User Manual (ver.2.0)
Table Of Contents
- Important Safety Instructions
- Precautions
- Before you start
- Chapter 1 : SETUP
- Chapter 2 : CONNECTIONS
- Choosing a Connection
- Connecting to a TV with an HDMI Jack (DVD-F1080 only)
- Connecting to a TV with a DVI Jack (DVD-F1080 only)
- Connecting to a TV (Progressive)
- Connecting to a TV (Interlace)
- Connecting to a TV (Video)
- Connecting to an Audio System (2 Channel Amplifier)
- Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
- Choosing a Connection
- Chapter 3 : BASIC FUNCTIONS
- Chapter 4 : ADVANCED FUNCTIONS
- Chapter 5 : NAVIGATING THE SETUP MENU
- Chapter 6 : REFERENCE
Install Batteries in the Remote control
1
Open the battery
cover on the bottom
side of the remote
control.
2
Insert the battery
(CR2025).
Make sure that the
polarities (+ and -) are
aligned correctly.
3
Replace the battery
cover.
If the remote control doesn’t operate properly:
- Check the polarity + - of the battery.
- Check if the battery is drained.
- Check if the remote control sensor is blocked by obstacles.
- Check if there is any fluorescent lighting nearby.
Before you start
Accessories
ENG-5
Remote Control
(AK59-00083B)
Battery
Remote Control
(CR2025)
(AD43-00030A)
User’s Manual
(AK68-01464S)
Video/Audio
Cable
(AC39-42001R)
POWER AC-IN
Cable
(AD39-00076A)
F1080_FP580_XAA1(PV2) 12/21/07 1:35 PM Page 5