User Manual (ver.2.0)
Table Of Contents
- Important Safety Instructions
- Precautions
- Before you start
- Chapter 1 : SETUP
- Chapter 2 : CONNECTIONS
- Choosing a Connection
- Connecting to a TV with an HDMI Jack (DVD-F1080 only)
- Connecting to a TV with a DVI Jack (DVD-F1080 only)
- Connecting to a TV (Progressive)
- Connecting to a TV (Interlace)
- Connecting to a TV (Video)
- Connecting to an Audio System (2 Channel Amplifier)
- Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
- Choosing a Connection
- Chapter 3 : BASIC FUNCTIONS
- Chapter 4 : ADVANCED FUNCTIONS
- Chapter 5 : NAVIGATING THE SETUP MENU
- Chapter 6 : REFERENCE
ENG-24
Using the Title Menu
1
During the playback of a
DVD disc, press the MENU
button on the remote
control.
2
Press the / buttons to
select Title Menu, then
press the or ENTER
button.
Note
- Depending on a disc, the Title Menu may not
work.
- Title Menu will only be displayed if there are at
least two titles in the disc.
MenuReturnEnter
Press ENTER key
for Title Menu
BASIC FUNCTIONS
Using the Function Menu
Using the Function Menu (DVD)
1
Press the MENU button
during playback.
2
Press the / buttons to
select Function, then press
the or ENTER button.
- Info (See pages 22 to 23)
- Zoom (See page 34)
- Bookmark
(See pages 32 to 33)
- Repeat (See pages 25)
- EZ View
(See pages 27 to 28)
- Angle (See pages 31)
▼
You can also directly select these functions
using their respective buttons on the remote
control.
- INFO - ZOOM
- EZ VIEW - REPEAT
3
Press the / buttons to
select one of the six
functions. Then press the
or ENTER button to
access the function.
MenuReturnEnter
Info
Zoom
Bookmark
Repeat
EZ View
Angle
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 24