i-Launcher guide For Samsung Camera Digital Imaging Div.
Installing i-Launcher 1 1. Enter the Settings menu. menu (Methods vary depending on the Model. Model Dial or Menu Key) 2. Select Connectivity → i-Launcher(PC Software) → On (default “On”) 3. Turn off the camera. 4 4. Connect the camera to your computer with the USB cable. cable You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your files. files The manufacturer is not responsible for any loss of data. data 5. Turn on the camera. 6.
Available programs when using i-Launcher Option p Description p Multimedia Viewer You can view files with Multimedia Viewer. Firmware Upgrade You can update the firmware of your camera. Map Download Manager You can download the Map file of your camera. (GPS model only) PC Auto Backup i-Launcher provides a link for downloading the PC Auto Backup program when h you connectt the th camera to t a computer. t You Y can send photos or videos that you captured with the camera to a PC wirelessly.
Using i-Launcher i L i-Launcher h allows ll you to play l back b k files fil with i h Multimedia M l i di Viewer Vi and d provides id a lilink k to d download l d the PC Auto Backup program. • The requirements are recommendation only. only ii-Launcher Launcher may not work properly even when the computer meets the requirements, depending on the condition of your computer.
Using Multimedia Viewer Multimedia Viewer allows you to play back files. From the Samsung ii-Launcher Launcher screen, click Multimedia Viewer • Multimedia Viewer supports the following formats: - Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9) 7/8/9), AVI (MJPEG) - Photos: JPG JPG, GIF GIF, BMP BMP, PNG, PNG TIFF, TIFF MPO • Files that have been recorded with other manufacturers’ devices may not play back smoothly.
Updating the firmware Before upgrading the firmware 1. Make sure you use fully charged batteries. If fully charged batteries are not used, or the power is cut during a firmware upgrade, the main board may be seriously damaged, resulting in camera malfunction. If camera malfunction is caused during a firmware upgrade for the reasons given above, above the main board may have to be serviced by a Samsung service center, which may result in major repair charges. 2.
Updating the firmware How to Upgrade the Firmware 3. Please read precaution before upgrade firmware. 1. Connect with Camera and PC via cable and PC recognize camera 2. From the Samsung i-Launcher screen, click Firmware Upgrade. 4.
Updating the firmware 5 Finish do 5. downloading nloading and disconnect with ith camera 9. The firmware version will display on the LCD 9 screen. Press and hold the shutter button to start the firmware update process. 10. The display will show “Firmware is updating...” Once the firmware update process is complete, the camera will automatically power off. ff 7. Disconnect the Camera from the PC 8.
