User Manual

GB
23
GB
22
Setting the DVD-VCR Output Channel
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding , or , buttons to select the
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the or buttons, until the VCR OUTPUT CHoption is
selected.
5 Select the required output channel (CH21~CH69) by pressing the
or buttons (Australia:CH28 ~ CH69).
6 On completion, press RETURN twice to exit the menu.
Then tune your television again (see page 14).
Changing the Preset Station Table
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
1 Press the SETUP button on the remote control.
2 Press the corresponding , or , buttons to select the
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the corresponding or buttons, until the MANUAL SET
U P option is selected.
5 Press the ENTER button to select this option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or buttons, until the required preset
TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
7 To change the programme number assigned to a station press the
ENTER button on the remote control (For example; To move a TV
station in programme 1 to programme 3).
8 Press the or buttons to select required position and the press
ENTER again to swap the position.
9 On completion, press the RETURN button three times to exit the
menu.
VCR
VCR
TV STATION TABLE
PR CH NAME
1 003
2
3
4
5
SWAPPING:ENTER
RETURN DELETE:CLEAR
TV STATION TABLE
PR CH NAME
1
2
3 003
4
5
SWAPPING:ENTER
RETURN DELETE:CLEAR
MAIN MENU
INSTALLATION
RETURN
ENTER
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN ENTER
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
Newzealand Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH38
RETURN ENTER
Australia Model
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
Newzealand Model
MAIN MENU
INSTALLATION
RETURN ENTER
Selecting the RF OUT Sound Mode (B/G-D/K)
(Newzealand Model only)
You can choose the sound mode (B/G or D/K) according to the TV
set connected to your VCR.
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding , or , buttons to select the
I N S T A L L A T I O N option.
3 Press the ENTER button to select this option.
Result: The I N S T A L L A T I O N menu is displayed.
4 Press the or buttons, until the TV SYSTEM option is
selected.
5 Press the or button to select G or K.
6 On completion, press RETURN to exit the menu.
VCR
INSTALLATION
AUTO SET UP
MANUAL SET UP
TV SYSTEM :G
VCR OUTPUT CH :CH36
RETURN ENTER
00114A DVD-V6500/XSA-GB2 11/21/02 1:52 PM Page 22