Instructions Getting to Know your camera Use this camera in the following order. Setting up the application software Take a picture Insert the USB cable Check the camera's power Check [Removable Disk] To use this camera with a PC, install the application software first. After you have done this, you can move the stored images in the camera to you PC and can edit them using an image editing program. Take a picture. (p.
Danger Warning DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not attempt to modify this camera in any way. To do so may result in fire, injury, electric shock, or severe damage to you or your camera.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or damaged battery could result in fire or injury. - Only use battery with the correct specifications for the camera. - Do not short circuit, heat or dispose of battery in fire. - Do not insert the battery with the polarities reversed. Remove the battery when not planning to use the camera for a long period of time.
Contents READY 007 System chart 007 007 008 008 009 010 010 011 011 011 012 015 016 018 020 Package Contents Sold Separately Identification of features Front & Top Back Bottom 5 Function button Self-timer lamp Camera Status Lamp Mode icon Connecting to a Power Source Inserting the memory card Instructions on how to use the memory card Waterproof management When using the camera for the first time 028 028 029 030 030 030 031 032 033 034 035 037 038 038 038 039 RECORDING 021 LCD screen indicator 022 023 02
Contents 047 047 047 048 048 049 050 051 051 052 052 052 053 053 054 054 Face Tone Face Retouch Auto Focus type Metering Photo Style Selector Smart Filter Image Adjust ACB Drive mode DIS Movie Clip frame stabiliser Smart Scene Detection Voice Memo Voice Recording Recording a movie clip without voice Setting movie recording SETUP 055 Sound menu 055 055 055 055 055 056 056 Sound Volume Start up sound Shutter sound Beep sound AF sound Setup menu 056 056 056 057 057 057 057 058 058 058 059 059 059 060 060 0
Contents 065 066 066 066 066 069 069 070 070 071 072 073 073 074 074 075 076 077 077 078 079 079 079 6 LCD screen Indicator Using the camera buttons to set the camera Play mode button Thumbnail / Enlargement button Smart Album Info (DISP) / Up button Play & Pause / OK button Left / Right / Down / MENU button Delete button Setting the playback functions using the LCD Screen Setting the playback PictBridge function using the LCD screen Edit Resize Rotating an image Photo Style Selector Smart Filter Image Adj
System chart Please make sure your package contains the contents listed below before using this product. The contents can vary depending on the sales region. To buy the optional equipment listed under Sold Separately, contact your nearest Samsung dealer or Samsung service center. The appearance of the parts and accessories in your package may differ from the illustrations below.
Identification of features Front & Top Flash POWER button Shutter button Speaker Lens USB / AV / DC terminal Strap eyelet 8 Self-timer lamp / AF Lamp Microphone
Identification of features Back Camera status lamp Zoom button MODE button LCD Screen 5 function button Fn / Delete button MENU button Play mode button 9
Identification of features Bottom 5 Function button Battery chamber Information / Up button OK / Play & Pause button Self-timer / Right button Flash / Left button Battery holder Macro / Down button Memory card slot Battery chamber cover Tripod socket Ä To open the battery chamber cover, slide it in the direction shown above.
Identification of features Self-timer lamp Icon Mode icon Status Description - For the first 8 seconds, the lamp blinks at 1 second intervals. Blinking - For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking For the 2 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Connecting to a Power Source You should use the rechargeable battery BP70A supplied with the camera. Be sure to charge the battery before using the camera. BP70A rechargeable battery Specification Model BP70A Type Lithium lon Capacity 740mAh Voltage 3.7V Charging time Approximately 150 Minutes Number of images and battery life: Using the BP70A Battery life / Number of images Conditions Using the fully charged battery, Default settings, Program mode, Shot to shot interval: 30Sec. Approx.
Connecting to a Power Source Important information about USB cable usage. Use a USB cable with the correct specification. Do not connect the camera to a PC through a USB hub. Connect the camera directly to the PC. Do not connect the camera and other devices to a PC at the same time. Connect the camera by itself. If your PC can not detect the camera when you use the front side USB port, use the back side USB port of computer.
Connecting to a Power Source When using the battery, please follow these guidelines. Failure to do so may cause heat, fire, or explosion. Ɣ If you find the battery is bulging or distorted, contact a service center. It may present a physical danger. Ɣ Use only the recommended battery charger. Ɣ Do not place the product close to a fire or any high temperature source. Ɣ Do not insert the product into a microwave oven. Ɣ Do not leave the product inside a car during the summer.
Connecting to a Power Source Inserting the memory card Insert the battery as shown Insert the memory card as shown. - If the camera does not turn on after you have inserted battery, please check whether the battery (+ / -) direction is right. - Turn off the camera’s power before inserting the memory card. - Have the front label of the memory card facing toward the front of the camera (Lens) and the card pins toward the back of the camera (LCD screen).
Instructions on how to use the memory card Be sure to format the memory card (see p.58) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognize, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Instructions on how to use the memory card The camera can use SD/SDHC Memory Cards. Card pins When using a 1GB SD memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type. Recorded image size Write protect switch Label [SD (Secure Digital) memory card] Still image The SD/SDHC memory card has a write protect switch that prevents image files from being deleted or formatted.
Waterproof management You can use this camera underwater to a maximum depth of 9.8 feet (3m) in an ocean, lake, or similar underwater environment for one hour. To ensure the camera operates properly underwater, you must practice the correct waterproof management before and after using the camera, as follows. Ŷ Before using the camera 1. Make sure that there is no dirt, dust, or sand on the camera and that the lens is always kept clean.
Waterproof management 4. Open the battery compartment and the USB compartment and look for water drops on the inside of the covers . If there are water drops on either, use cotton swab to remove the drops before storing the camera. Ŷ Storage and maintenance - Do not store the camera in an environment with high or low temperature. The waterproof function may be damaged. - Do not use any chemicals to clean, to prevent rust, or to repair the camera. The waterproof function may be damaged.
When using the camera for the first time Charge the rechargeable battery fully before using the camera for the first time. Setting up the Time Zone When the camera is turned on for the first time, a menu will be displayed on the LCD screen to set date, time, time zone and language. This menu will not be displayed again after you set up the date, time, time zone, and language. Set up the date, time, time zone, and language before using this camera. 1.
LCD screen indicator The LCD screen displays information about the shooting functions and selections. [Image & Full Status] No. 1 Description Icons Page No. Description 5 Battery p.15 6 Photo Size / Movie Size p.40 7 Image Quality / Frame Rate p.40 8 Metering p.48 9 Flash p.35 10 Self-timer p.37 11 Macro p.33 12 Face Detection p.43 Date / Time 14 Optical / Digital Zoom bar / Digital Zoom rate p.31 15 Camera shake Warning p.29 16 Auto Focus Frame p.47 17 DIS p.
How to use the menu 1. Turn on the camera, and then the MENU button. A menu for each camera mode appears. Shooting Photo Size Quality Sound EV Display ISO Settings White Balance Face Detection Smart FR Edit Exit Change 2. Use the up or down button to navigate through the menus. Photo Size Shooting Quality Sound EV Display ISO Settings Press the Up or Down button.
Starting the recording mode Selecting modes How to use Smart Auto mode ( You can select the shooting modes by using the MODE button on the back of your camera. How to use the MODE button 1. Press the MODE button. A menu appears. 2. Select a desired mode by pressing the Up / Down button, and then press the OK button. ) In Smart Auto mode, the camera automatically chooses the appropriate camera settings based on the type of scene (Night, Land-scape, etc.) it detects.
Starting the recording mode If the camera does not recognize a proper scene mode, the default settings are used. Even if there is a face detected, the camera may not select a portrait mode depending on the subject’s position or lighting. The camera may not select the correct scene depending on shooting conditions, such as camera shake, lighting, and distance to the subject. The [Night] mode recognizes scenes only when the flash is set to off.
Starting the recording mode How to use the Scene modes ( ) The Scene modes are listed below. Using Scene modes, you can easily configure the camera so that it automatically uses the optimal settings for a given shooting situation. 1. Select Scene mode by using the MODE button. (p.23) 2. Point the camera towards the subject and compose the image using the LCD screen. 3. Press the shutter button to capture an image.
Starting the recording mode Ŷ How to use the [Frame Guide] mode Set [Frame Guide] mode when you want someone else to take a picture for you from the angle you choose. 1. Take a picture from the angle you choose. - A guide appears round the sides of the picture. Changing the Shutter speed and Aperture value in Night scene mode. Cancel Frame: OK Guide 2. Then another person can take the picture by aligning the edge of the picture to be taken with the guide framing the sides of the window.
Starting the recording mode How to use the Movie clip mode ( ) You can record a movie clip for as long as there is recording time available in the camera’s memory. 1. Select the Movie mode by using the MODE button. (The camera displays the Movie Clip icon and the available recording time on the LCD screen.) 2. Point the camera towards the subject and compose the image using the LCD screen. 3. Press the shutter button once and movie clips are recorded for as long as the available recording time allows.
Starting the recording mode Recording HD (High Definition) movie clips Recording a movie clip without sound You can record HD (High Definition) movie clips (1280x720HQ, 30 fps) using H.264 (MPEG4.AVC) video compression. H.264 (MPEG4.AVC) is the standard for digital video codecs. It supports high quality video in small size files. You can record a movie clip without sound. 1. Select the Movie mode by using the MODE button. (p.23) 2. Press the MENU button to set the resolution to [1280 X 720 HQ]. 3.
Things to Watch Out for When Taking Pictures Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [Lightly press the shutter button] [Press the shutter button] Under certain conditions, the auto focus system may not perform as expected. - When photographing a subject that has little contrast. - If the subject is highly reflective or shiny.
Using the camera buttons to set the camera SHUTTER button You can set the recording mode function can be set up by using the camera buttons. Used for taking an image or recording voice in the Recording mode. POWER button Used for turning the camera’s power on / off. If there is no operation during a specified time, the the camera turns off automatically to save battery life. Refer to page 60 for more information about the auto power off function.
Zoom button When the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. This camera has a 5X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 25X. TELE Zoom Optical zoom TELE Digital zoom TELE WIDE Zoom Optical zoom WIDE : Pressing the ZOOM W button to zoom out from the subject. The subject will appear further away. Pressing the ZOOM W button continuously sets the camera to its minimum zoom setting.
Zoom button Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. You may notice a decrease in image quality when using the digital zoom. You can’t activate the digital zoom in the [Movie] and some Scene modes. Info (DISP) / Up button While the menu is showing, the Up button operates as a direction button. In the recording modes or playback mode, pressing this button displays the image information.
Macro ( ) / Down button While the menu is showing, the Down button operates as a direction button. When the menu is not showing, you can use the Macro ( ) / Down button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator appears on the LCD screen.
Macro ( ) / Down button Focus lock Focusing methods you can select, by recording mode ( o : Selectable, : Infinity focus range) Mode Mode Auto Macro Auto Macro Macro Normal o o o o SCENE Macro Normal o o o To focus on a subject not positioned in the center of the picture, use the focus lock function. Using the Focus Lock 1. Ensure the subject is in the center of the autofocus frame. 2. Press the shutter button halfway.
Flash ( ) / Left button If you press the shutter button after selecting the flash, the first When the menu is displayed on the LCD screen, pressing the Left button makes the cursor shift to the left tab. When the menu is not displayed on the LCD screen, the Left button operates as the Flash ( ) button. [Selecting the Auto flash] Selecting the Flash mode 1. Select the desired Recording mode, except for the [Movie] mode. (p.23) 2.
Flash ( ) / Left button Flash modes you can select, by recording mode Flash mode indicator Icon Flash mode Auto flash Description If the subject or background is dark, the camera flash will operate automatically. Auto & Red eye reduction If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the redeye reduction function. Fill in flash The flash fires regardless of the available light.
Self-timer ( ) / Right button When the menu is displayed on the LCD screen, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD screen, the Right button operates as the Self-timer ( ) button. Use the Self-timer when you would also like to be in the picture. If you press the Self-timer button during the self-timer operation, the self-timer function is cancelled. Use a tripod to prevent the camera from shaking.
MENU button Shooting ( - When you press the MENU button, a menu related to each of the camera’s major functional areas is displayed on the LCD screen. Pressing it again returns the LCD to the initial display. - The menu screen is available in the [Smart Auto], [Program], [Scene], [Movie] and [Smart Movie] modes, but it is not available if you select the voice recording function. ) To access a functional sub-menu, use the menu that contains the sub-menu, or press the FN key.
Shooting ( Mode ) Available When Camera Set To Sub-Menu Page 3. Select a desired menu by pressing the Up / Down button and then press the OK button. p.51 Drive DIS Photo Size p.52 Photo Size Quality Quality EV EV Up / Down button ISO White Balance Face Detection p.52 Stabilizer (Shooting) p.52 Voice p.53 Long Time Shutter p.26 How to Enable Functions Using the MENU Button 1. Press the MENU button in an available mode. 2.
Shooting ( ) Quality / Frame rate Photo Size / Movie Size (Image Resolution) You can select the photo size / movie size appropriate for your application. (Unit: pixel) You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality.
Shooting ( ) Exposure compensation ISO This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the [EV] menu. You can select the ISO sensitivity when taking pictures.The speed or specific light-sensitivity of a camera is rated by ISO numbers. Compensating Exposure 1. Click the Up/Down button from the Shooting menu to select [EV] ( ). EV 2.
Shooting ( ) Using the Custom White Balance White balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up a custom white balance. The white balance control allows you to adjust the colors to appear more natural.
Shooting ( ) Face Detection If you use face detection options, your camera can detect a human face. When focusing on a human face, the brightness of the face is also adjusted. You can also capture natural facial expressions by using self portrait, smile shot or blink detection. Face Detection Back Move Normal This mode detects the face of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy pictures of faces.
Shooting ( ) Self Portrait When taking pictures of yourself, the area of your face is automatically detected so that you can take self portraits easily and quickly. Ä Selectable modes: Program, Beauty Shot, Portrait, Children, Beach & Snow 1. For self-filming, point the camera lens towards your face. It automatically detects your face and emits a guiding sound. 2. Start filming by pressing the shutter button.
Shooting ( ) Smart Face Recognition Ä Selectable modes: Program, Beauty Shot, Portrait, Children, Beach & Snow The camera automatically registers faces that you frequently photograph. This feature will automatically prioritize the focus on those faces and favorite faces. This feature is available only when you use a memory card. The same person can be recognized as a different person and vice versa depending on glasses, brightness, extreme change of pose or facial expressions.
Shooting ( ) You can register up to 8 favorite faces. The flash option will be set to Off. If you register the same face twice, you can delete one of the faces in the face list. Smart FR Edit You can register frequently shot faces or edit the registered face list prior to shooting. This feature is available only when you use a memory card. Smart FR Edit Back Face List Move My Star You can change the ranking of your favorite faces or delete them. 1. Press the Fn button. Face List 2.
Shooting ( ) Face Tone Auto Focus type This menu lets you to control the skin tone in images in beauty shot mode. The higher the level you select, the brighter the skin tone. You can select your preferred Focus Area according to the shooting conditions. 1. Select [Face Tone] by pressing the Up/Down button. 2. Select a desired face tone by pressing the Left / Right button, and then press the OK button. 3. Press the Shutter button to capture an image.
Shooting ( ) Metering Photo Style Selector If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. You can add various effects to an image without using image editing software. Photo Style Selector [Multi] ( ) : Exposure is calculated based on an average of Metering the available light in the image area. However, the calculation is biased towards the center of the Back Move image area. This is suitable for general use.
Shooting ( ) Custom RGB : You can change the R (Red), G (Green) and B (Blue) values of the image. Smart Filter You can apply various filter effects to your photos to create unique images. Back Move Smart Filter - Up/Down button : Selects R, G, B - Left/Right button : Changes the values Back Move 1. Select the desired Smart Filter by pressing the Left/Right button, and then press the OK button. Back Move When you select any Photo style, Face detection is not available.
Shooting ( ) Image Adjust Saturation You can change the saturation of the image. Contrast You can change the contrast of the image. 1. Select [Contrast] by pressing the Up/Down button. 2. Change the contrast by pressing the Left/Right button. 3. Press the Shutter button to capture an image. 1. Select [Saturation] by pressing the Up/Down button. 2. Change the saturation by pressing the Left/Right button. 3. Press the Shutter button to capture an image.
Shooting ( ) ACB Drive mode The ACB function adjusts the contrast automatically when there are big differences in brightness between objects in the photo frame or between your subject and the surrounding environment. This lets you photograph subjects clearly. You can select single, continuous, motion capture, and AEB (Auto Exposure Bracketing). [Single] ( ) [Continuous] ( ACB Back Move - [ACB] Sub menus: [Off], [On].
Shooting ( ) Movie clip frame stabiliser DIS Digital Image Stabilization (DIS) This function helps minimize camera shake when capturing a still image. This function helps stabilize images captured during movie recording. You can select this menu only in the Movie clip mode. DIS Back Back Move Move [Off] ( ) : Disables the DIS function when capturing a still image. [Off] ( ) : Movie clip frame stabilizer function is off. [On] ( ) : Enables the DIS function when capturing a still image.
Shooting ( ) Voice Memo You can add your voice-over to a stored still image. (Max. 10 sec.) Voice Recording With Voice Recording, the camera can record a voice for as long as the available recording time allows (Max. 10 hours). Memo Back Move - Select Voice Memo in the menu. When the Voice Memo indicator is displayed on the LCD screen, the Voice Memo function is ready. Record Back Move Select Voice Recording in the menu. Press the shutter button to record a voice.
Shooting ( ) Pausing while recording a voice Recording a movie clip without voice Using this function, you can record your favorite voice clips into a voice recording file without having to create multiple voice recording files. You can record a movie without voice. Stop Record [Voice recording mode] 1. Press the OK button to pause recording. 2. Press the OK button again to resume the recording. 3. If you want to stop recording, press the shutter button again.
Sound menu In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except the Voice Recording mode. The items indicated by * are default settings. Ä Menus are subject to change without prior notice. Shutter sound You can select the shutter sound.
Sound ( ) Setup menu AF sound In this mode, you can set up the basic settings. You can use the setup menu in all camera modes, except the Voice Recording mode. The items indicated by * are default settings. Ä Menus are subject to change without prior notice. If you set the AF (Automatic Focus) sound to On, the camera plays the AF sound when you press the shutter button down half way.
Display ( ) Start up image Quick view You can select the image that is first displayed on the LCD screen whenever you turn on the camera. If you enable Quick View before capturing an image, you can view the image you just captured on the LCD screen for the time specified in the [Quick View] setup. You can use Quick view only with still images. - Sub menus : [Off]*, [Logo], [User Image] - Insert a saved image for the start-up image using [Start Image] in the [Resize] menu in play mode.
Settings ( ) Initialization The items indicated by * are default settings. Ä Menus are subject to change without prior notice. Initialization restores all camera menu and function settings to their default values. However, values for Date & Time, Language, and Video Out are not changed. Formatting a memory The [Format] function formats the camera’s memory. When you run [Format] all images, including protected images, are deleted.
Settings ( ) File name Setting up the Date / Time / Date type You can change the date and time that the camera displays on captured images and set up the date type. Setting [Time Zone] enables you to display the local date and time on the LCD screen when travelling overseas. - Date type : [yyyy/mm/dd], [mm/dd/yyyy], [dd/mm/yyyy], [Off]* Format Reset Date & Time :2010/01/01 yyyy mm dd Time Zone 2010No.
Settings ( ) Imprinting the recording date Auto power off There is an option to include Date & Time on still images. This function switches the camera off after a set amount of time to prevent unnecessary battery drainage. - Sub menus [Off]* : The Date & Time is not imprinted on the image file. [Date] : Only the Date is imprinted on the image file. [Date & Time] : The Date & Time is imprinted on the image file. Format Reset Date & Time :2010/01/01 Time Zone :London File No.
Settings ( ) Auto Focus lamp Selecting Video out type You can turn the Auto Focus lamp on and off. The Video output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (screen or TV, etc.) to which the camera is connected. PAL mode supports only PAL B, D, G, H, or I. - Sub menus [Off] : The AF lamp does not light up in low light conditions. [On]* : The AF lamp lights up in low light conditions.
Settings ( ) - NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc. - PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway etc. - When using a TV as an external screen, you need to select the external or AV channel of the TV. - There will be digital noise on the external screen, but it is not a malfunction.
Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( Î ). The camera can now play back the images stored on the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Playing back a still image 1. Select the Play mode by pressing the play mode button ( Î ). 2.
Starting play mode Movie clip capture function Playing back a recorded voice You can capture still images from the movie clip. 1. Select the recorded voice file that you want to play back by using the Left/Right button. 2. Press the OK button to play back a recorded voice file. Play - To pause a recorded voice file while playing it back, press the OK button again. - To resume playback of the voice file, press the OK button. - To rewind the voice file while it is playing, press the Left button.
Starting play mode LCD screen Indicator Playing back a voice memo The LCD screen displays shooting information about the displayed image. 1. Select a still image that has a voice memo. 2. Press the OK button to play back the voice memo. - To pause the voice memo while playing it back, press the OK button again. - To resume playback of the voice memo, press the OK button. Play Pause Ɣ Still images with voice memos display a microphone icon on the top left side. No.
Using the camera buttons to set the camera Thumbnail ( º ) / Enlargement ( í ) button In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Smart Album Play mode button If you have turned on the camera by pressing the POWER button, you can press the Play mode button once to switch to Play mode and press it again to switch to Recording mode. You can turn the power on with the Play mode button. The camera is turned on in play mode.
Thumbnail ( º ) / Enlargement ( í ) button Ŷ Smart Album Filter Ŷ To search for an image, follow these steps: 1. Press the MENU button in Smart Album mode. A list of categories appears on the left of the screen. 2. Use the Up/Down button to move up or down the list. 3. Press the OK button to select a category. The camera selects the images that fit the category, then displays them in the Smart Album format. 1. Press the Thumbnail button in Smart Album.
Thumbnail ( º ) / Enlargement ( í ) button Image enlargement 1. Select an image you want to enlarge, and then press the enlargement button. 2. Press the Digital Zoom button repeatedly to make the image larger. 3. Press the Up/Down/Left/Right sides of the 5 Function button to view different portions of the enlarged image. 4. Push the Thumbnail button repeatedly to decrease the size of the image.
Info (DISP) / Up button Play & Pause / OK button When the menu is displayed on the LCD screen, the Up (DISP) button operates as a direction button. When an image is displayed on the LCD screen, pressing the Up (DISP) button repeatedly displays image information on the LCD screen.
Left / Right / Down / MENU button Delete ( Õ ) button Left / Right / Down / MENU buttons activate the following. This deletes images stored in the memory. - Left button : While the menu is showing, the Left button operates as a direction button. While the menu is not showing, press the Left button to select the previous image. - Right button : While the menu is showing, the Right button operates as a direction button. While the menu is not showing, press the Right button to select the next image.
Setting the playback functions using the LCD Screen You can change Playback functions using menus displayed on the LCD screen. To display the Playback menus while in Playback mode, press the Menu button. To close the Playback menus, press the Play mode button or the Shutter button. The Playback menus are listed in the tables below.
Setting the playback PictBridge function using the LCD screen This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu Tab Main Menu Images Size ❹ Layout 72 Sub Menu Menu Tab Secondary Menu Page One Photo - All Photos - Auto - Postcard - Card - 4X6 - L - 2L - Letter - A4 - A3 - Auto - Full - 1 - 2 - 4 - 8 - 9 - 16 - Index - Main Menu Type p.
Edit ( ) Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the Play mode button. Resize 2. Press the Left/Right button to select an image. 3. Press the Menu button. 4. Press the Up/Down button (if necessary) to select Edit, and then press the OK Back Move button. 5. Press the Up/Down button (if necessary) to select Resize, and then press the OK button. 6.
Edit ( ) Rotating an image Photo Style Selector You can rotate stored images. You can apply various effects to your images by using this function. 1. Press the Play mode button. 2. Press the Left/Right button to select an image. 3. Press the Menu button. 4. Press the Up/Down button (if necessary) to Photo Style Selector select Edit, and then press the OK button. 5. Press the Up/Down button to select Photo Style Selector, and then press Back Move the OK button. 6.
Edit ( ) Custom RGB Smart Filter If you select the Custom RGB Photo Style, you can change the Red (R), Green (G), and Blue (B) values of an image. Apply various filter effects to your photos to create unique images. Back Move Back Move - OK button : Select / setup the Custom Color - Up / Down button : Selects R, G, B - Left / Right button : Change the R, G, or B value 1. Press the Play mode button. 2. Press the Left/Right button to select an image. 3. Press the Menu button. Smart Filter 4.
Edit ( ) Face Retouch Image Adjust 1. Press the Play mode button. 2. Press the Left/Right button to select an image. 3. Press the Menu button. 4. Press the Up/Down button (if necessary) to select Edit, and then press the OK button. 5. Press the Up/Down button to select Image Adjust, and then press the OK button. ACB You can automatically adjust the brightness of dark areas, caused by under exposure to the light exposure. 1. Select ( ) by pressing the Left/ Right button, and then press the OK button.
Edit ( ) Contrast control You can change the contrast of the image. 1. Select ( ) by pressing the Left/Right button, and then press the OK button. A bar for selecting the contrast will be appears. 2. Change the contrast by pressing the Left/Right button. 3. Press the OK button and the camera saves the image as a new file. Starting the Multi Slide Show ( Images can be displayed continuously at pre-set intervals. You can view the Multi Slide Show by connecting the camera to an external screen. 1.
Starting the Multi Slide Show ( ) Selecting Images You can select images to view in a slide show. Start 1. Use the Up / Down button to select the Images :All [Images] menu, and then press the All Interval :1 sec Date Right button. Music :Off Select Effect :Off 2. Select a desired sub menu by pressing the Up / Down button. [All] : All images saved on the Back Set Memory are played back. Press the OK button to save the configuration. [Date] : Images taken on a specified date are played back.
Starting the Multi Slide Show ( ) Setting play interval Setting Background Music To set the Multi Slide Show play interval: To set the Multi Slide Show music: 1. Select the [Interval] sub menu by pressing the Up / Down button, and then press the Right button. 2. Use the Up / Down button to select the desired interval. 3. Press the OK button to save the configuration.
File Options ( ) 1. Press the play mode button, and then press the menu button. 2. Press the Up / Down button, select the [File Options] menu tab, and then press the OK button. Deleting images The Delete function deletes unprotected images premanentiy. Before you run the Delete function, store all important shots on a computer. The startup image is stored on the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files in the memory.
File Options ( ) If you chose [All], the Protect All window appears. Select [Lock] to protect all images. Select [Unlock] to remove protection from all images. Press OK to complete the process. Voice memo Delete Protect Face List Edit Protect All? Voice memo Lock DPOF Unlock :Off You can add your voice to a stored still image.
File Options ( ) DPOF DPOF(Digital Print Order Format) allows you to embed printing information in your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. The DPOF indicator displays on the LCD screen when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs. This function is not available for Movie clips and Voice recording files.
File Options ( ) Index Images (except for movie clips and voice files) are printed as index type. 1. Press the Up / Down button, select the [DPOF] menu tab, and then press the Right button. 2. Select the [Index] menu, and then press the Right button again. Sub menu will appears. Delete Protect Face List Edit Setting Index? Voice memo Yes DPOF :Off No Copy to Card Back Set 3. Select [Yes] or [No] by pressing the Up / Down button. If [Yes] is selected : The image will be printed in index format.
File Options ( ) Copy to Card If there is not enough space available on the memory card to This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select the [Copy to Card] menu tab by pressing the Up / Down button, and then press the Right button. Delete Protect Face List Edit Voice memo :Off DPOF 2. Press the Up/ Down button to select Yes Copy to Card No [Yes] or [No], and then press the OK Back Set button.
PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. Connecting the camera to a Pictbridge compatible printer 1. Connect the camera to the printer with USB cable. 2. Once the camera is turned on, the camera automatically recognizes the printer and completes the connection. Ä If automatic connection fails, set the [USB] menu to [Printer]. (p.
PictBridge : Picture Selection PictBridge : Print Setting You can select the images you want to print. You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. Images :One Photo Setting the Number of Copies to Print One Photo Size All:Auto Photos 1. Press the MENU button and the Layout :Auto PictBridge menu appears. Type :Auto 2.
PictBridge : Reset Important notes Resets user-changed configurations. Be sure to observe the following precautions! 1. Use the Up / Down button to select the [Reset] menu tab, and then press the Right button. 2. Use the Up / Down button to select [Yes] or [No], and then press the OK button. Date :Auto File Name Reset :Auto No No Yes Back Set If [Yes] is selected : All print and image settings are reset. If [No] is selected : Settings are not reset.
Important notes Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture build-up can also occur on the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has evaporated.
Warning indicator There are several warnings that may appear on the LCD display. [Card Error] Memory card error. Turn off the camera power and turn it on again. Insert the memory card again. Insert and format the memory card. (p.58) [Card Locked] The memory card is locked. SD/SDHC memory card : Slide the write protect switch to the top of the memory card. [File Error] File error. Delete the file. Memory card error. Contact a camera service center.
Before contacting a service center Please check the following The camera doesn’t switch on. There is low battery capacity. Insert a fresh battery. (p.15) Charge the battery. Battery is inserted incorrectly with the polarities reversed. Insert the battery according to the polarity marks. (+, -) The camera power ceases while in use. The battery is exhausted. Insert a fresh battery. (p.15) Charge the battery. The Camera is turned off automatically. Turn on the camera power again.
Before contacting a service center The flash does not fire. Flash off mode has been selected. Disengage flash off mode. The camera mode can't use the flash . Refer to the FLASH instructions (p.35). Incorrect date and time is displayed. The date and time have been set incorrectly or the camera has adopted the default settings. Reset the date and time. The camera buttons do not operate. The camera has malfunctioned. Remove/re-insert battery and switch the camera on.
Specifications Image Sensor - Type : 1/2.33" CCD - Effective Pixel : Approx. 12.2 Mega-pixel - Total Pixel : Approx. 12.4 Mega-pixel Lens - Focal Length : SAMSUNG Lens f = 6.3 ~ 31.5mm (35mm film equivalent : 35 ~ 175mm) - F No. : F3.6(W) ~ F4.8(T) - Digital Zoom : ·Still Image mode :1.0X ~ 5.0X ·Play mode : 1.0X ~ 12.5X (depends on image size) Flash - Modes : Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off, Red Eye Fix - Range : Wide : 0.2m ~ 3.0m (ISO Auto), Tele : 0.5m ~ 2.
Specifications - Movie Clip ·With Audio or without Audio (user selectable) ·Recording time : max 20 min.
Specifications Power Source - Rechargeable battery : BP70A Ä Included battery may vary depending on sales region. Dimensions (WxHxD) - 93.8 x 61 x 18.5 mm (excluding protrusions) Weight - Approx. 121 g (without battery and card) Operating Temperature - 0 ~ 40°C Operating Humidity - 5 ~ 85% Software - Intelli-studio, Adobe Reader Specifications are subject to change without prior notice. All trademarks are the property of their respective owners.
Transferring files to your computer (for Windows) For Windows users Transfer files by connecting your camera to your PC. Installing programs Hardware and software requirements Item Requirements CPU Intel® Pentium®4 3.2 GHz or higher AMD Athlon™ FX 2.6 GHz or higher RAM 512 MB or more (1 GB or more recommended) OS Others Using a self-assembled PC or a PC and OS that are not supported may void your warranty. The programs may not work properly on 64-bit Edition of Windows XP, Vista, and 7.
Transferring files to your computer (for Windows) 1. Insert the installation CD into a compatible CD-ROM drive. 2. When the setup screen is displayed, click Samsung Digital Camera Installer to start installation. Transferring files to your PC Once you connect the camera to your PC, the camera will be recognized as a removable drive. The battery is be charged while the camera is connected to a PC with the USB cable. 1. Connect your camera to your PC with the USB cable. 3.
Transferring files to your computer (for Windows) 2. Turn on the camera. - The computer recognizes the camera automatically. If the camera fails to connect, a pop-up window will appear. Select Computer. 3. On your PC, select [My Computer ĺ Removable Disk ĺ DCIM ĺ 100PHOTO]. Disconnecting the camera (for Windows XP) The way to disconnect the USB cable for Windows Vista / 7 is similar. 1. If the status lamp on your camera is blinking, wait until it stops. 2. Click ( screen.
Transferring files to your computer (for Windows) Using Intelli-studio Once you have installed Intelli-studio on your PC, Intelli-studio starts automatically when a camera is connected to your PC. If Intelli-studio does not start after you have connected the camera to your PC, double-click the Intelli-studio icon on your Windows desktop. Intelli-studio allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube. For details, select [Menu ĺ Help] in the program.
Transferring files to your computer (for Windows) Icon Description Transferring files to your computer for Mac For Mac users When you connect the camera to a Macintosh computer, the computer will recognize the device automatically. You can transfer files directly from the camera to the computer without installing any programs.
Transferring files to your computer for Mac 1. Connect your camera to a Macintosh computer with the USB cable. You must plug the end of the cable with the indicator light (Ÿ) into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data. 2. Turn on the camera. - The computer recognizes the camera automatically and a removable disk icon will be displayed. 3. Double-click the removable disk icon. 4. Transfer photos or videos to the computer.
FAQ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. Case 2 The camera is not recognized by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer. Turn the camera power off and on again.
FAQ If a movie clip doesn’t play back on your PC Ä When a the movie clip recorded by the camera doesn’t play back on your PC, the problem is most likely caused by the video codec installed on the PC. If DirectX 9.0c or later is not installed Install DirectX 9.0c or later. 1) Insert the CD provided with the camera 2) Run Windows Explorer. Select the [CD-ROM drive:\ DirectX] folder, and then click the DXSETUP.exe file. Windows installs DirectX.
FCC notice NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
