Manual

II Method 3 :Antenna + DVD
BB
Recorder-VCR + Cable box +TV :
Cable box with a few scrambled
channels
You can record non-scramhled channels hy sdccting tlw
channel on the cahle box. 3_mcannot record scramhled
channels that require a cable box.
=IN
RF
J/##y/_ To RFOUT I
RF Cable
Compared to standard interlaced video, progre_,qve scan
doubles the amount of video beam lines fed to your TV,
resulting in a more stable, flicker-[ree, and clear image than
interlaced video. The progre_,qve scan video output jack is
used in progre_c, ive output mode. This is only availahle
with T\% that support progre_,_ive scan.
Consumers should note that not all high definition televi-
sion sets arc fully compatihle ;'dth this product and may
cause artifacts to be displayed in the picture. If you experi-
ence 525 progressive scan picture problems, it is recom-
mended that yon switch the connection to the standard
definition' output. If there are questions regarding TV set
compatihility with this unit, please contact our customer
service center at 1-800-SAM%ING.
| Method 1 : Connecting to a video
input jack
Connect a video(yellow) cable between the VIDEO (yellow)
OUTjack on DVD Recorder-VCRand VIDEO(yellow) IN
jack on the TV(or AVamplifier).
• 5_n ;,,'ille*!joyregular quality images.
• Connect audio cables (white and red) between the ANA-
LOG AUDIO OUT jack on the DVD Recorder-VCR and
AUDIO IN jack on TV (or AVamplifier).
Step3:Connectingthe
VideoCable
There are several ways to connect your DVD RecoMer-VCR.
Select one of the following video connecting methods that
hest suits you helow.
• Method 1 : Connecting to a Video input jack
• Method 2 : Connecting to an S-videoinput jack
• Method 3 : Connecting to Component video input jacks in
480i mode
• Method 4 : Connecting to Component video input jack ¢,in
480p mode
S-Video, Component video and Progressive Output
Modes
• S-Videoand Component video output arc availahle only if
your TV supports S-Video input or Component video
input, respectively If S-Videoor Component video output
does not work, check the TV connections and the TV
input selection settings.
yellow
yellow _ @ WOE(
!
16 - English