User Manual
GB
21
GB
20
Clearing a Preset Station
If you have stored a TV station:
◆ That you do not require
◆ At the wrong programme position
you can cancel it.
1 Press the SETUP button on the remote control.
2 Press the corresponding
,
or , buttons to select the
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the corresponding or buttons, until the MANUAL SET
U P option is selected.
5 Press the ENTER button to select this option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or buttons, until the required preset
TV station is selected. (P R)
7 Press the CLEAR button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the RETURN button three times to exit the
menu.
Presetting the Stations Manually
☛ You do not need to preset the stations manually if you
have already set them automatically.
1 Press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding
,
or , buttons to select the
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the corresponding or buttons, until the MANUAL SET
U P
option is selected.
5 Press the ENTER button to select a MANUAL SET UP option.
Result: The TV STATION TABLE menu is displayed.
6 Press the or buttons to select a programme number as
required.
7 Press the button to preset the station.
Result: The MANUAL TUNING menu is displayed.
8 Press the or buttons to start scanning.
Result: The frequency band is scanned and the first station
found is displayed.
9 Press the or buttons until the N A M E is selected.
The station name is set automatically from the broadcast signal.
10 To change the programme’s name, press the button.
Result: The first letter of the name flashes.
11 To... Then...
Select a character Press the
or
button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the or buttons
previous character respectively.
12 If you... Then...
Wish to store the ◆ Press the or buttons until the M F T
station displayed is selected.
◆ Press the or buttons to adjust the
picture, if necessary.
◆ Press ENTER to store the station
Do notwish to ◆ Press the or buttons until the
store the station
CH is selected.
displayed ◆ Press the or buttons to go on
scanning the frequency band and display
the next station
◆ Go back to the beginning of Step 12
13 Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
14 On completion, press the RETURN button three times to exit the
menu.
☛ You do not need to preset the stations manually if you
have already set them automatically.
VCRVCR
TV STATION TABLE
P R C H NAME
1
2
3
4
5
SWAPPING:ENTER
RETURN DELETE:CLEAR
MANUAL TUNING
P R :
C H : ---
M F T : -
N A M E : ----
MEMORY:ENTER
RETURN
MAIN MENU
INSTALLATION
RETURN ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN ENTER
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
Newzealand Model
TV STATION TABLE
PR CH NAME
1 003
2
3
4
5
SWAPPING:ENTER
RETURN DELETE:CLEAR
MAIN MENU
INSTALLATION
RETURN
ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN ENTER
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
Newzealand Model
00114A DVD-V6500/XSA-GB2 11/21/02 1:52 PM Page 20