DVD Player DVD-P182 DVD-P183 www.samsung.
PRECAUTIONS 1. Setting up - Refer to the identification label located on the rear of your player for its proper operating voltage. - Install your player in a cabinet with adequate ventilation holes. (7~10cm) Do not block ventilation holes on any of the components for air circulation. - Do not push the disc tray in by hand. - Do not stack components. - Be sure to turn all components off before moving the player. - Before connecting other components to this player, be sure to turn them off.
DVD TV TV SOURCE STEP ZOOM VIDEO SEL. SUBTITLE + TV VOL ^ PLAY STOP TV CH ^ MENU RETURN ENTER DISC MENU EZ VIEW INFO OPEN/CLOSE AUDIO REPEAT CANCEL REPEAT A-B BEFORE YOU Remote Control BEFORE YOU Batteries for Remote STAR T Control (AAA Size) STAR T SELECT POWER SAMSUNG DVD TV SELECT POWER SAMSUNG DVD TV SOURCE TV STEP ZOOM VIDEO SEL. SUBTITLE TV VOL PLAY STOP - ^ TV CH TV SOURCE RETURN STEP MENU ZOOM VIDEO SEL.
SETUP General Features SETUP Excellent Sound Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction. General Features Screen Both regular and widescreen(16:9) pictures can be Excellent Sound viewed. Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction. Slow Motion An important scene can be viewed in slow motion. Screen Both regular and widescreen(16:9) Parental Control (DVD) pictures can be viewed.
Disc Type and Characteristics Disc Types (Logos) Recording Types DVD Audio + Video VIDEO-CD Audio + Video AUDIO-CD Disc Size Max. Playing Time Characteristics 12 Cm Single-sided 240 min. Double-sided 480 min. 8 Cm Single-sided 80 min. Double-sided 160 min. - DVD contains excellent sound and video due to Dolby Digital and MPEG-2 system. - Various screen and audio functions can be easily selected through the on-screen menu. 12 Cm 74 min. 8 Cm 20 min. 12 Cm 74 min. 8 Cm 20 min.
Description Description Front Front Panel Panel Controls Controls 11 22 33 1. 1. STANDBY/ON STANDBY/ON (( )) When WhenSTANDBY/ON STANDBY/ONisispressed pressedon, on,the theindicator indicator goes goesout outand andthe theplayer playerisisturned turnedon. on. 2. 2. STANDBY STANDBY indicator indicator When Whenthe theunit unitisisfirst firstplugged pluggedin, in,this thisindicator indicator lights. lights. 3. 3. DISC DISC TRAY TRAY Place Placethe thedisc dischere. here. 44 55 66 4. 4.
Rear Panel English 4 1 1. 2 3 - If Component(P-SCAN) Video Output is selected in Setup Menu, progressive scan mode will work. - If Component(I-SCAN) Video Output is selected in Setup Menu, interlaced scan mode will work. 5.1CH ANALOG AUDIO OUT JACKS - Connect to an amplifier with 5.1ch analog input jacks. 2. 3. VIDEO OUT JACK - Use a video cable to connect to the Video input jack on your television. - The Video Output in Setup Menu must be set to Component(I-SCAN).
DVD-P182-XTL 2/1/08 12:27 PM Page 8 Tour of the Remote Control 1 15 16 5. SEARCH Buttons ( ) / Allow you to search forward/backward through a disc. 6. VIDEO SEL.Button Change video output mode 7. SKIP Buttons ( ) / Use to skip the title, chapter or track. STOP Button ( ) 8. 9. 2 MENU Button Brings up the DVD player’s menu. /,¥/ Buttons 10. ENTER/ This button functions as a toggle switch. 17 3 4 5 6 7 8 9 18 19 20 21 10 11 12 13 22 23 24 14 25 11.
CONNECTIONS The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components you are connecting for more information on those particular components.
Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.) 1 Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV.
Connection to a TV (Progressive) 1 2 Using the audio cables, connect the AUDIO (red and white) OUT terminals of 5.1 CH (Front L-R)on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV. 3 BLUE RED English Using component video cables (not included), connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV.
Connection to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT terminals of 5.1 CH (Front L-R) on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO,COMPONENT OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT IN terminal of your TV. 3 Turn on the DVD player, TV, and Amplifier.
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier) 1 English If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO,COMPONENT OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT IN terminal of TV. 3 Turn on the DVD player, TV, and Amplifier.
Connection to a 5.1CH Analog Amplifier 1 If using audio cables for 5.1 CH Analog Amplifier (not included) connect the 5.1CH ANALOG AUDIO OUT terminals on the rear of the DVD player to the 5.1CH ANALOG AUDIO IN terminals of the 5.1CH Analog Amplifier. 2 Using the video signal cable(s), connect the VIDEO, COMPONENT terminals on the rear of the DVD player to the VIDEO,COMPONENT terminals of your TV as described on pages 9 to 11.
DVD-P182-XTL u 1/31/08 4:17 PM Page 15 Playing a Disc Before Play - Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote control. - If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press a NUMBER button.
Using the Search and Skip Functions During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track During play, press the SEARCH ( or ) button on the remote control for more than 1 second. DVD 2X, 4X, 64X, 128X VCD 4X, 8X CD 2X, 4X, 8X 2. Press the �/��buttons to select the desired item. - Only Menu Off is available for VCD2.0. Each press of the DISC MENU button toggles between Menu On and Menu Off. 3.
Note Using the A-B Repeat function - Depending on a disc, the Disc Menu may not work. - You can also use the Disc Menu, using the DISC MENU button on the remote control. - Only Menu Off is available for VCD2.0. Each press of the DISC MENU button toggles between Menu On and Menu Off. 1. Press the REPEAT A-B button at the point where you want repeat play to start (A). 2. Press the REPEAT A-B button at the point where you want the repeat play to stop (B). 3.
If you are using a 4:3 TV ADVANCED FUNCTIONS For 16:9 aspect ratio discs Adjusting the Aspect Ratio (EZ View) To play back using aspect ratio (DVD) Press the EZ VIEW button. - The screen size changes when the button is pressed repeatedly. - The screen zoom mode operates differently depending on the screen setting in the Display Setup menu. - To ensure correct operation of the EZ VIEW button, you should set the correct aspect ratio in the Display Setup menu. (See pages 27 to 28).
PCM 1/2 AUDIO 2. To remove the AUDIO icon, press the CANCEL or RETURN button. Note - This function depends on audio languages are encoded on the disc and may not work. - A DVD disc can contain up to 8 audio languages. - To have the same audio language come up whenever you play a DVD; Refer to “Using the Audio Language” on page 25. Selecting the Subtitle Language You can select a desired subtitle quickly and easily with the SUBTITLE button. Using the SUBTITLE button (DVD) 1. Press the SUBTITLE button.
- Playback will skip ahead 10 seconds. 1 2 - Note Depending on the disc, these functions may not work. Using the Instant Skip function Using the Bookmark (DVD) Use this function to skip playback about 10 seconds Function ahead of the current scene. This feature lets you bookmark sections of a DVD or Press INSTANT SKIP button. VCD the (Menu Off mode) so you can quickly find them -atPlayback skip ahead 10 seconds. a later will time.
Clips Menu for MP3/WMA/JPEG/CD Audio/MPEG4 - To select the Sub-Folder Press the �/� buttons to highlight right window. Press the �/� buttons to select the desired folder, then press ENTER. Open the disc tray. Place the disc on the tray. Close the tray. The tray closes and this screen displays. Stop Off 00:00:00 Root WMA JPEG English CD Audio or discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that can be organized into folders as shown below.
CD-R MP3/WMA file When you record MP3 or WMA files on CD-R, please refer to the following. - Your MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac. This format is the most widely used. - When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, .wma” as the file extension. General name format : Title.mp3. or Title.wma.
DivX5 Bitrate may fluctuate: 720 x 480 @30fps Device may skip decoding the 720 x 576 @25fps high bitrate portions and begin : Maximum bitrate : 4Mbps decoding again when Bitrate • : When this icon is selected and ENTER is pressed, the pictures change automatically with about a 6 second interval. • : The pictures change automatically with about a 12 second interval. • : The pictures change automatically with about a 18 second interval. returns to normal.
Setting Up the Language Features CHANGING SETUP MENU If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie. Using the Setup Menu Using the Player Menu Language The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have. 1. With the unit in Stop mode, press the MENU button. 2.
Using the Audio Language Using the DivX Subtitle Language 1. With the unit in Stop mode, press the MENU button. 2. Press the �/� buttons to select Setup, then press the � or ENTER button. 3. Press the �/� buttons to select Language Setup, then press the � or ENTER button. 4. Press the �/� buttons to select Audio, then press the � or ENTER button. buttons to select the desired language, then 5. Press the /� / press the or ENTER button.
put. lay ❶ Dolby Digital Out - PCM : Converts to PCM(2CH) audio. - Bitstream : Outputs Dolby Digital via the digital out put.Select Bitstream when connecting to a Dolby Digital Decoder. ❷ MPEG-2 Digital Out - PCM : Converts to PCM(2CH) audio. - Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or 8CH). Select Bitstream when using the Digital Audio Output. ❸ Dynamic Compression - On : To select dynamic compression. - Off : To select the standard range.
❷ Still Mode To make the Setup menu disappear or return to menu screen during set up, press RETURN button. • The subwoofer test output signal is lower than the other speakers. • The MPEG Multichannel logo is a trademark registered by PHILIPS Corporation. • If you set Front (L, R) “Small”, LFE (Subwoofer) is set “On” automatically. These options will help prevent picture shake in still mode and display small text clearer. - Auto : When selecting Auto, Field/Frame mode will be automatically converted.
PARENTAL SETUP DISPLAY SETUP TV Aspect : 4:3 L-Box Still mode : Auto Screen Messages : On Black Level : Off TV System Video Output I-SCAN Rating level : Kids Safe Change Password P-SCAN Enter Return Menu • Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system. • If Video Output is set incorrectly, the screen may be blocked.
4. Press the �/� button to select Change Password, then press the � or ENTER button. Enter your password (default password). Enter the new password again.
DVD-P182-XTL u 1/31/08 4:17 PM Page 31 Troubleshooting Before requesting service (troubleshooting), please check the following. Page No operations can be performed with the remote control. • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 20 feet. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it.
Specifications General Power Requirements AC 110-240 V, 60/50 Hz Power Consumption 9W 1.7 Kg Weight 360mm (W) X 203mm (D) X 37mm (H) Dimensions +5°C to +35°C Operating Temperature Range Operating Humidity Range 10 % to 75 % DVD (DIGITAL VERSATILE DISC) Disc Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. CD : 12Cm (COMPACT DISC) Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min. CD : 8Cm (COMPACT DISC) Reading Speed : 4.8 ~ 5.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP.
Memo 34
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. ☎ 3030-8282/1800-1100-11/www.samsung.