Manual

Controlling a TV with the Remote
The remote can also be set up to control most TVs. To program the remote, use the
code that corresponds to your brand.
TV Codes
Code Brand Code Brand
01 SAMSUNG 1 16 SHARP 1
02 SHARP 2 17 ZENITH
03 SONY 18 LG3
04 MAGNAVOX 19 DAEWOO8
05 SANYO 1 20 SANYO2
06 LG2 21 EMERSON
07 RCA 22 SHARP 3
08 LG1 23 SAMSUNG4
09 TOSHIBA 24 PANASONIC2
10 HITACHI 25 NOBLE_
11 JVC 26 TELEFUNKEN
12 PANASONIC1 27 NEqNSAN
13 MITSUBISHL2 28 LOEWE
14 SAMSUNG2 29 RCA2
15 SAMSUNG3
Turn on the TV
PointtheDVD'sremoteattheT_.
While holding the TV POWER button
down, enter the code for your brand.
If the TV turns off, setup is complete.
Enter other codes of the same brand if
the first code does not work.
To operate the TV, usethe "TV Function
Buttons" described on page 13.
e.g) For Samsung 1 TVs
While holding down the TV POWER button,
enter 0 and then 1.
The remote may not be able to control
every model TV of the brands listed.
Troubleshooting
Before requestingservice (troubleshooting),please checkthefollowing.
Problem Action Page
NO operations can be • Check the batteries in the remote May need replacing
performed with remote • Operate the remote control at a distance of no more than 20 feet
• Remove batteries and hold down one or more buttons for several P5
minutes to drain the microprocessor insidethe remote to reset it
RethstaJ$batteries and try remote again
Disc does not play • Ensure that the disc is installedwith the Sabe$side facing up
• Check the region number of the DVD P8
51 channel sound isnot • 5t channel sound is reproduced only when the foitowing conditions
being reproduced are met :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5 1 channel sound
• Check whether the disc being playedhas the Dothy 5 1 ch" mark Pt 4
on the outside
• Check ifyour aedb system is connected and working propefl_z P42
• In a SETUP Menu, is the Audb Output set to Bitstream?
The _ iconappears on • The features or action cannot be completed at this time because:
screen 1 The DVD's software restricts it
2 The END'Ssoftwaredoesn't supportthe feature (eg, angles) P20
3 The feature is not available at the moment
4 You've requested a title or chapter number or search time that is
out of range
Disc Menu doesn't appear • Check ifthe disc has a Menu P23
Play mode dtf_rs from the • Some of the functions selected inthe Setup Menu may not work
Setup Menu setectton properly if the disc is not encoded with the corresponding function P37~45
The screen ratio cannot
he changed • The Screen Ratio is fixed on your DVSe P43
No audio • Make sure you have setested the correct Digital Output in the P42
Audio Options Menu
Forgot password • Press poweron from a cold start wi_ no disc inthe unit Pressthe
STOP ( • ) and PLAY( _1 ) buttons simuitaleousty on the front benet
for three seconds The Select Menu Languagedisptay willappear P44~45
Select the desired language button Press the MENU button on the
remote control to select the P_en_ Mode The Paren_ Mode is now
unlecked as indicatedon the display Pressthe DOWN button to select
Paren_ Press ENTER and the Create Passworddlepley willappear
You can now set your taring leveland change your passwordto a new
number
if you experience other • Go to the contents and find the section of the instructionbook that
problems contains the explanations regarding the current problem, and foltew
the procedure once again
• if the problem still cannot be solved, p_easecontact your nearest
samsung authorized service center
46 47