FP580_F1080_XAA_Cover 1/16/08 1:44 PM Page 3 DVD Player DVD-FP580 DVD-F1080 www.samsung.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 2 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 3 Precautions RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. Do not install this equipment in a confined space such as a bookcase or similar unit.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 4 CAUTION THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Note: • This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
F1080_FP580_XAA1(PV2) 12/21/07 1:35 PM Page 5 Before you start Accessories Remote Control (AK59-00083B) Battery Remote Control (CR2025) User’s Manual (AK68-01464S) (AD43-00030A) Install Batteries in the Remote control 1 Open the battery cover on the bottom side of the remote control. 2 Insert the battery (CR2025). Make sure that the polarities (+ and -) are aligned correctly. 3 Replace the battery cover. If the remote control doesn’t operate properly: - Check the polarity + - of the battery.
F1080_FP580_XAA1(PV2) 11/12/07 TA B L E OF 1:13 PM Page 6 CONTENTS Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Chapter 1: Setup General Features . . . . . . . . . .
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 7 Chapter 1 Setup SETUP General Features Excellent Sound Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction. Screen Both regular and widescreen(16:9) pictures can be viewed. Slow Motion An important scene can be viewed in slow motion. 1080p Playback (DVD-F1080 only) This player upconverts regular DVDs for playback on 1080p TVs.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 8 SETUP Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types DVD Audio + Video AUDIO-CD Disc Size Max. Playing Time 5” Single-sided 240 min. Double-sided 480 min. 3 1/2” Single-sided 80 min. Double-sided 160 min. 5” 74 min. 3 1/2” 20 min.
F1080_FP580_XAA1(PV2) 11/16/07 4:52 PM Page 9 SETUP Setup Description Front Panel Controls 1. 2. 3. 4. STANDBY/ON ( ) When STANDBY/ON is pressed on, the indicator goes out and the player is turned on. STANDBY Indicator When the unit is first plugged in, the indicator lights. DISC TRAY Place the disc here. OPEN/CLOSE ( ) Press to open and close the disc tray. 5. 6. 7. 8. SKIP ( ) / SEARCH Use to reverse skip a scene or music. STOP ( ) Stops disc play. PLAY/PAUSE ( ) Begin or pause disc play.
F1080_FP580_XAA1(PV2) 11/16/07 4:52 PM Page 10 SETUP Rear Panel (DVD-F1080) 1. 2. 3. DIGITAL AUDIO OUT JACKS - Use a coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder. COMPONENT VIDEO OUT JACKS - Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video. - If P-SCAN is set to “ON” in Video Output of the Setup Menu, progressive scan mode will work.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 11 SETUP Setup Tour of the Remote Control 1. STANDBY/ON Turns the power on or standby. 12 13 2. NUMBER Buttons 3. DISC MENU (NUMBER 4) Button 3 14 4. 4 15 16 17 5. 1 2 5 6 7 8 9 10 11 Brings up the Disc menu. 18 ZOOM (NUMBER 7) Button Enlarges the DVD Picture. INFO Button Displays the current disc mode. 6. SEARCH Buttons ( / ) Allow you to search forward/backward through a disc. 19 7. STOP Button ( ) 8.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 12 Chapter 2 CONNECTIONS Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.
F1080_FP580_XAA1(PV2) 11/22/07 8:17 AM Page 13 CONNECTIONS HDMI VIDEO Specifications • HDMI (High Definition Multimedia Interface) HDMI enables you to make a digital video and audio connection with a single cable. Using HDMI, the DVD player transmits a digital video and audio signal which displays a vivid picture on a TV having an HDMI input jack. • HDMI connection description HDMI connector - Video and audio are transferred digitally without compression (LPCM or Bit Stream data).
F1080_FP580_XAA1(PV2) 11/16/07 4:52 PM Page 14 CONNECTIONS Connecting to a TV (Progressive) - Connecting to your TV using Component video cables. The 480p resolution is possible with this connection. - What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method and provides better and clearer picture quality.
F1080_FP580_XAA1(PV2) 11/16/07 4:52 PM Page 15 CONNECTIONS Connecting to a TV (Interlace) 1 Using Component video cables (not included), connect the COMPONENT VIDEO OUT jacks on the rear of the DVD player to the COMPONENT IN jacks of your TV. 2 RED Using the audio cables, connect the AUDIO (red and white) OUT jackls on the rear of the DVD player to the AUDIO (red and white) IN jacks of your TV. Turn on your DVD player and TV. 3 RED Set the Video Output to I-SCAN in the Display Setup menu.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 16 CONNECTIONS Connecting to a TV (Video) 1 Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT jacks on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV. 2 Turn on your DVD player and TV.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 17 CONNECTIONS Connecting to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the DVD player to the AUDIO (red and white) IN jacks of the Amplifier. Connections 2 Using the video signal cable(s), connect the VIDEO, COMPONENT or HDMI OUT jacks on the rear of the DVD player to the VIDEO, COMPONENT or HDMI-DVI IN jack of your TV as described on pages 12 to 16.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 18 CONNECTIONS Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) 1 If using a Coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) jack on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, COMPONENT or HDMI OUT jacks on the rear of the DVD player to the VIDEO, COMPONENT or HDMI-DVI IN jacks of your TV as described on pages 12 to 16.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 19 Chapter 3 BASIC FUNCTIONS Playing a Disc Before Play - Turn on your TV and set it to the Video Input your DVD player is connected to with your TV’s remote control. - If you connected the DVD player to an external Audio System, turn on your Audio System and set it to the correct Audio Input. Playback 1 Press the OPEN/CLOSE ( ) button. The STANDBY indicator light goes out and the tray opens.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 20 BASIC FUNCTIONS 4 Stopping Play Press the STOP ( ) button during play. Note - If the player is left in the stop mode for more than one minute without pressing any buttons, a screen saver will be activated. Press the PLAY/PAUSE ( ) button to resume normal play. - If the player is left in the stop mode for more than 30 minutes, the power will automatically turn off. 5 Removing the Disc Press the OPEN/CLOSE ( ) button. Screen stops, no sound.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 21 BASIC FUNCTIONS Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track ▼ During play, press the SEARCH ( or ) button on the remote control for more than 1 second. If you want to search at a faster speed on the DVD or CD, press and hold the button.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 22 BASIC FUNCTIONS Using the Display Function When Playing a DVD/MPEG4 ▼ You can select Info in the function menu by pressing the MENU button. 1 During play, press the INFO button on the remote control. 2 Press the / buttons to select the desired item. DVD DVD Title 001 Chapter 002 Time Audio Subtitle 0 0 :0 0 :1 3 ENG 5.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 23 BASIC FUNCTIONS Note Title Chapter To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified. Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to tracks on an audio CD). Allows playback of the film from a desired time. You must enter the starting time as a reference.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 24 BASIC FUNCTIONS Using the Title Menu 1 During the playback of a DVD disc, press the MENU button on the remote control. 2 Press the / buttons to select Title Menu, then press the or ENTER button. Press ENTER key for Title Menu Enter Return Menu Note - Depending on a disc, the Title Menu may not work. - Title Menu will only be displayed if there are at least two titles in the disc.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 25 BASIC FUNCTIONS Repeat Play Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc. When playing a DVD 1 Press the REPEAT button on the remote control. Repeat screen appears. DVD Off 01 01 A - B T ENTER REPEAT T Using the A-B Repeat function 1. Press the REPEAT button on the remote control. 2. Press the ¦/ button to select A-B button in the on screen display. 3.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 26 BASIC FUNCTIONS Slow Play This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments being played etc., so you can study them more closely. When playing a DVD 1 During play, press the PLAY/PAUSE ( ) button. 2 Press the SEARCH ( / ) button to choose the play speed between 1/8, 1/4 and 1/2 of normal speed during PAUSE mode.
F1080_FP580_XAA1(PV2) 11/22/07 8:17 AM Page 27 Chapter 4 A D VA N C E D F U N C T I O N S Adjusting the Aspect Ratio (EZ View) The Aspect ratio is the relation between the width and height of a picture. The two most common are 4:3 (Standard) and 16:9 (Widescreen). Follow the instructions below for the best aspect ratio setting for your TV.
F1080_FP580_XAA2(PV2) 11/12/07 2:11 PM Page 28 A D VA N C E D F U N C T I O N S - 16:9 Wide Note This function may behave differently depending on the type of disc. If you are using a 16:9 TV For 16:9 aspect ratio discs For 4:3 aspect ratio discs - WIDE SCREEN Displays the content of the DVD title in 16:9 aspect ratio. - Normal Wide Displays the content of the DVD title in 16:9 aspect ratio. The picture will look horizontally stretched.
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 29 A D VA N C E D F U N C T I O N S Selecting the Audio Language You can select a desired audio language available on a disc quickly and easily with the AUDIO button. Using the AUDIO button (DVD/MPEG4) 1 Press the AUDIO button. The Audio changes when the button is pressed repeatedly. - The audio languages are represented by abbreviations. DVD ENG DOLBY DIGITAL 5.
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 30 A D VA N C E D F U N C T I O N S Selecting the Subtitle Language You can select a desired subtitle quickly and easily with the SUBTITLE button. Using the SUBTITLE button (DVD/MPEG4) 1 Press the SUBTITLE button. The subtitle changes when the button is pressed repeatedly. The subtitle languages are represented by abbreviations. DVD Off SUBTITLE MPEG4 An External subtitle option will appear, depending on the DivX Disc.
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 31 A D VA N C E D F U N C T I O N S Changing the Camera Angle When a DVD contains multiple angles of a particular scene, you can use the ANGLE function. Using the ANGLE function (DVD) If the disc contains multiple angles, the ANGLE mark appears on the screen. 1 During play, press the MENU button on the remote control. 2 buttons to Press the / select Function , then press the or ENTER button.
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 32 A D VA N C E D F U N C T I O N S Using the Bookmark Function This feature lets you bookmark sections of a DVD, so you can quickly find them at a later time. Using the Bookmark Function (DVD) 1 During play, press the MENU button on the remote control. 2 buttons to Press the / select Function, then press the or ENTER button.
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 33 A D VA N C E D F U N C T I O N S Recalling a Marked Scene 1~3 The first 1~3 steps are the same as those for “Using the Bookmark Function” on page 32. 4 CANCEL Press the ¦/ buttons to select a marked scene. 5 Press the PLAY/PAUSE ( ) button to skip to the marked scene. Advanced Functions Clearing a Bookmark 1~3 The first 1~3 steps are the same as those for “Using the Bookmark Function” on page 32.
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 34 A D VA N C E D F U N C T I O N S Using the Zoom Function Using the Zoom Function (DVD) 1 During play, press the MENU button on the remote control. 2 buttons to Press the / select Function, then press the or ENTER button. Info Zoom Bookmark Repeat EZ View Angle Enter 3 buttons to Press the / select Zoom, then press the or ENTER button.
F1080_FP580_XAA2(PV2) 1/16/08 3:35 PM Page 35 A D VA N C E D F U N C T I O N S Clips Menu for MP3/WMA/JPEG/MPEG4/CD Audio CD Audio or discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that will be organized into folders on this unit as shown below. They are similar to how you use your computer to put files into different folders. Open the disc tray. Place the disc on the tray. Close the tray. The tray closes and this screen displays.
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 36 A D VA N C E D F U N C T I O N S MP3/WMA/CD Audio Playback 1 Stop Off 00:00:00 Open the disc tray. Place the disc on the tray. Close the tray. Enter Menu Return 2 buttons to Press the / select a song file. Press ENTER to begin playback of the song file. Play Off B e c a u s e Yo u T 00:00:23 ...
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 37 A D VA N C E D F U N C T I O N S CD-R MP3/WMA file When you record MP3 or WMA files on a CD-R for playback in this unit, please refer to the following. - Your MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac. This format is the most widely used. - When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, .
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 38 A D VA N C E D F U N C T I O N S MPEG4 Playback MPEG4 Play Function MPEG4 is a compressed video format designed to deliver DVD quality video at lower data rates and smaller file sizes. Types of MPEG4 files are DivX or Xdiv. These files have an .avi extension. AVI files are used to contain the audio and video data. Only AVI format files with the “.avi” extensions can be played. 1 Off Stop 00:00:00 Open the disc tray. Place the disc on the tray.
F1080_FP580_XAA2(PV2) 1/16/08 2:11 PM Page 39 A D VA N C E D F U N C T I O N S Possible warning messages that may appear when trying to play DivX/AVI files are : 1. No Authorization - File with bad registration code. MPEG4 Function Description Function Description Reference page During play, press the or Skip button, it moves forward ( or ) or backward 5 minutes. During play, press the SEARCH ( or ) button and press Search again to search at a faster ( or ) speed.
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 40 A D VA N C E D F U N C T I O N S Picture CD Playback Off Stop 1 00:00:00 Select the desired folder. (See page 35) Enter 2 Stop buttons to Press the / select a Picture file in the clips menu and then press the ENTER button. Menu Return Off 00:00:00 1 ... Enter Menu Return 3 Note - Press the STOP button to return to the clips menu. ENTER RETURN Press the INFO button to display the menu.
F1080_FP580_XAA2(PV2) 11/16/07 5:05 PM Page 41 A D VA N C E D F U N C T I O N S MP3-JPEG Playback You can play a JPEG photo file using music as a background. 1 Press the / buttons to select an MP3 file in the clips menu and then press the ENTER button. ▼ 2 Music will play from the beginning. Press the / buttons to select a JPEG file in the clips menu and then press the ENTER button. Note MP3 and JPEG files have to be on the same 3 Press the STOP button when you want to stop the playback.
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 42 Chapter 5 N AV I G AT I N G THE SETUP MENU Using the Setup Menu The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up parental levels, and even adjust the player to the type of television screen you have. 1 With the unit in Stop mode, press the MENU button on the remote control. buttons to Press the / select Setup, then press the or ENTER button.
F1080_FP580_XAA2(PV2) 11/12/07 N AV I G AT I N G 1:12 PM Page 43 THE SETUP MENU Setting Up the Language Features If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie. Using the Player Menu Language 1 With the unit in Stop mode, press the MENU button. 2 buttons to Press the / select Setup, then press the or ENTER button.
F1080_FP580_XAA2(PV2) 11/12/07 N AV I G AT I N G 1:12 PM Page 44 THE SETUP MENU Using the Disc Menu Language This function changes the text language only on the disc menu screens. 1 With the unit in Stop mode, press the MENU button. 2 buttons to Press the / select Setup, then press the or ENTER button. Language Setup Audio Setup Display Setup Parental Setup : DivX(R)Registration : Enter 3 buttons to Press the / select Language Setup, then press the or ENTER button.
F1080_FP580_XAA2(PV2) 11/12/07 N AV I G AT I N G 1:12 PM Page 45 THE SETUP MENU Using the Audio Language 1 With the unit in Stop mode, press the MENU button. 2 buttons to Press the / select Setup, then press the or ENTER button. Language Setup Audio Setup Display Setup Parental Setup : DivX(R)Registration : Enter 3 buttons to Press the / select Language Setup, then press the or ENTER button.
F1080_FP580_XAA2(PV2) 11/12/07 N AV I G AT I N G 1:12 PM Page 46 THE SETUP MENU Using the Subtitle Language 1 With the unit in Stop mode, press the MENU button. 2 buttons to Press the / select Setup, then press the or ENTER button. Language Setup Audio Setup Display Setup Parental Setup : DivX(R)Registration : Enter 3 buttons to Press the / select Language Setup, then press the or ENTER button.
F1080_FP580_XAA2(PV2) 11/12/07 N AV I G AT I N G 1:12 PM Page 47 THE SETUP MENU Using the DivX Subtitle Language 1 With the unit in Stop mode, press the MENU button. 2 buttons to Press the / select Setup, then press the or ENTER button. Language Setup Audio Setup Display Setup Parental Setup : DivX(R)Registration : Enter 3 buttons to Press the / select Language Setup, then press the or ENTER button.
F1080_FP580_XAA2(PV2) 1/16/08 N AV I G AT I N G 2:15 PM Page 48 THE SETUP MENU Setting Up the Audio Options Audio Options allow you to setup the audio device and sound status settings depending on the audio system in use. 1 With the unit in Stop mode, press the MENU button. 2 buttons to Press the / select Setup, then press the or ENTER button.
F1080_FP580_XAA2(PV2) 1/16/08 N AV I G AT I N G 2:21 PM Page 49 THE SETUP MENU The following describes each option found in the Audio Setup Menu. ❶ Digital Out - PCM : Converts to PCM(2CH) audio. - Bitstream : Outputs Dolby Digital via digital output. Select Bitstream when connecting to a Dolby Digital Decoder. ❷ MPEG-2 Digital Out - PCM : Converts to PCM (2CH) audio. - Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 8 CH). Select Bitstream when using the Digital Audio Output.
F1080_FP580_XAA2(PV2) 1/16/08 N AV I G AT I N G 2:23 PM Page 50 THE SETUP MENU Setting Up the Display Options Display options enable you to set various video functions of the player. 1 With the unit in Stop mode, press the MENU button. 2 buttons to Press the / select Setup, then press the or ENTER button.
F1080_FP580_XAA2(PV2) 1/16/08 N AV I G AT I N G 2:26 PM Page 51 THE SETUP MENU The following describes each option found in the Display Setup Menu. ❶ TV Aspect Depending on a type of television you have, you may want to adjust the screen setting (aspect ratio). - 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.
F1080_FP580_XAA2(PV2) 11/12/07 N AV I G AT I N G 1:12 PM Page 52 THE SETUP MENU ❻ Picture Quality - Black Level (DVD-FP580 and DVD-F1080 : Adjusts the brightness of the screen.(On or Off) It does not function in Progressive mode.
F1080_FP580_XAA2(PV2) 1/16/08 N AV I G AT I N G 3:37 PM Page 53 THE SETUP MENU Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. Setting Up the Rating Level 1 With the unit in Stop mode, press the MENU button. 2 buttons to Press the / select Setup, then press the or ENTER button.
F1080_FP580_XAA2(PV2) 11/12/07 N AV I G AT I N G 1:12 PM Page 54 THE SETUP MENU Changing the Password 1 With the unit in Stop mode, press the MENU button. 2 buttons to Press the / select Setup, then press the or ENTER button. Language Setup Audio Setup Display Setup Parental Setup : DivX(R)Registration : Enter 3 buttons to Press the / select Parental Setup, then press the or ENTER button.
F1080_FP580_XAA2(PV2) 11/12/07 N AV I G AT I N G 1:12 PM Page 55 THE SETUP MENU Setting Up the Anynet+(HDMI-CEC) (DVD-F1080 only) Anynet+ is a function that can be used to operate this DVD Player using a Samsung TV remote control. This is done by connecting the DVD player to a SAMSUNG TV using an HDMI Cable. (see pages 12-13) This is only available with SAMSUNG TVs that support Anynet+. To operate Anynet+, you must turn Anynet+(HDMI-CEC) On in the Setup Menu.
F1080_FP580_XAA2(PV2) 11/12/07 N AV I G AT I N G 1:12 PM Page 56 THE SETUP MENU You can operate the DVD Player by using the TV remote control. These are buttons that can be used to operate the DVD Player: , , , , , , and buttons, buttons. - Select Device : Use this option to select device which you want to connect to your TV. - Menu on Device : Same as MENU button on the DVD Player remote control. - Device Operation : Same as INFO button on the DVD Player remote control.
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 57 Chapter 6 REFERENCE 2. Press the ¦/ buttons to select Total, then press the ENTER button. Firmware upgrade Introduction Upgrading the Firmware will keep your DVD player up to date. The latest firmware version for this unit is provided on the Samsung Website.(www.samsung.com). Firmware upgrade starts How to make an upgrade disc You must burn the latest firmware version onto a blank CD-R or CD-RW disc: 1.
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 58 REFERENCE Troubleshooting Before requesting service, please check the following. Action Problem No operations can be performed with the remote control. • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 20 feet. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it.
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 59 REFERENCE Problem No HDMI output. (DVD-F1080 only) Abnormal HDMI output screen. (DVD-F1080 only) HDMI output Jitter. (DVD-F1080 only) Action Page • Check the if the Video output is set to HDMI. • Check the connection between the TV and the HDMI jack of DVD player. • See if the TV supports this 480p/720p/1080i/1080p DVD player.
F1080_FP580_XAA2(PV2) 11/22/07 8:24 AM Page 60 REFERENCE Specifications General Power Requirements AC 120V ~ 60 Hz Power Consumption 7W Weight Dimensions Operating Temperature Range Operating Humidity Range DVD (DIGITAL VERSATILE DISC) Disc +41°F to +95°F 10 % to 75 % Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min. CD : 3 1/2” (COMPACT DISC) Reading Speed : 4.8 ~ 5.6 m/sec.
F1080_FP580_XAA2(PV2) Region 11/12/07 1:12 PM Country Page 61 Customer Care Center ENG-61 Web Site
F1080_FP580_XAA2(PV2) 11/12/07 1:12 PM Page 62 Warranty LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
FP580_F1080_XAA_Cover 11/6/07 5:58 PM Page 2 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. ☎1-800-SAMSUNG (7267864)/www.samsung.com Samsung Electronics America,Inc. 105 Challenger Road Ridgefield Park,NJ 07660-0511 1-800-SAMSUNG (7267864) www.samsung.
