User Manual

51
GB
50
GB
A/V Receiver Connections
To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
Before You Begin...
• If your A/V receiver is equipped with a Dolby Digital Decoder,
you have the option to bypass the DVD-VCR’s built-in Dolby
Digital Decoder. Use the DIGITAL AUDIO OUT connection
below.
1 Digital Audio Out
Connect EITHER an optical cable OR a digital coaxial cable from
the DIGITAL AUDIO OUTjacks on the back panel of the DVD-VCR
to their corresponding Digital Audio Input jacks on your A/V
Receiver:
• Optical
• Coaxial
• Use whichever connection is available on your A/V Receiver.
To Digital Audio Input of an A/V
Receiver with a Dolby Digital
Decoder
OR
DVD
Setting Up the Display Options
1 With the unit in Stop mode, press the SETUP button on the remote.
Result: The MAIN MENU is displayed.
2 Press the corresponding , or , buttons to select the DVD
option.
3 Press the ENTER button to select this option.
Result: The DVD SETUP menu is displayed.
4 Use the or buttons to select Display Options.
Then press the ENTER button.
5 Use the or buttons to select the desired item.
Then press the or buttons or then press the ENTER button.
Use the or buttons to select the desired item.
Then press the ENTER button.
• TV Aspect
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
4:3 Letter Box : Select when you want to see the total 16:9
ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars
will appear at the top and bottom of the screen.
4:3 Pan-Scan : Select this for conventional size TVs when you
want to see the central portion of the 16:9
screen. (Extreme left and right side of movie
picture will be cut off.)
16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
• Black Level
Adjusts the brightness of the screen.
• Quasi-PAL
Depending on a disc, you can play a NTSC DVD disc by
Quasi-PAL mode.
• DVD Out
Component : Sends COMPONENT signal (Y, Pb, Pr) to the
component video out JACK.
S-Video : Sends S-VIDEO signal to the S-VIDEO OUT JACK.
➢ • How to make the DVD SETUP disappear or return to
menu screen during set up: Press the RETURN button.
DVD SETUP
Disc Menu English
Audio English
Subtitle Automatic
Parental Unlocked
Audio Options
Display Options
RETURN
ENTER
MAIN MENU
DVD SETUP
RETURN ENTER
RETURN ENTER
DISPLAY OPTIONS
TV Aspect 4:3 L-Box
Black Level Low
Quasi-PAL Off
DVD Out Component
DVD
00114A DVD-V6500/XSA-GB3 11/21/02 1:53 PM Page 50