may see an information code on the display. Check the table below and try the suggestions. Information code Meaning Action tC Air temperature sensor issue Clean the lint filter and/or heat exchanger. If this continues, call for service. tC5 Compressor temperature sensor issue Wait 2-3 minutes. Turn the power on and restart. dC Running the dryer with door open Close the door and restart.
Appendix Fabric care chart The following symbols provide garment care direction. The Clothing care labels include symbols for drying, bleaching, drying and ironing, or dry cleaning when necessary. The use of symbols ensures consistency among garment manufacturers of domestic and imported items. Follow care label directions to maximise garment life and reduce laundering problems.
Appendix Iron dry or steam temperatures Dry-clean High Dry-clean Medium Do Not dry-clean Low Line Dry / Hang to Dry Warning symbols for laundering Do Not Wash Drip Dry Dry Flat Do Not Wring Do Not Bleach Do Not Tumble Dry No Steam (added to iron) Do Not Iron Protecting the environment This appliance is manufactured from recyclable materials. If you decide to dispose of this appliance, please observe local waste disposal regulations.
Specification E D A C B TYPE FRONT LOADING DRYER DV9*N82**** MODEL NAME DIMENSIONS 600 mm 600 mm B 850 mm 850 mm C 600 mm 600 mm D 655 mm 640 mm E 1155 mm 1095 mm 54 kg 50 kg 550–600 W 550–600 W 5-35 °C 5-35 °C 220-240 V / 50 Hz Appendix ALLOWABLE TEMPERATURE DV8*N62**** A WEIGHT ELECTRICAL REQUIREMENTS DV9*N62**** English 55 Untitled-32 55 12/11/2018 6:47:31 PM
Appendix Consumption data Model DV9*N82**** DV9*N62**** Program COTTON (2) IRON DRY (2) SYNTHETICS COTTON (2) DV8*N62**** Load (kg) (1) Energy (kWh) Max. Duration (Minutes) 9 1.56 188 4.5 0.9 130 9 1.1 130 4.5 0.71 86 8 1.43 169 4 0.8 120 (2) 8 1.02 118 SYNTHETICS 4 0.
Memo Untitled-32 57 12/11/2018 6:47:31 PM
Memo Untitled-32 58 12/11/2018 6:47:31 PM
Memo Untitled-32 59 12/11/2018 6:47:31 PM
QUESTIONS OR COMMENTS? COUNTRY AUSTRALIA CALL 1300 362 603 (Other) 1300 425 299 (HHP) OR VISIT US ONLINE AT www.samsung.com/au/support 0800 726 786 (All Product) NEW ZEALAND 0800 6 726 786 (Support for Smart Mobile Devices) www.samsung.
