Instruction Manual DVD-R100
ENG AK68-00427Q-00
Getting Started Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT NOTE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug. If it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable.
● ● Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
Getting Started ● ● ● ● Do not apply labels or stickers to discs. (Do not use discs fixed with exposed tape adhesive or leftover peeled-off stickers.) Do not use scratch-proof protectors or covers. Do not use discs printed with label printers available on the market. Do not load warped or cracked discs. JPEG CD-R/RW ● ● ● Disc Storage Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment. ● Do not keep under direct sunlight.
DVD-RW (VR mode) - This is a format that is used for recording data on a DVD-RAM or DVD-RW disc. You can repeat recording, editing, deleting, partial deletion, creation of playlist, and etc. - A disc that is recorded in this mode may not be played by existing DVD players. ● DVD-RW (Video mode) - This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by existing DVD players once it has been finalised.
Getting Started Contents Step 4 : Connecting the Audio cable....................19 Method 1 : Connecting to your TV ..................................19 Method 2 : Connecting to a stereo amplifier (analog audio out / digital audio out) ............................................19 Getting Star ted Method 3: Connecting to an AV amplifier with a digital input jack ................................................................20 Warning...................................................................
Recording Using Last Mark ...............................................................54 Before Recording.....................................................34 Recordable discs..............................................................34 Recording Formats ..........................................................35 Using Markers ..................................................................56 Playing an Audio CD/MP3 .....................................57 Playing an Audio CD (CD-DA)/MP3 .....
Getting Started General Features The DVD-R100 allows you to record and play high quality digital images on DVD-RAM/DVD-RW/DVD-R discs. You can record and edit digital images on DVDRAM/DVD-RW/DVD-R discs as if they were VCR tapes. High quality digital audio and video recording and playback Record up to 12-hours of images with a double sided 9.4 GB DVD-RAM disc, and up to 6-hours of images with a 4.7 GB DVD-RAM/DVD-RW/DVD-R disc, depending on the recording mode.
Make sure to check the following matters before reading the user’s manual. Icons that will be used in manual Icon Term Definition DVD This involves a function available in DVD or DVD-R/DVD-RW discs that have been recorded and finalised in Video Mode. RAM This involves a function available in DVD-RAM. RW This involves a function available in DVD-RW. R This involves a function available in DVD-R. CD This involves a function available in a data CD (CD-R or CD-RW).
Getting Started Step 3 Recording There are two different recording methods, Direct Recording and Timer Recording. Timer recording is classified as recording type : Once, Daily or Weekly or recording mode : XP (high quality mode), SP (standard quality mode), LP (long recording mode), and EP (extended mode) according to the recording mode. When recording is set in the FR mode, the best quality picture is recorded with regards to the remaining time on the disc.
Getting Started Description Front Panel 1 2 3 4 6 5 17 16 15 14 18 11 13 12 1. STANDBY/ON Turns the recorder on and off. 2. DV-IN Connects external digital equipment with a DV jack. 3. LINE 2 IN Connects external equipment. 4. DISC TRAY Opens to accept a disc. 5. DISPLAY Displays the playing status, title/ chapter/ time, etc. 6. OPEN/CLOSE Opens and closes the disc tray. 7. STOP Stops disc playback. 8. PLAY/PAUSE Plays a disc or pauses playback. 9.
Getting Started Rear Panel Fan The fan always revolves when the power is on. Ensure a minimum of 10cm clear space on all sides of the fan when installing the product. 1. DIGITAL AUDIO OUT Connects to an amplifier having a digital input jack. 2. ANALOG AUDIO OUT Connects to the audio input of external equipment using audio cables. 3. VIDEO OUT Connects the input of external equipment using a Video or S-Video cable. 12- English 4.
Tour of the Remote Control 10. MENU Button Brings up the DVD Recorder’s setup menu. 12. RETURN Button Returns to a previous menu. 13. REPEAT Button Allows you to repeat a title, chapter, track or disc. 14. INFO. Button This will display current settings or disc status. 15. REC MODE Button This will display the recording status. 16. REC Button Use to make a recording on DVD-RAM/-RW/-R discs. 17. MARKER Button Use this to bookmark a position while playing a disc. 18. TV STANDBY/ON Button 19.
Connecting & Setting UP Quick Overview Connecting & Setting Up A Quick Overview presented in this guide will give you enough imformation to start using the recorder. Step 1 : Unpacking This section involves various methods of connecting the DVD player to other external components and required initial setting modes. † Step 2 : Connecting the Antenna cable † Step 3 : Connecting the Video cable † Step 4 : Connecting the Audio cable † Step 5 : Connecting the external devices Quick Overview...............
Step 2: Connecting the Antenna Cable Step 1: Unpacking Accessory ● ● Video/Audio Cable Remote Control RF Cable for TV Batteries for Remote Control (AAA Size) Method 1 : Antenna + DVD Recorder + TV Method 2 : Antenna +Set-Top Box or VCR + DVD Recorder + TV ■ If you are using an off-air antenna that has 300-ohm twin flat leads, use an external antenna connector (300-75 ohm adaptor : not supplied) to connect the antenna to the DVD Recorder.
Connecting & Setting UP Method 1 : Antenna + DVD Recorder + TV Method 2 : Antenna + Set-Top Box or VCR + DVD Recorder + TV 1. Connect the signal source to the DVD Recorder Use a TV antenna or coaxial cable to connect the signal source coming from the antenna or wall to the VHF/UHF RF-IN jack on the DVD Recorder. 1. Connect the signal source to the STB or VCR Use a TV antenna or coaxial cable to connect the signal source coming from the antenna or wall to the VHF/UHF RF-IN jack on the STB or VCR. 2.
Step3 : Connecting the Video output cable ● ● ● Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on DVD Recorder and VIDEO(yellow) IN jack on the TV (or AV amplifier). ● You will enjoy regular quality images. ● Connect audio cables( white and red) between the ANALOG AUDIO OUT jacks on the DVD Recorder and AUDIO IN jacks on TV( or AV amplifier).
Connecting & Setting UP Method 2 : Connecting to an S-video output jack Connect an S-video cable(not supplied) between the S-VIDEO OUT jack on DVD Recorder and S-VIDEO IN jack on the TV (or AV amplifier). ● You will enjoy high quality images. S-Video separates the picture element into black and white (Y) and color (C) signals to present clearer images than regular video input mode.
Step 4 : Connecting the Audio output cable Method 2 : Connecting to a stereo amplifier with analog audio output jacks If your stereo amplifier only has audio input jacks(L and R), use the analog audio out jacks. ● ● ● Connecting & Setting UP There are several ways to connect your DVD Recorder. Select the audio connection that best suits you below.
Method 3: Connecting to an AV amplifier with a digital audio output jack Connecting & Setting UP If your AV amplifier only has a Dolby Digital or DTS decoder and a digital input jack, use this connection. To enjoy Dolby Digital or DTS sound, you will set up the audio settings. (See page 31) Step 5 : Connecting to LINE1, LINE2, DV input jack to Input jack This allows you to connect your DVD Recorder to other external devices and view or record their outputs.
Step 6 : Preparing the Remote Control You can also use the LINE2 IN jacks on the front panel of the DVD Recorder. You can record from connected equipment. When an input source is inserted into LINE2 while viewing TV, the input will be switched to LINE2 automatically. Install Batteries in the Remote Control ● ● ● Open the battery cover on the back of the remote. Insert two AAA batteries. Make sure that the polarities (+ and -) are aligned correctly. Replace the battery cover.
To determine whether your television is compatible, follow the instructions below. 1. Switch your television on. 2. Point the remote control towards the television. 3. Hold down the TV STANDBY/ON button and enter the two-figure code corresponding to the brand of your television, by pressing the appropriate numeric buttons.
System Setup On-Screen Menu Navigation The on-screen menus allow you to enable or disable various functions on your DVD Recorder. Use the following buttons to open and navigate through the on-screen menus. No Disc Setup System √ Language √ Audio √ Video √ Parental Control √ MOVE OK RETURN EXIT Press this button on the remote control while the DVD Recoder is in Stop or Play mode to open the on-screen MAIN MENU. And you can exit the on-screen MENU all together.
Plug & Auto Set up Channel Scan is completed. 6 Auto In 3~4 seconds, you will see Clock Setting Menu. If you want to start Clock Setting immediately, Press OK button. Your DVD Recorder will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes. Your DVD Recorder will then be ready for use. Auto channel scan completed successfully. OK the RF cable as indicated on 1 Connect page 15~16.
navigation †…œ √ buttons to input Time, Date,Year. Use number button to 5 Use input clock data directly. Clock Set DVD-RAM(VR) Clock Set Time 12 : 00 This menu is used to set the current time. You need to set the time to use timer recording. the unit in Stop mode, press the 1 With MENU button. Using the †… buttons, move the 2 selection bar to “Setup” then press OK button to select. DVD-RAM(VR) OK 01 Year JAN 2004 RETURN THU EXIT OK button, then the date and time 6 Press will be saved.
OK button to continue. 6 Press If you want to exit, press MENU button. Auto Setup DVD-RAM(VR) Install Auto Setup √ Manual Setup √ Your data will be lost. This feature allows you to manually set the DVD Recorder tuner band to Antenna or Cable, whichever you connected to the Antenna In jack during initial setup. 1 With the unit in Stop mode, press the MENU button on the remote. Press [OK] to continue, [MENU] to exit. OK MOVE OK RETURN scan will be started.
the †… buttons to select a PR (program) you wish to edit, delete, or 6 Press swap. And then press OK button. Manual Setup You can add preset channel that Auto Channel Search missed. And you can delete a channel you wish to remove. 2 Using the †… buttons, move the selection bar to “Setup” then press OK button to select.
CM Skip Time Setting the desired time using the …† buttons, then press the √ or OK 5 Select button. DVD-RAM(VR) System Clock Set √ Install When a program recorded on a DVD-RAM, a DVD-RW, or a DVD-R is played, the unit can be set to automatically skip a portion of the program corresponding to a CM(commercial) Skip Time set by the user. The program can then be played from a point after the CM Skip Time.
Setting Up NICAM Options the †… buttons, move the selection bar to “NICAM” then press √ 4 Using or OK button to select. DVD-RAM(VR) System Clock Set √ Install NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound by setting NICAM on or off.
Setting Up the Language Features the …† buttons to select the desired sub menu and press the OK or 4 Use √ button. ● ● ● If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie. If the selected language is not recorded on the disc, the original pre-recorded language is selected. the unit in Stop mode, press the 1 With MENU button on the remote control. System Setup 2 ● Audio Language: For the speaker sound.
Setting Up the Audio Options Audio Options Digital Output 1. PCM : Select this when you have no equipment that can decode Dolby Digital (or MPEG-2) signal. When you play Dolby Digital (or MPEG-2) sound track, the digital output are converted to PCM Stereo. Allow you to setup the Audio device and sound status depending on the audio system in use. the unit in Stop mode, press the 1 With MENU button on the remote. 2. Bitstream : Output Dolby Digital (or MPEG-2) audio as bitstream.
Setting Up the Display(Video) Options This function allows you to setup the TV screen settings. the unit in Stop mode, press the 1 With MENU button on the remote. System Setup You can’t use the Setup functions during playback. “Setup” using †… buttons, then 2 Select press the √ or OK button. 3 Select “Video” using †… buttons, then press the √ or OK button. Display(Video) Options This function depends on disc type. It may not work for some disc types.
Setting Up the Parental Control “Rating Level” you want using 6 Select †… buttons, then press the √ or OK button. • For example, if you select up to Level 6, discs that contain Level 7, 8 will not play. Larger number indicates the program is more intended to adult use only. DVD-RAM(VR) The Parental Control function works in conjunction with DVDs that have been assigned a rating which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
Before Recording Recording This unit can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference. Recordable discs This section shows various DVD recording methods. This recorder can record on the following discs. DVD-RAM ● ● DVD-RW DVD-R DVD-RWs and DVD-RAMs are rewritable.
Recording Formats Recording Mode When you insert an unused disc, the following message appears; Since available functions differ depending on the disc type, select a disc that best fits your preferences. DVD-RAM: Use after formatting the disc. Unformatted Disc Mode Do you want to format this disc? Yes Select one of four recording modes by pressing the REC MODE button repeatedly while the unit is in Stop mode for the desired recording time and picture quality.
About INFO. Key Recording the current TV program you are watching The INFO function allows you to view the current status and progress of playback and recording. Depending on the kind of disc and status, the displayed screen may be different. Before you start Check that the disc has enough available space for the recording. Adjust the recording picture quality mode.
the PROG ( / ) or number 3 Press ( ~ ) buttons to select the current program you want to record. the REC MODE button repeatedly, 4 Press (or Press the REC MODE button and then press the …† button) to select the recording speed(quality). ➞ To pause recording Press the REC PAUSE button to pause a recording in progress. ● Press the REC PAUSE button again to resume recording. ● You can switch channels by pressing the PROG ( / ) buttons while recording pauses.
Recording from external equipment you are watching Before you start Check that the disc has enough available space for the recording. Adjust the recording mode. the OPEN/CLOSE button, and 1 Press place a recordable disc on the disc tray. 5 Press the REC button. To pause recording Press the REC PAUSE button to pause a recording in progress. ● Press the REC PAUSE button again to resume recording. ● You can switch channels by pressing the PROG ( / ) buttons while recording pauses.
Reviewing Images Being Recorded (Time Slip) When the INFO. button is pressed again: Information about playback will appear. DVD-RAM(VR) Name Title Created Time Length Playing Time Title Protection 24 APR 2004 SAT This function lets you watch recently recorded 10-second images on the PIP screen while a recording is in progress. the TIME SLIP button during 1 Press DVD-RAM recording. Playing Info 04/APR/2004 12:00 PR7 15/15 04/APR/2004 12:00 - --:--:-- 00:02:05 Not Protected 12:00 When the INFO.
To view the current status of the disc and progress of recording : Press the INFO. button, and the information about the disc will appear. Making a One Touch Recording (OTR) DVD-RAM(VR) Disc Name Disc Info Total Title Total Playlist Recordable Time Protection Main Screen PIP Screen 24 APR 2004 SAT You can set the DVD Recorder to record in 30-minute increments by pressing the REC button. 15 2 03:00 SP Not Protected Recording: PR 1 [Mono] -12:00 Press the INFO. button once again.
Making a Standard Timer Before you start 1. Check the antenna cable is connected. 2. Check the remaining time of the disc. 3. Check the date and time are correct. Make sure the Clock has been set (Setup - System Setting) before you proceed with a timer recording. 5 Set timer recording option. • The Timer Recording screen is displayed. Fill the input items using the arrow buttons and number buttons. œ √ : Moves to the previous/next item, …† : Sets a value.
6 Press the OK button. ● will appear on the front panel. It means that a timer recording is registered. Editing a Standard Timer If you make a mistake Press the œ √ button to select the item you want to change. If the timer settings overlap The programs are recorded in order of priority.
the †… buttons to select “Edit”, and then press the OK button. 5 Press ● Deleting a Standard Timer The Timer Recording screen is displayed. Edit the items you want to modify. See the “Making a Standard Timer” section for more information on Timer Recording Input items. DVD-RAM(VR) Scheduled Record List Remaining Recording Time 02:12 SP No. Source Date 01 ----/- Source PR 01 02 CH 05 12/10 Start End Type Mode Edit No.
Recording the Standard Timer List When the start time in the Scheduled record list reaches while the set is in power off, the set will be powered on and start the recording automatically. the scheduled recording is 1 When operating, you can stop recording any time you want. To stop Recording Press the STOP( ) button, and the message that asks whether to end recording or not will be displayed.
Before Playing Playback Read the following information before playing a disc. Region code (DVD-Video only) Both the DVD recorder and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this recorder is described on the rear panel of the recorder. This section introduces basic functions of playback and playback by disc type.
■ NOTE ■ This DVD recorder can only operate with discs that are compatible with DVD-RAM Standard Version 2.0. Playback and/or recording may not work for some types of discs, or when specific operations, such as aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please refer to this if necessary. ■ Do not allow the disc to become dirty or scratched.
Using the Search Functions Using the Disc & Title Menu Some type of discs contain a dedicated menu system that allows you to select special functions for the title, such as chapters, audio tracks, subtitles, film previews, information on characters, etc. For DVD-VIDEO discs the DISC MENU button to enter 1 Press the disc menu of the disc. Searching through a Chapter or Track Move to the setup menu related to the playback operation.
About ANYKEY Skipping Chapters or Tracks ● During play, you can search quickly through a chapter or track. play, press the SKIP ( 1 During button on the remote control. ● ) If you press the ❙œœ button, it moves to the beginning of the chapter or track or marker(DVD-RAM, DVD-RW(VR mode)). Pressing the button once again within 3 seconds returns to the beginning of the previous chapter or track or marker(DVD-RAM, DVD-RW(VR mode)).
● If you want to move to a desired time to help you find a scene. Using the Repeat Function the ANYKEY button during 1 Press playback. DVD-VIDEO 1/10 1/40 00:01:45 Off ENG D 5.1CH Off Playing Repeatedly(Repeat Playback) 1/1 Off MOVE 2 CHANGE Press the …† buttons to select the “Time”. Using the REPEAT button 1 Press the REPEAT button. DVD-VIDEO 1/10 1/40 00:01:45 Repeat Off Off ENG D 5.
Using the ANYKEY button 1 the REPEAT button repeatedly to 2 Press select the “Track or Disc” you want to play repeatedly. CD Press the ANYKEY button. Music Repeat : Track Play Option : Normal 01. TRACK 1 00 : 52 DVD-VIDEO 1/10 1/40 01/12 00:01:45 Off ENG 01. TRACK 1 4:39 02. TRACK 2 4:31 03. TRACK 3 4:30 04. TRACK 4 3:53 05. TRACK 5 4:23 06. TRACK 6 4:24 D 5.
- To return to normal playback - - To return to normal playback - the REPEAT button repeatedly to 4 Press select “Off’. the REPEAT(A-B) button 4 Press repeatedly to select “Off”. Press the CANCEL button to return to normal playback. Using the ANYKEY button Playing a Certain section Repeatedly(A-B Repeat Playback) 1 Press the ANYKEY button. DVD-VIDEO 1/10 1/40 00:01:45 Off Using the REPEAT A-B button ENG D 5.1CH Off 1/1 Off 1 MOVE Press the REPEAT A-B button.
Selecting the Subtitle Subtitle languages may not work depending on the disc type. This is only available during playback. Selecting the Audio language Audio languages may not work depending on the disc type. This is only available during playback. Using the SUBTITLE button the SUBTITLE button during 1 Press playback. Subtitle Using the AUDIO button the AUDIO button during play1 Press back. Off Audio ENG Dolby Digital 5.
Changing the Camera Angle Zooming-In When a DVD-VIDEO contains multiple angles of a particular scene, you can select the Angle function. This is only available during playback. the ANYKEY button during 1 Press playback or pause. DVD-VIDEO 1 1/10 Press the ANYKEY button during playback. 1/40 00:01:45 Off ENG D 5.1CH Off 1/1 DVD-VIDEO Off 1/10 MOVE CHANGE 1/40 00:01:45 Off ENG D 5.1CH Off 1/3 Off MOVE 2 CHANGE the …† buttons to select “Zoom”, 2 Press and then press the OK button.
To view the current status and progress of playback : Press the INFO. button. Using PIP(Picture in Picture) The PIP function allows you to view a sub screen together with the main screen. You can view TV while playing a DVD disc. DVD-VIDEO Title Chapter Playing Time Main Screen PIP Screen 24 APR 2004 SAT 1 Press the PIP button. Info 1/10 1/40 00:01:10 Playback PR 1 [Mono] 12:00 The current disc is played in the PIP screen located at the bottom right of the screen.
Using Bookmarks Playing Back a Bookmark (V mode) the MARKER button during 1 Press playback. 1 Press the MARKER button. Press the œ √ buttons to select a 2 bookmarked scene. Bookmark Bookmark 1 2 MOVE OK RETURN MOVE the OK button when the desired 2 Press scene appears. The number 1 is displayed and the scene is memorized. Bookmark PLAY CANCEL RETURN the OK or button to start 3 Press playing from the selected scene. Clearing a Bookmark 1 1 Press the MARKER button.
Using Markers Playing Back a Marker (VR mode) 1 Press the MARKER button. the œ √ buttons to select a 2 Press bookmarked scene. N:0 Marker OK 2 Marker RETURN MOVE Press the OK button when the desired scene appears. The number 1 is displayed and the scene is memorized. Marker 1 Press the MARKER button. 01 01 02 PLAY N:2 CANCEL RETURN the OK or button to start 3 Press playing from the selected scene.
Playing an Audio CD/MP3 The Buttons on the Remote Control Playing an Audio CD (CD-DA)/MP3 Each disc has a variety of menu functions available. Playing an Audio CD(CD-DA) an audio CD (CD-DA) into the disc 1 Insert tray. The audio CD menu appears and the tracks (songs) are played automatically. CD Music Repeat : Off Play Option : Normal 01. TRACK 1 00 : 52 01/12 MOVE 01. TRACK 1 4:39 02. TRACK 2 4:31 03. TRACK 3 4:30 04. TRACK 4 3:53 05. TRACK 5 4:23 06.
Playing a MP3 Disc The Buttons on the Remote Control 1 Insert a MP3 Disc into the disc tray. The MP3 menu appears and the tracks(songs) are played automatically. MP3 Music Repeat : Off Play Option : Normal Straight from the heart 00 :22 ROOT Bryan Adams Bryan Adams_2 Straight from the heart ROOT 03/06 MOVE Run to you Heaven OK RETURN the …† buttons to select the 2-1 Press track (song) you want to hear, and then press the OK button or √ button.
Play Option Mode To Program Tracks You can register a maximum 30 tracks in the playlist. The Play Option can be used with an audio CD or MP3 in the Play or Stop mode. 1 Press the ANYKEY button. Repeat Mode will be highlighted. 1 Press the ANYKEY button. CD Music Repeat Mode will be highlighted. Repeat : Off Play Option : Normal 01. TRACK 1 CD Repeat : Off Play Option : Normal 01. TRACK 1 00 : 52 01/12 MOVE ● ● 00 : 52 Music 01. TRACK 1 4:39 02. TRACK 2 4:31 03. TRACK 3 4:30 04.
Playing a Picture CD the …† œ √ buttons to select a picture. 3 Press JPEG Photo Index 6 / 73 Slide Show ROOT / DSC01189 Page 2 / MOVE There are two types of Picture CD. One is a CD with only JPEG files. The other one is a CD with JPEG files and MP3 files.(mixed CD) ● 1. When mixed CD is played, a menu will be shown in order to have you choose which contents, either JPEG or MP3, you want to play. 1-1.
the …† buttons to select “Title List”, and then press the OK or √ 2 Press button twice. Playing the Title List The Title List screen is displayed. DVD-RAM(VR) Title List No. Title Follow these instructions to play back a scene from the Title List.
Press the INFO. button once again. Then you can check the information about the title under playback. Playing Info 21/APR/2004 11:50 PR11 Title 1/16 Created Time 21/APR/2004 12:00 Length 00:07:43 LP Playing Time 00:13:27 Title Protection Not Protected 21 APR 2004 WED 12:00 Title List Screen Elements DVD-RAM(VR) Name 3 4 DVD-RAM(VR) DVD-RAM(VR) No. Title 5 Title List 6 Length Edit No.
Editing This section introduces basic functions of DVD editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. Advance Editing (Play List) ................................68 Disc Manager .....................................................76 Title List Title refers to a recorded video and audio stream. Title List shows a list to help you select a title.
DVD-RAM(VR) Rename Basic Editing (Title List) A F K P U Z B G L Q V C H M R W D I N S X E J O T Y a f k p u z Back Space Renaming(Labeling) a Title Follow these instructions to rename a title list entry, i.e., to edit the title of a recorded program. b c d g h i l m n q r s n w x Space MOVE e j o t y Delete OK Clear RETURN Save EXIT the desired characters using the 4 Select arrow (…† œ √) buttons, press the OK button.
Locking(Protecting) a Title Follow these instructions to lock an entry to protect it from accidental deletion. Press the œ √ buttons to select “On”, then press the OK button. 4 and The key icon on the information window for the selected entry changes to the locked status. ( ➝ ) DVD-RAM(VR) Using the TITLE LIST button 1 Title List No.
the …† buttons to select “Delete”, and then press the OK button. 3 Press DVD-RAM(VR) Follow these instructions to delete a section of a Title List entry. Title List No. Title Length Edit 01 Drama 00:00:21 √ 02 Music Sports(A1) 19/APR/2004 00:00:03 √ 03 Sports 00:00:15 Play √ 04 Movie 00:00:16 Rename √ 05 Sports(A1) Delete 00:06:32 Edit 00:08:16 √ 06 Edu 1 12:00 MOVE Deleting a Section of a Title SP OK EXIT You will be prompted with the confirmation message.
the OK button at the starting 4 Press point. The image and starting point time are displayed in the section deletion starting point window. DVD-RAM(VR) the …† buttons to select “Delete”, and then press the OK button. 6 Press The selected section has been deleted. DVD-RAM(VR) Edit Title List Edit Title List Title List No. 05 Title List No.
5 Press the OK button at the end point. Advanced Editing (Play List) DVD-RAM(VR) Make Scene Scene No. 001 Start Start Creating a Playlist 00:10:00 19/APR/04 12:00 MOVE (VR mode) ● Press the MENU button with the disc stopped. the …† buttons to select “Playlist”, 2 Press and then press the OK or √ button. DVD-RAM(VR) Playlist New Playlist √ Edit Playlist √ MOVE OK Make New Playlist Follow these instructions to create a new playlist entry from a recorded title.
Playing Entries in the Playlist Follow these instructions to play the playlist entries. the …† buttons to select “Play”, and then select the OK button. 3 Press The playlist entries will be played. DVD-RAM(VR) Edit Playlist (VR mode) 1 No. Title Press the PLAY LIST button. The Edit Playlist screen is displayed.
Renaming a Playlist Entry Follow these instructions to rename a playlist entry, i.e. to edit the title of a playlist entry. the desired characters using the 4 Enter …† œ √ buttons. DVD-RAM(VR) Rename Dolphin (VR mode) A F K P U Z 1 Press the PLAY LIST button. The Edit Playlist screen is displayed. B G L Q V C H M R W D I N S X E J O T Y Back Space MOVE DVD-RAM(VR) a f k p u z b c d g h i l m n q r s n w x Space OK e j o t y Delete Clear RETURN Save EXIT Edit Playlist No.
Editing a Scene for the Playlist Playing a Selected Scene Follow these instructions to edit scenes for a playlist. (VR mode) 1 the arrow buttons to select the 4 Press scene you want to play, and then press the OK button. The playlist entry to be played is selected. Press the PLAY LIST button. The Edit Playlist screen is displayed. DVD-RAM(VR) Scene No. DVD-RAM(VR) Edit Scene 2/7 Playlist No. 2 Edit Playlist No.
Modifying a Scene (Replacing a Scene) the OK button at the end point of 7 Press the scene. DVD-RAM(VR) Modify Scene Scene No. 001 the arrow buttons to select the 4 Press scene you want to modify, and then press the OK button. Start Start End 00:00:00 00:00:25 Change Natural 23/APR/2004 03:34:00 DVD-RAM(VR) Scene No. Edit Scene 2/7 MOVE OK End 00:00:00 RETURN Cancel EXIT Playlist No.
Moving a Scene (Changing the Position of a Scene) ■ You cannot move the selected scene to the position of the next scene, because the selected scene should be inserted before that position, which requires no action. ■ Depending on the kind of disc, the displayed screen may have a slight difference. NOTE Press the …† œ √ buttons to select the 4 scene you want to move (change the position), and then press the OK button. DVD-RAM(VR) Scene No. Edit Scene 3/7 Playlist No.
the OK button at the end point of 7 Press the scene. DVD-RAM(VR) Copying a Playlist Entry to the Playlist Add Scene Scene No. 004 Using the PLAY LIST button Start Start 00:00:15 00:00:15 End Add Sclence 23/APR/2004 06:43 MOVE ● 8 End OK 00:00:35 RETURN Cancel EXIT 1 Press the PLAY LIST button. The Edit Playlist screen is displayed. DVD-RAM(VR) The image and time of the end point are displayed in the End window. Press the …† buttons to select “Add”, and then press the OK button. Scene No.
the MENU button after the 4 Press operation has finished. The menu screen will disappear. the …† buttons to select “Delete”, and then press the OK button. 3 Press DVD-RAM(VR) ■ NOTE You can create up to 999 scenes on one disc. In some cases, this may be different from the actual numbers. Edit Playlist Dolphin No.
the desired characters using the 4 Enter arrow buttons. Disc Manager DVD-RAM(VR) Rename Disc A F K P U Z Editing the Disc Name Follow these instructions to give a name to a disc. B G L Q V C H M R W D I N S X E J O T Y a f k p u z Back Space Space MOVE 1 Press the MENU button with the disc stopped.
Disc Protection Formatting a Disc Disc Protect allows you to protect your discs from being formatted or deleted due to unintended operations. Use these instructions to format a disc. The cartridge write protect tab should be set to the unprotect position. The disc protect should also be cleared. the MENU button with the disc 1 Press stopped. the MENU button with the disc 1 Press stopped.
DVD-RW ● You will be prompted with the confirmation message ‘Choose the recording format for DVD- RW.’ the …† buttons to select “Disc Manager”, and then press the OK or √ 2 Press button. DVD-RAM(VR) DVD-RW(VR) Disc Manager Disc Name : √ Disc Protection : Not protected √ Disc Format √ All Title format Lists for DVD-RW.
Cartridge Protection Info Disc Protect allows you to protect discs from disc formatting and program deletion due to unintended operations. The cartridge write protect tab should be set to the unprotect position to be able to make a recording to a DVD-RAM disc. the MENU button with the disc 1 Press stopped. DVD-RAM(VR) Finalising a disc After you record titles onto a DVD-RW/DVD-R disc with your DVD recorder, it needs to be finalised before it can be played back on external devices.
You will be prompted with the message 'Do you want to finalise disc?'. If you select Yes, you will be prompted again with the message 'Disc will be finalised. Do you want to continue?' DVD-RW(VR) Unfinalising a disc (V/VR mode) Disc Manager Disc Name : √ Disc Protection : Not protected √ Disc Format : DVD-VR √ Disc Do youFinalise want to finalise disc? Yes √ No the MENU button with the disc 1 Press stopped.
Press the œ √ buttons to select “Yes”, then press the OK button. 4 and The disc is unfinalised. ■ NOTE A DVD-RW can be finalised or unfinalised in Video mode. Unfinalise DVD-RW(V) Additional recording, protection Operation Same as DVD-Video and deletion are possible. Mark ■ Finalise DVD-Video(RW) A DVD-RW can be finalised or unfinalised in VR mode. Finalise Unfinalise Mark DVD-RW(VR:F) DVD-RW(VR) Operation Additional recording, deletion, editing, and protection are impossible.
Troubleshooting Additional Information If your product malfunctions, go through the checkpoints below before contacting a Samsung authorized service center. Power The input is displayed for a while when the power is turned on. Checkpoint 1 The DVD recorder requires some time to initialize and the input will be displayed for approx. 10 seconds after it is turned on. Recording Cannot record TV programs. Checkpoint 1 Check whether the power cord is securely plugged into the power outlet.
Differences between Using REC PAUSE Button and Using Stop Button during Recording Checkpoint 1 Each press of the Stop button during recording creates a title. When the REC PAUSE button is pressed, the paused state is kept. When the REC PAUSE button is pressed again during REC pause, the title under pause will be kept recording. Play mode settings are different from the settings configured in the Settings menu. Checkpoint 1 The disc does not support all selected functions.
Video Timer Recording The disc revolves, but no image or bad quality images are displayed. Timer lamp flickers. Checkpoint 1 Check whether there is damage to or any foreign material on your disc. Checkpoint 2 Some low quality discs may not play properly. Checkpoint 3 If scenes change from dark to bright suddenly, the screen may shake vertically temporarily, but this is not a fault. Checkpoint 1 Check there is enough space in the disc for recording.
Remocon Other problems. The remote control doesn't work. Checkpoint 1 Point the remote control at the remote control sensor on your DVD recorder. Allow for proper distance. Remove obstacles between your DVD recorder and the remote control. Checkpoint 2 Check whether the batteries are empty. Checkpoint 3 Check for the DVD or TV selection button. Checkpoint 1 Read the table of contents and then find and read the section describing your problem, and follow the instructions given.
Specifications Power requirements 230V AC, 50Hz Power consumption 35 Watts Weight General 3.75Kg Dimensions 430mm(W) x 280mm(D) x 68.5mm(H) Operating temp. 5°C to +35°C Other conditions Keep level when operating. Less than 75% operating humidity Composite Video : 1.0 V p-p at 75Ω load, sync negative Video (L1, L2) Input S-Video input (Y: 1.0Vp-p, C: 0.286Vp-p at 75Ω load) Audio (L1, L2) Max.