User Manual

GB
25
GB
24
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the SETUP button on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding , or , buttons to select the
USER SET option.
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the I P C option is
selected.
5 Press the button to select the IPC (intelligent picture control)
option.
➢ When intelligent picture control mode is
O N, the sharpness
of the image is adjusted automatically.
6 To adjust the sharpness manually, press the
button to turn the
IPC mode
O F F
.
7 Press the or buttons until the picture is displayed according to
your preferences.
➢ If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8 On completion, press the RETURN button again.
VCR
Selecting the Colour Mode
Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
➢ ◆ When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
◆ When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding , or , buttons to select the
USER SET option.
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the COLOUR
S Y S T E M
option is selected.
5 Press the button to select A U T O ➝ P A L ➝ M E S E C A M ➝ B / W.
AUTO When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
6 On completion, press RETURN twice to exit the menu.
USER SET
COLOUR SYSTEM : A U T O
IPC : O N
AUTO POWER OFF : O F F
RETURN
USER SET
COLOUR SYSTEM : A U T O
N I C A M : O N
IPC : O N
AUTO POWER OFF : O F F
RETURN
VCR
Australia Model
Newzealand Model
NICAM (Newzealand Model only)
VCR
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 34.
1 Press SETUP on the remote control.
Result: The MAIN MENU is displayed.
2 Press the corresponding , or , buttons to select the
USER SET option.
3 Press the ENTER button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the N I C A M option
is selected.
5 To... Press or , until...
Mono mode O F F is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode O N is displayed.
ON: Normally set at this position.
6 On completion, press RETURN twice to exit the menu.
MAIN MENU
USER SET
RETURN ENTER
USER SET
COLOUR SYSTEM : A U T O
N I C A M : O N
IPC : O N
AUTO POWER OFF : O F F
RETURN
MAIN MENU
USER SET
RETURN ENTER
USER SET
COLOUR SYSTEM : A U T O
IPC : O N
AUTO POWER OFF : O F F
RETURN
USER SET
COLOUR SYSTEM : A U T O
N I C A M : O N
IPC : O N
AUTO POWER OFF : O F F
RETURN
Australia Model
Newzealand Model
00114A DVD-V6500/XSA-GB2 11/21/02 1:52 PM Page 24