User Manual (ver.2.0)
Table Of Contents
- Important Safety Instructions
- Precautions
- Before you start
- Chapter 1 : SETUP
- Chapter 2 : CONNECTIONS
- Choosing a Connection
- Connecting to a TV with an HDMI Jack (DVD-F1080 only)
- Connecting to a TV with a DVI Jack (DVD-F1080 only)
- Connecting to a TV (Progressive)
- Connecting to a TV (Interlace)
- Connecting to a TV (Video)
- Connecting to an Audio System (2 Channel Amplifier)
- Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
- Choosing a Connection
- Chapter 3 : BASIC FUNCTIONS
- Chapter 4 : ADVANCED FUNCTIONS
- Chapter 5 : NAVIGATING THE SETUP MENU
- Chapter 6 : REFERENCE
ENG-4
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player.
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long
periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
• The Main plug is used as a disconnect device and shall stay readily operable at any time.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
F1080_FP580_XAA1(PV2) 11/12/07 1:13 PM Page 4