Manual

Tuner Band Setting Auto Channel Search
This feature allows you to manually set the DVD-VCR's tuner band
to Antenna or Cable, whichever you connected to the Antenna In
jack during initial setup.
* Use this setting only ffAuto Setup detected the incorrect tuner
band, Le. channels are coming in on the wrong channel numbers.
1 Open "SETUP MENU"
Press the SETUP button.
2 Select "VCR & Channel Setup"
Using the up]down, move the selection arrow to "VCR & Channel
Setup," then push right to select.
3 Select "Channel Setup"
Move the selection arrow to "Channel Setup," then push right to
select.
4 Select "Tuner Band"
Move the selection arrow to Tuner Band," then push right to select
from the following options:
• Auto - Automatically detects the Tuner Band.
• Antenna - indicates that the DVD-VCR is connected to an indoor
or outdoor VHF]UHF antenna.
• Cabte - Indicates that the DVD-VCR is connected to either
Community Antenna Television (i.e., cable TV without a cable
box).
Auto Channel Search will automatically seek and store all active
channels in your area.
1 Open "SETUP MENU"
Pressthe SETUP button,
2 Select "VCR & Channel Setup"
Usingthe up/down,move the selection arrow to"VCR & Channel
Setup,"then push rightto select.
3 Select "Channel Setup"
Move theselection arrow to "ChannelSetup,"then push right to
select.
4 Run "Auto Channel Search"
Move theselection arrow to "AutoChannel Search,"then push right
to setect.
• The DVD-VCR wiil automatically search for all available
channels in the selected Tuner Band. This procedure may take
a few minutes to complete,
• When finished, the lowest channel found wiil be displayed,