Manual

CONNECTIONS
Connecting the Antenna Cable
There are several ways to connect your DVD-VOR. Select one of the following antenna connections that best
suits you below.
B Method 1: Antenna + DVD-VCR + TV: No Cable box
B Method 2: Antenna +Cable box + DVD-VCR + TV: Cable box with many scrambled channels
B Method 3: Antenna + DVD-VCR + Cable box +TV: Cable box with a few scrambled channels
- If you are using an off-air antenna that has 300-ohm twin flat leads, use an external ©
antenna connector (300-75 ohm adaptor: not supplied) to connect ihe antenna to the
DVD-VCR. _,==_ _
- If you have two separate antennas (one VHF and the other UHF), use a UHF/VHF
combiner-adaptor (available at most electronics shops) to connect the antenna to the
DVD-VOR.
- The RF OUT(TO TV) jack of this product sends signals received through the antenna
and output Audio/Video signals.
Method1 : Antenna + DVDoVCR + TV: No Cable box
You Can record non-scrambled Channels by __
selectingthechanne,o0theOVO VCR
Atso use this Method if YOUwatch channels
without cable box. RFIN
out RF
T(_RF CUT
T_ Antennacable
T'_Antepna Input
ENG-11