User Manual
Instructions Getting to know your camera Use this camera in the following order. Set up the Software Take a picture To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. (p.96~97) Take a picture. (p.20) Thank you for buying a Samsung Digital Camera. Prior to using this camera, please read the user manual thoroughly.
DANGER WARNING DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre.
CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or burst battery could result in fire or injury. – Use battery with the correct specification for the camera. – Do not short circuit, heat or dispose of battery in fire. – Do not insert the battery with the polarities reversed. Remove the battery when not planning to use the camera for a long period of time.
Contents 027 028 029 029 031 Things to watch out for when taking pictures Focus lock Using the camera buttons to set the camera POWER button Shutter button Zoom W/T Lever Command Lever 032 033 035 037 039 040 Function Description / Info / Up button Macro / Down button Flash / Left button Self-timer / Right button MENU / OK button Fn button 041 041 042 042 043 044 044 045 045 046 048 049 Fn button: Size Focus Area Fn button: Frame rate Fn button: Metering Fn button: Drive mode Fn button: ISO Fn button:
Contents 062 063 063 063 064 065 065 066 066 066 067 067 067 067 068 SETUP Play & Pause / Down button Left / Right / MENU / OK button Print button Delete button E (Effect) button: Resize E (Effect) button: Rotating an image E (Effect) button: Colour E (Effect) button: Image editing ACB Red eye removal Face Retouch Brightness control Contrast control Saturation control Noise effect 068 Using the remote control in play mode 069 070 Setting up the play back function using the LCD monitor Starting the sli
Contents PRINT 091 092 092 093 PictBridge PictBridge: Picture Selection PictBridge: Print Setting PictBridge: Reset SOFTWARE 093 Software notes 095 096 098 100 101 104 104 About the software Setting up the application software Starting PC mode Removing the removable disk Samsung Master Setting up the USB Driver for MAC Using the USB Driver for MAC 105 107 109 110 112 115 Specifications Important notes Warning indicator Before contacting a service centre FAQ FCC notice APPENDIX 006 094 094 Syste
Package Contents Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Parts and accessories illustrated below may differ from exact appearance.
Identification of features Front & Top Zoom T Lever (Digital zoom) Mode dial Zoom W Lever (Thumbnail) POWER button Flash AF sensor/ Self-timer lamp Speaker Microphone Remote control sensor Lens HDMI connection terminal HDMI connection terminal note To connect to the HDMI connection terminal, use the HDMI cable only.
Identification of features Back Shutter button Camera status lamp LCD monitor Command Lever Fn / Delete button USB / AV / DC terminal 5-function button Play mode / Print button E (Effect) button Camera strap 009
Identification of features Bottom 5 Function button Memory card slot Function Description / Information / Up button Flash / Left button Self-timer / Right button MENU / OK button Battery holder Battery chamber cover Tripod socket 010 Battery chamber Macro /Play & Pause / Down button
Identification of features Self-timer lamp Icon Status Description Blinking – For the first 7 seconds, the lamp blinks at 1 second intervals. – For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Connecting to a power source You should use the rechargeable battery SLB-10A supplied with the camera. Be sure to charge the battery before using the camera. SLB-10A rechargeable battery Specification Movie Model SLB-10A Type Lithium Ion Capacity 1050mAh Voltage 3.7V Charging time (When the camera is turned off) Approx. 180MIN Number of images and battery life: Using the SLB-10A Still image 012 Recording time Battery life /Number of images Conditions Approx. 140 MIN/ Approx.
Connecting to a power source Connecting the AC adapter with the USB cable can be used as an AC cable, and you can charge the rechargeable battery with the AC cable. Using an AC cable: Connect the AC adapter to the USB cable. It can be used as a power cable. Important information about USB cable usage. Use a USB cable with the correct specification. If the camera is connected to the PC through a USB hub: connect the camera directly to the PC.
Connecting to a power source How to charge the rechargeable battery Charging LED of the AC Adapter Charging LED Before inserting any cables or AC adapter, check the directions and do not insert using force. It may cause breakage of cable or camera. If the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly. If you charge the battery with the camera power on, the battery can’t charge fully.
Inserting the battery Inserting the memory card Insert the battery as shown. Insert the memory card as shown. – If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+/-). – When the battery chamber cover is opened, do not force it. This may cause damage to the battery chamber cover. - Turn off the camera’s power before inserting the memory card.
Instructions on how to use the memory card Be sure to format the memory card (see p.84) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Instructions on how to use the memory card The camera can use SD/ SDHC Memory Cards and MMC (Multi Media Cards). When using a 1GB SD memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.
When using the camera for the first time Charge the rechargeable battery fully before using the camera for the first time. When the camera is turned on for the first time, a menu will be displayed in the LCD monitor to set date, time and language. This menu will not be displayed again after setting up the date, time and language. Set up the date, time and language before using this camera. Setting up the language Setting up the date, time and date type 1.
LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. 1 1 X5.0 ) ( 23 a 1/30 F3.
Starting the Recording mode Selecting modes How to use the Auto mode You can select the shooting modes by using the mode dial on the upper of your camera. Select this mode for quick and easy picture taking with minimal user interaction. How to use the mode dial Select the shooting mode by turning the mode dial to the selection point. Movie Clip mode Smart Auto mode Scene mode Select point Beauty Shot mode Auto mode DUAL IS(Dual Image Stabilization) mode Program mode Manual mode 020 1.
Starting the Recording mode How to use the Program mode How to use the DUAL IS(Dual Image Stabilization) mode Selecting the automatic mode will configure the camera with optimal settings and you can manually configure various functions. This mode will reduce the effect of camera shake and help you get a well exposed image in dim conditions. 1. Select the Program mode by using the Mode dial. (p.20) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3.
Starting the Recording mode How to use the Beauty Shot mode How to use the Scene modes Take a photo of portraits by setting options to clear facial imperfections. Use the menu to easily configure optimal settings for a variety of shooting situations. (p. 56) 1. Select the Beauty Shot mode by using the Mode dial. (p.20) 1 1. Select the Scene mode by using the Mode dial. (p.20) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3.
Starting the Recording mode The scene modes are listed below. (p.56) Icons Scene modes How to use the [Frame Guide] mode Description Frame Guide Use this mode when you want someone else to take a picture for you from the angle you choose. Night Use this for shooting still images at night or in other dark conditions. Portrait Selecting the portrait mode will configure the camera with optimal settings for portrait photography. Children To take a picture of fast moving objects, for example, children.
Starting the Recording mode How to use the Movie clip mode Recording HD (High Definition) movie clips A movie clip can be recorded for as long as the available recording time(maximum of 29 minutes) of the memory capacity allows. You can record HD (High Definition) movie clips. (1280X720, 30 fps) H.264(MPEG4.AVC) is a standard for the digital video codec. It supports a high quality movie clip in a small file size. 1. Select the Movie clip mode by using 00:01:01 the Mode dial. (p.20) 2.
Starting the Recording mode Recording the movie clip without sound Pausing while recording a movie clip (Successive Recording) You can record the movie clip without sound. This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips. Steps from 1-3 are the same as those for Movie clip mode. 4. Press the MENU button. 5.
Starting the Recording mode How to use the Smart Auto mode Each scene is recognized in the following conditions; The camera automatically chooses the appropriate camera settings based on a detected type of scene. It will be helpful if you are not familiar with the camera settings for various scenes. [Landscape] 1. Select Smart Auto mode by using the Mode dial. (p.20) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the Shutter button to capture an image.
Things to watch out for when taking pictures Pressing the Shutter button down half way. Lightly press the Shutter button to confirm focus and flash battery charge. Press the Shutter button all way down to take the picture. The available memory capacity may vary depending on shooting conditions and camera settings.
Focus lock To focus on a subject not positioned in the centre of the picture, use the focus lock function. The recording mode function can be set up by using the camera buttons. Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the Shutter button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject. Be careful not to press the Shutter button all the way down to avoid taking an unwanted picture. 3.
Shutter button Zoom W/T Lever Used for taking an image or recording voice in the Recording mode. When the menu window is not displayed, this lever is used to control the optical or digital zoom. This camera has a 10X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 50X. In Movie clip mode Pressing the Shutter button down fully starts the process for recording a movie clip.
Zoom W/T Lever WIDE Zoom Optical zoom WIDE: Move the Zoom W/T lever to the left in optical zoom mode to see subjects in the distance. Continue to move the Zoom W/T lever to the left to disable optical zoom. 1 1 1 Digital zoom WIDE: Move the Zoom W/T lever to the left in digital zoom mode to enable digital zoom (software wide). Stop moving the Zoom W/T lever to stop X 5.0 the operation of digital zoom.
Command Lever How to use the Command lever mode Exposure compensation This product automatically controls exposure, adjusting it according to the recording situation. However, use the command lever to change the exposure to a different value. 1. Select [EV] under [Command Lever] in the menu. 2. Press the command lever to the left or right from the menu to set the desired exposure value. For detailed information on setting the command lever, refer to Page 52.
) / Up button While the menu is showing, the Up button operates as a direction button. If the menu screen does not appear, information or function descriptions of the current filming image (filming mode) can be accessed through the liquid crystal monitor by pressing the Function description / Information ( ) button. 1 Display every piece of information about shooting. 1 Display the basic information.
Macro ( ) / Down button While the menu is showing, press the Down button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can use the Macro( )/Down button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator appears on the LCD monitor.
Macro ( ) / Down button Types of focus mode and focus range (W: Wide, T: Tele) Available focusing method, by Recording mode (Unit: cm) Mode Auto ( Focus Type Focus range ) W: 5 ~ Infinity T: 100 ~ Infinity Macro ( Focus range W: 5 ~ 50 T: 100 ~ 200 ) Mode ) W: 5 ~ Infinity T: 100 ~ Infinity ) DUAL IS ( Auto macro ( Focus range W: 5 ~ Infinity T: 100 ~ Infinity ) Macro Normal Auto macro SCENE Macro Manual focus Normal ) Manual focus ( Focus Type Manual focus W: 50 ~ Infinity T: 20
Flash ( ) / Left button When the menu is displayed on the LCD monitor, pressing the Left button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the Flash( )/Left button operates as the Flash( ) button. Selecting the flash mode 1. Select a desired Recording mode, except the [Movie] mode and the [DUAL IS] mode. (p.20) 2. Press the Flash button until the desired flash mode indicator is displayed on the LCD monitor. 3.
Flash ( ) / Left button Flash mode indicator Icon Flash mode Auto flash Available flash mode, by Recording mode Description If the subject or background is dark, the camera flash will operate automatically. Auto & Red-eye reduction If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function. Fill in flash The flash fires regardless of the available light.
Self-timer ( ) / Right button When the menu is displayed on the LCD monitor, pressing the Self-timer ( ) / Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the Self-timer ( ) / Right button operates as the Self-timer ( ) button. This function is used when the photographer would also like to be in the image. If you operate the Self-timer( ) button during the self-timer operation, the self-timer function is cancelled.
Self-timer ( ) / Right button Motion Timer Motion Icon & Self-timer lamp Pressing the Shutter button after setting the Motion Timer Blink (1 second interval) Detecting the subject’s movement Blink (0.25 second interval) No movement is detected Turn on and the image is taken after 2 seconds. The Motion Timer flows are as follows. (with the exception of [Movie] and [Frame Guide] modes) Selecting the Motion Timer Pressing the Shutter button Confirming the composition (Within 6 sec.
Self-timer ( ) / Right button Remote control range When you take a picture by using the remote control, refer to the illustrations shown alongside about the remote control range. [Shutter button on the remote control] MENU / OK button MENU button – When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display.
Fn button How to use the Fn menu You can use the Fn button to set the following menus. ( : Selectable) Page SIZE p.41 FOCUS AREA p.41 FRAME RATE p.42 METERING p.42 DRIVE p.43 ISO p.44 WHITE BALANCE p.44~ 45 Aperture Value/ Shutter Speed p.45 FACE DETECTION p.46~ 47 Up/Down button SIZE Center AF Selectable menu may differ depending on each scene mode. 040 1. Press the Fn button in an available mode. - Press the Fn button twice in some modes. 2.
Fn button: Size Focus Area You can select the image size appropriate for your application. You can select your preferred Focus Area according to the shooting conditions.
Fn button: Frame rate Fn button: Metering This menu allows you to select an appropriate frame rate depending on the intended use for a recorded video. Using a faster shutter speed enables the movie clip to catch a decisive moment, but which will raise the file size. If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. Mode 30 FPS Movie clip mode Icon Icon Sub menu 60 FPS 30 FPS 15 FPS File Format H.264 H.264 H.
Fn button: Drive mode You can select continuous shot, and AEB (Auto Exposure Bracketing). Single Icon Drive Mode Single Description Take one picture only. Continuous Images will be taken continuously until the Shutter button is released. The shooting capacity depends on the memory. High Speed Continuous shooting is available while pressing and holding the Shutter button (About 1.5 frames per second). The shooting speed may get slower depending on the shooting environment or the number of shots.
Fn button: ISO Fn button: White balance You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. The white balance control allows you to adjust the colours to appear more natural. Auto Auto WB Icon ISO Mode Description Auto The camera’s sensitivity is automatically changed by variables such as lighting value or subject brightness.
Fn button: White balance Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1. Select the [Measure: SH] ( ) menu of the White Balance and place a sheet of white paper in front of the camera so that the LCD monitor shows only white. 2. MENU/OK button: Selects previous custom white balance.
Fn button: Face Detection If you use face detection options, your camera can detect a human face. When focusing on a human face, the brightness of the face is also adjusted. You can also capture natural facial expressions by using self portrait, smile shot or blink detection.
Fn button: Face Detection Self Portrait Smile Shot When taking pictures of yourself, the area of your face is automatically detected so that you can take self portraits more easily and quickly. 1. For self-filming, set the camera lens towards the face of the object. It automatically detects the face of the object, and emits a guiding sound. 1 - When locating the face in the center of the screen, it repeatedly emits a faster sound unlike the sounds that are emitted when the face is not in the center. 2.
E (Effect) button It is possible to add special effects to your images by using this button. Available Effects, by recording mode Mode 048 E button ( : Selectable) Mode E button The E button will not operate in Voice recording mode, [Smart Auto], [Beauty Shot] and some [Scene] modes ([Frame Guide], [Night], [Text], [Sunset], [Dawn], [Backlight], [Firework], [Beach&Snow], [Self-Shot], [Food], [Café]). Even if the camera is turned off, the effect setting will be preserved.
E (Effect) button: Photo Style Selector E (Effect) button: Image editing You can add various effects to the image without an image editing software. Press the E button in an available mode. 1. Select the desired Photo style selector by pressing the Left/Right button and press the OK button. 2. Press the Shutter button to take an image. Vivid OK Set Icon Style mode Normal E Back Description No style effect is added to the image. Vivid The image will be applied with vivid colours.
E (Effect) button: Image editing Custom colour: You can change the R (Red), G (Green) and B (Blue) values of the image. Contrast Color Move – Up/Down button: Selects R, G, B – Left/Right button: Changes the values OK Set Color Move OK Set Sharpness 050 Sharpness Move OK Set Contrast Move OK Set Saturation 1. Select the Saturation( ) menu by pressing the Up/Down button and a bar for selecting the saturation will be displayed. 2. Change the saturation by pressing the Left/Right button.
Using the LCD monitor to adjust the camera settings You can use the menu on the LCD monitor to set up recording functions. The items indicated by Menu Command Lever Flash EVC are default settings. Sub menu Available mode EV EV(A, S) ISO WB Voice Page p.52 +1.0, +0.5, 0, -0.5, -1.0 Super Fine Fine Normal - ACB Off On OIS Off On Quality Menu Scene p.
Command Lever You can enable the desired features for the command lever on the back of the camera. Flash Intensity RECORDING Command Lever Flash EVC Quality ACB OIS Voice Memo EV ISO WB - [Command Lever] Sub menus: [EV], [EV(A, S)], [ISO], [WB] - Move the command lever to the left OK Set Back or right to select the submenu for each feature. For detailed information on using the command lever, refer to Page 31. The [Command Lever] feature is enabled in [Program], [Manual], [DUAL IS], or [Movie] mode.
Quality ACB You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. This function is to adjust the contrast automatically when taking photos in an environment with big exposure difference i.e. backlight or contrast. This function adjusts the brightness automatically and allows the subject to be photographed clearly.
OIS (Optical image Stabilization) Voice Memo This feature allows you to minimize camera shake while taking a picture. You can add your voice-over to a stored still image. (Max. 10 sec.) - [OIS] Sub menus: [Off], [On] RECORDING Command Lever Flash EVC Quality ACB OIS Voice Memo Back Back Off On OK Set – If the voice memo indicator is displayed on the LCD monitor, the setting is completed. Off On OK Set 1 OIS function may not work sufficiently in the following cases.
Voice recording A voice can be recorded for as long as the available recording time (Max. 10 hour) allows. Press the Shutter button to record a voice. – Press the Shutter button once and voice is recorded for as long as the available recording time (max:10 hour) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the Shutter button is released. – If you wish to stop recording, press the Shutter button again. – File type: *.
Recording the movie clip without voice Starting play mode You can record the movie without voice. Turn the camera on and select Play mode by pressing the Play mode ( ) button. The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Select [Voice] menu in the Movie clip mode. (p.
Starting play mode Playing back a movie clip 1. Select the recorded movie clip that 100-0010 you want to play back by using the Left/Right button. 2. Press the Play & Pause ( ) button to playback a movie clip file. – To pause a movie clip file while 00:00:05 ◄REW playing it back, press the Play & Pause ) button again. Pause ( ) – Pressing the Play & Pause ( button again will cause the movie clip file to restart. – To rewind the movie clip while it is playing, press the Left button.
Starting play mode On camera movie trimming You can extract desired frames of movie clip during the movie clip play back. If the running time is under 10 seconds, the movie clip can’t be trimmed. Playing back a recorded voice 100-0010 1. Press the Play & Pause ( ) button 00:00:08 at the point of the movie clip where you T Trim E Capture want to start extracting. 100-0017 2. Press the Zoom T Lever. 3. Press the Play & Pause ( ) button and the extracted range will be displayed on the status bar. 4.
Starting play mode LCD monitor Indicator Playing back a voice memo The LCD monitor displays shooting information about the displayed image. 1 2 3 4 1. Select a still image that has the voice memo. 2. Press the Play & Pause ( ) button to play back the voice memo. – To pause the voice memo, while playing it back, press the Play & Pause ( ) button again. – To resume playback of the voice memo, press the Play & Pause ( ) button.
Using the camera buttons to set the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Play mode button Thumbnail ( ) / Digital Zoom ( ) Lever You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. Thumbnail display If you have turned on the camera by pressing the POWER button, you can press the Play mode button once to switch to Play mode and press it again to switch to Recording mode.
Using the camera buttons to set the camera Image enlargement The maximum enlargement rate in proportion to the image size 1. Select the picture you want to enlarge and move the Digital Zoom lever to the right. Then the selected picture will be digitally enlarged. 2. Different parts of the image can be viewed by pressing the 5 function button. Image size Maximum X12.5 enlargement rate x 2.1 3. Move the Thumbnail lever to the left to return the enlarged picture to its original size.
Info ( ) / Up button Play & Pause ( When the menu is displayed on the LCD monitor, the Up button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info( ) button will display image information on the LCD monitor. 100-0010 Info ( ) button ) / Down button In Play mode, the Play & Pause ( follows: – If the menu is displayed Press the Down button to move from the main menu to a sub menu, or to move down the sub menu cursor.
Left / Right / MENU / OK button Delete ( ) button Left/Right/MENU/OK button activate the following. This deletes images stored on the memory card. By activating the Recycle Bin function (p.85) you can restore deleted photos. – Left button: While the menu is showing, the Left button operates as a direction button. While the menu is not showing, press the Left button to select the previous image. – Right button: While the menu is showing, the Right button operates as a direction button.
E (Effect) button: Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the Play mode button and press the E button. 2. Press the Left/Right button and select the [RESIZE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up/Down button and press the OK button. Image Resize Types 064 – A large sized image can be resized to a smaller sized image, but not vice versa. – Only JPEG images can be resized.
E (Effect) button: Rotating an image E (Effect) button: Colour You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. It is possible to add colour effects to your images by using this button. ROTATE 1 Press the Play mode button and press the E button. 1. Press the Play mode button and press E Exit Move the E button. 2. Press the Left/Right button and select the [ROTATE] ( ) menu tab. 3.
E (Effect) button: Colour E (Effect) button: Image editing 1. Press the Play button and press the E button. Custom colour You can change the R(Red), G(Green) and B(Blue) values of the image. 2. Select ( Custom Color ◄► – OK button: Selects / sets up the Custom Colour – Up/Down button: Selects R, G, B – Left/Right button: Changes the values Move ACB OK Set Move You can automatically adjust the brightness of the dark area, caused by under exposure to the light source. 1.
E (Effect) button: Image editing Face Retouch When you recorded a person, you can retouch the subject’s face. 1. Select ( ) by pressing the Up/Down button and a bar for selecting the [Face Retouch] will be displayed. 2. Change the Face Retouch by pressing the Left/Right button. 3. Press the OK button and the image will be saved as a new file name. Contrast control You can change the contrast of the image. Face Retouch OK Set E Back Brightness control You can change the brightness of the image. 1.
E (Effect) button: Image editing Using the remote control in play mode Noise effect You can play the movie clip and images by remote control. You can add noise to an image to add a more classic feel to your photo. 1. Select ( ) by pressing the Up/Down button and press the OK button. 2 The [Processing!] message is displayed and the image is saved as a new file name Button for moving up : Move to the previous thumbnail page.
Setting up the play back function using the LCD monitor Play mode functions can be changed by using the LCD monitor. In the Play mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the Play mode button or Shutter button. Menu Tab Main Menu Sub Menu Sub Menu Page Show Start Play/Repeat Play - p.
Setting up the play back function using the LCD monitor Menu Tab Main Menu Type Quality Date Print File Name Reset Sub Menu Sub Menu Auto - Plain - Photo - FastPhoto - Auto - Draft - Normal - Fine - Auto - Off - On - Auto - Off - On - No - Yes - Menus are subject to change without prior notice. 070 Starting the slide show ( ) Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor.
Starting the slide show ( ) Selecting Images Configure slide show effects You can select image to view. Unique screen effects can be used for the slide show. 1 Use the Up/Down button to select the [Images] menu and press the Right MULTI SLIDE SHOW Show Start button. All Images 2. Select a desired sub menu by pressing Smart Album Effect Interval the Up/Down button. Music [All]: All images saved in the Memory are played back.
Starting the slide show ( ) Setting play interval Setting Background Music Set the slide show play interval. Set the slide show music. 1. Select the [Interval] sub menu by pressing the Up/Down button and press the Right button. 2. Use the Up/Down button to select the desired interval. 3. Press the OK button to save the configuration. MULTI SLIDE SHOW Show Start Images 1sec Effect 3sec Interval 5sec Music 10sec Back OK Set The loading time depends on the image size and quality.
Playback ( ) Voice memo Smart Album You can add your voice to a stored still image. You can easily categorize or search a large amount of content such as pictures and videos. 100-0010 PLAYBACK Voice Memo Smart Album Protect Delete DPOF Copy To Card Back 100-0010 Off On 00:00:06 OK Set Start : Shutter SH Stop – Once you press the shutter button, the voice will record for 10 seconds. – To stop the recording, press the Shutter button.
Playback ( ) Searching or Deleting Files Details of Each Category Category Description Date Categorized depending on the sequence of recorded dates. Colour Categorized depending on the main color. Week Categorized depending on the sequence of recorded weeks. Type Categorized depending on the file type (e.g., picture, video, or voice) File Format Pictures, Videos, voice 1. Move the Thumbnail lever to the left in the Smart Album window. 2.
Playback ( ) Protecting images This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). 1. Press the Up/Down button and select the [Protect] menu tab. And then press the Right button. 2. Select a desired sub menu by pressing the Up/Down button and press the OK button. PLAYBACK Voice Memo Smart Album Protect Delete DPOF Copy To Card – If you protect an image, the protect icon will be displayed on the LCD monitor.
Playback ( ) Deleting images 3. After deletion, the screen will be changed to the play mode screen. This deletes images stored on the memory card. By activating the Recycle Bin function (p.85) you can restore deleted photos. 1. Press the Up/Down button and select the [Delete] menu tab. And then press the Right button. 2. Select a desired sub menu by pressing the Up/Down button and press the OK button. [Select]: Selection window for an image to delete is displayed.
Playback ( ) Standard This function allows you to embed printing quantity information on a stored image. 1. Press the Up/Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button again and [Standard] sub menu will be displayed. Index PLAYBACK Standard Index Size [All Pics]: Configure number of prints for all pictures except movie and voice files. – Zoom T/W Lever: Select a number of prints. [Cancel]: Cancel the print setup.
Playback ( ) Print size You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. 1. Press the Up/Down button and select the [DPOF] menu tab. And then press PLAYBACK Select Standard the Right button. All Pics Index 2. Press the Right button again and select Size Cancel the [Size] sub menu will be displayed. 3. Select a desired sub menu by pressing the Up/Down button and press the OK OK Set Back button.
Playback ( ) Copy To Card This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select the [Copy To Card] menu tab by pressing the Up/Down button. And then PLAYBACK Voice Memo press the Right button. Smart Album 2. Select a desired sub menu by pressing Protect Delete the Up/Down button and press the OK No DPOF button. Yes Copy To Card – [No]: Cancels [Copy To Card].
Sound menu In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice recording mode. You can select the sound that is activated whenever the camera is turned on. The menus marked * are set to the default value. Menus are subject to change without prior notice.
Sound ( ) Beep Sound If you set sound to on, various sounds will be activated for camera startup, when OK button is pressed, so that you can be aware of the camera operation status. – [Beep Sound] sub menus: Self Portrait SOUND Volume Start Sound Shutter Sound Beep Sound AF Sound Self-Portrait Back Off Sound 1 Sound 2 Sound 3 OK Set This feature automatically detects the location of the face and optimises the camera settings to ensure a great self portrait.
Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice recording mode. Setting the Grid Line You can set the type of grid displayed on the histogram/grid window. (p. 32) The menus marked * are set to the default value. Menus are subject to change without prior notice.
Display ( ) Setting up the Date / Time / Date type Start up image You can change the date and time that will be displayed on the captured images and set up the date type. If [World Time] is set in foreign countries, the date and time of the destination will be displayed on the LCD monitor. You can select the image that is first displayed on the LCD monitor whenever the camera is turned on.
Display ( ) Settings ( ) Quick view Formatting a memory If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. DISPLAY Language Grid Line Date&Time Start Image Display Bright Quick View Back Off 0.5sec 1sec 3sec OK Set – Sub menus [Off]: The quick view function can’t be activated. [0.
Settings ( ) Initialisation All camera menu and function settings will be restored to their default values. However, values for Date/Time, Language, and Video will not be changed. Recycle Bin SETTINGS Format Reset Recycle Bin File Imprint Power Off No Yes – Sub menus OK Set Back [No]*: Settings will not be restored to their defaults. [Yes]: A window to confirm the selection is displayed. Select the [Yes] menu and all settings will be restored to their defaults.
Settings ( ) Imprinting the recording date File name This function allows the user to select the file naming format. SETTINGS Format Reset Recycle Bin File Imprint Power Off Back File name There is an option to include DATE/TIME on still images. Reset Series OK Set Description Reset After using the reset function, the next file name will be set from 0001 even after formatting, deleting all or inserting a new memory card.
Settings ( ) Auto power off This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. Selecting video out type SETTINGS Format Reset Recycle Bin File Imprint Power Off Off 1min – Sub menus 3min [Off]: Do not want to use the Power Off 5min 10min function. OK Set Back [1min], [3min]*, [5min], [10min]: The power will turn off automatically if not used for the period of time specified.
Settings ( ) Auto focus lamp Yellow - Video White - Sound – When using a TV as an external monitor, you will need to select the external or AV channel of the TV. – There will be a digital noise on the external monitor, but it is not a malfunction. – If the image is not in the centre of the screen, use the TV controls to centre it. – When the camera is connected to an external monitor, some parts of the image may not be displayed.
Settings ( ) ■ How to connect the camera with the HDTV HDMI Size When the camera is connected with the HDTV, you can select image size that is compatible with the HDTV. The image size are [1080i], [720p], [480p] and [576p]. Only when [480p] is set to [NTSC] and [576p] is set to [PAL], those resolutions can be set in the menu. Connect the HDMI cable to the HDMI port of both the camera and HDTV.
Anynet+(CEC) Anynet+(CEC) is an AV network system which controls all your connected SAMSUNG AV devices when using the TV remote control that supports Anynet+. When connected to the SAMSUNG HDTV, you can operate the playback functions by using the camera or the TV remote control. For more information about connecting the HDTV by using the HDMI cable, see page 89. In order to use the Anynet+(CEC) feature, the Anynet+ option under the camera’s [Settings] menu must first be activated. (p.
PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. ■ Connecting the Camera to a Printer Setting up the camera for connection to the printer 1. Connect the camera and printer with USB cable. 2. Once the camera is turned on, the camera automatically recognizes the printer and is connected to it. If automatic connection fails, set the [USB] menu to [Printer].
PictBridge: Picture Selection PictBridge: Print Setting You can select images you want to print. You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. Setting the Number of Copies to Print 1. Press the MENU button and the PictBridge menu will be displayed. PICTBRIDGE One Pic Images 2. Use the Up/Down button to select the All Pics Size [Images] menu and press the Right Layout button. Type Quality 3.
PictBridge: Reset Software notes Initialises user-changed configurations. Please ensure that you read the instruction manual carefully before use. 1. Use the Up/Down button to select the [Reset] menu tab. And then press the Right button. 2. Use the Up/Down button to select the desired sub menu value, and then press the OK button. PICTBRIDGE Layout Type Quality Date Print File Name Reset Back No Yes OK Set If [No] is selected: Settings will not be reset.
Software notes System requirements For Windows PC with processor better than Pentium III 500MHz (Pentium III 800MHz USB support recommended) environment Windows 2000 / XP / Vista Minimum 256MB RAM (Over 512MB recommended) For Macintosh Power Mac G3 or later, or Intel Processor Mac OS 10.
About the software After inserting the CD-ROM provided with this camera into the CDROM drive, the following window should automatically run. Samsung Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie files with this software. It does not support H.264(MPEG4.AVC) movie clip. This software is only compatible with Windows.
Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. You can visit the Samsung web-site through the internet. http://www.samsung.com: English 1. The auto run frame display. Click the [Samsung Camera Installer] menu in the Auto run frame. will Digital 2. Install the DirectX by selecting a button shown on the monitor.
Setting up the application software 4. Install the QuickTime Player 7.5 in the order shown. 5. After restarting the computer, connect the PC to the camera with the USB cable. 6. Turn on the camera power. The [Found New Hardware Wizard] will open and the computer will recognise the camera. If your OS is Windows XP / Vista, an image viewer program will open. QuickTime Player 7.5 cannot be installed under Window 2000.
Starting PC mode If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to “computer connection mode”. In this mode, you can download stored images to your PC through the USB cable. Connecting the camera to a PC Camera settings for connection 1. Turn on the camera 2. Connect the camera and computer with the supplied USB cable. 3. Once the camera is turned on, the camera automatically recognizes the PC and is connected to it.
Starting PC mode Downloading stored images You can download the still images stored on the camera to your PC’s hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer’s desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM]. The image files will then be displayed. 5. Click a folder where you want to paste the file. 6. Press the right mouse button and a pop-up menu will open. Click [Paste].
Removing the removable disk Windows 2000/XP/Vista (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Double-click the [Unplug or Eject Hardware] icon on the task bar. Double-click! 3. The [Unplug or Eject Hardware] window will open. Select the [USB Mass Storage Device] and click the [Stop] button. 4.
Samsung Master You can download, view, edit and save your images and movies with this software. It does not support H.264(MPEG4.AVC) movie clip. This software is only compatible with Windows. To run the Samsung Master, double click the Samsung Master icon on the desktop. Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. – To download the captured images, select the [Select All] button.
Samsung Master Image viewer: You can view the stored images. – Image viewer functions are listed below. 1 Menu bar: You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. 2 Image selection window: You can select the desired images in this window. 3 Media type selection menu: You can select image viewer, image edit and movie edit functions in this menu. 4 Preview window: You can preview an image or a movie clip and check the multi media information.
Samsung Master Movie edit: You can get the still image, movie clip, narration, music files together in a movie clip. Some movie clips that were compressed with a codec that is not compatible with the Samsung Master cannot be played back. Refer to the [Help] menu in Samsung Master for further information. Samsung Master does not support the playback and editing for the H.264(MPEG4.AVC) movie clip. – Movie clip edit functions are listed below. 1 Edit menu:You can select the following menus.
Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.3 or later. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. 104 Using the USB Driver for MAC 1. Double click a new icon on the desktop and the folder in the memory will be displayed.
Specifications Image Sensor – Type: 1/2.33” CCD – Effective Pixel: Approx. 12.2 Mega-pixel – Total Pixel: Approx. 12.4 Mega-pixel Lens – Focal Length: Schneider lens f = 4.2 ~ 42.0 mm (35mm film equivalent: 24 ~ 240 mm) – F No.: F3.3(W) ~ F5.8(T) – Digital Zoom: Still Image mode: 1.0X ~ 5.0X Play mode: 1.0X ~ 12.5X (depends on image size) Shake Reduction – Dual IS (OIS + DIS) * OIS (Optical Image Stabilization), DIS (Digital Image Stabilization) LCD Monitor – 3.
Specifications – Movie Clip • With Audio or without Audio (user selectable, recording time : Memory capacity dependent, max 29min.
Specifications Interface Power Source – Digital output connector: USB 2.0 High Speed 20 pin connector – Audio: Stereo(Microphone), Mono(Speaker) – Video output: NTSC, PAL (user selectable) – HDMI 1.2: NTSC, PAL (user selectable) – Rechargeable battery: SLB-10A, 3.7V (1,050mAh) – DC Adapter: 4.2V, 20 pin connector Included battery may vary depending on sales region. Important notes Be sure to observe the following precautions! This unit contains precision electronic components.
Important notes – This camera is not waterproof. To avoid dangerous electrical shocks, never hold or operate the camera with wet hands. – If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit. Extremes in temperature may cause problems. – If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry.
Warning indicator There are several warnings that may appear on the LCD display. [ Card Error ! ] • Memory card error. Turn off the camera power and turn it on again. Insert the memory card again. Insert and format the memory card. (p.84) [ Card Locked! ] • The memory card is locked. SD/SDHC memory card: Slide the write protect switch to the top of the memory card. [ No Card! ] • A memory card is not inserted. Insert the memory card. Turn off the camera power and turn it on again.
Before contacting a service centre Please check the following. The camera doesn’t switch on. • There is low battery capacity. Insert fresh batteries. (p.15) • Battery is inserted incorrectly with the polarities reversed. Insert the battery according to the polarity marks (+, -). The camera power ceases while in use. • The battery is exhausted. Insert a fully charged battery. • The Camera is turned off automatically Turn on the camera power again.
Before contacting a service centre The flash does not fire. • Flash off mode has been selected. Dis-engage flash off mode. • The camera mode can’t use the flash. Refer to the FLASH instruction. (p.35-36) Incorrect date and time is displayed • The date and time have been set incorrectly or the camera has adopted the default settings. Reset the date and time correctly. A card error has occurred while the memory card is in the camera. • Incorrect memory card format. Re-format the memory card.
Before contacting a service centre A part of the LCD screen does not occasionally turn on or a spot appears. • Although the LCD screen is manufactured with high precision technology, the precision pixels are not occasionally lighted or the red, white and blue spots appear. This phenomenon does not affect the quality of the recorded image and it is not a malfunction. A vertical line appears on the LCD screen when taking a picture of a bright object.
FAQ Case 5 Are other USB cables connected to the PC? The camera may malfunction when it is connected to the PC at the same time as another USB cable. In this case, disconnect the other USB cable, and connect only one USB cable to the camera.
FAQ When the DirectX 9.0c or later is not installed Install the DirectX 9.0c or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive:\ DirectX] folder and click the DXSETUP.exe fi le. The DirectX will be installed. Visit the following site for downloading the DirectX.http://www. microsoft.com/directx If a PC connected with the camera stops responding while Windows is starting. In this case, disconnect the PC and the camera and Windows will start.
FCC notice NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
