User Manual

Plug & Auto Set Up

Connecting Other Equipment to Your DVD-VCR

You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following

illustrations give a few examples of the connection possibilities.

➢ The RCA input/output connectors on the rear of the DVD-VCR are used for

equipment, such as camcorders, VCRs or sound systems.

REAR OF THE DVD-VCR

Camcorder

VCR

Sound system

Your DVD-VCR will automatically set itself up when it is plugged

into the mains for the first time. TV stations will be stored in

memory. The process takes a few minutes. Your DVD-VCR will

then be ready for use.

1 Connect the coaxial cable as indicated on page 11.

(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)

2 Plug the DVD-VCR into the mains.

Result: The LANGUAGE SET menu is displayed.

3 Select the required language by pressing the or buttons.

4 Press ENTER to store the language selected.

Result: A message appears.

5 Press ENTER to start the auto scanning.

◆ The number of stations automatically stored by the DVD-VCR

depends on the number of stations that it has found.

6 On completion, press RETURN twice to exit the menu.

➢

◆

Auto preset can be performed by pressing (STOP) on the

DVD-VCR continuously for 5 seconds or more with no tape

inserted.

AUTO SET UP

PLEASE WAIT

6 0

■ ■ ■ ■ ■■ ■ ■■■ ■■

- - - - - - - I

RETURN

00114A DVD-V6500/XSA-GB1 11/21/02 1:51 PM Page 12