USER MANUAL WB800F Click a topic This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.
Health and safety information Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Prevent damage to subjects’ eyesight. Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals. If you use the flash too close to your subject’s eyes, you can cause temporary or permanent eyesight damage.
Health and safety information Avoid covering the camera or charger with blankets or clothes. The camera may overheat, which may distort the camera or cause a fire. Avoid interference with pacemakers. Maintain the distance between this camera and all pacemakers to avoid potential interference, as recommended by the manufacturer and research groups.
Health and safety information Caution—situations that could cause damage to your camera or other equipment Use the battery only for its intended purpose. Misusing the battery may cause a fire or electric shock. Remove the batteries from your camera when storing it for an extended period of time. Installed batteries may leak or corrode over time and cause serious damage to your camera. Do not touch the flash while it fires. The flash is very hot when fired and may burn your skin.
Health and safety information Do not drop or subject the camera to strong impacts. Doing so may damage the screen or external or internal components. You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data. Exercise caution when you connect cables or adapters and install batteries and memory cards.
Outline of the User Manual Copyright information Basic functions • Microsoft Windows and the Windows logo are registered trademarks of the Learn about your camera’s layout, icons, and basic functions for shooting. Microsoft Corporation. • Mac and Apple App Store are registered trademarks of the Apple Corporation. • Google Play Store is a registered trademark of Google, Inc.
Indicators used in this manual Mode Smart Auto Program Aperture Priority, Shutter Priority, Manual Smart Best Face Magic Plus Settings Wi-Fi Icons used in this manual Indicator T Icon Function Additional information p G s i g n w Safety warnings and precautions [] () * Shooting mode icons These icons appear in the text when a function is available in a mode. See the example below. Note: The s or g mode may not support functions for all scenes or modes.
Expressions used in this manual Pressing the shutter • Half-press [Shutter]: Press the shutter halfway down • Press [Shutter]: Press the shutter all the way down Half-press [Shutter] Exposure (Brightness) The amount of light that enters your camera determines the exposure. You can alter the exposure by changing the shutter speed, aperture value, or ISO sensitivity. By altering the exposure, your photos will be darker or lighter.
Special features of your camera Setting a DIRECT LINK button option You can select a Wi-Fi function to launch when you press the DIRECT LINK button. Using the Touch screen and camera buttons You can operate the camera by either touching the screen or pressing the camera buttons. Using the DIRECT LINK button Press the DIRECT LINK button to activate the Wi-Fi function that you have designated. 8 1 Access Settings. 2 3 Access the DIRECT LINK button option. Select a Wi-Fi feature from the list.
Special features of your camera Using AutoShare When you capture a photo with your camera, the photo is saved to the smart phone automatically. The camera connects to a smart phone wirelessly. 1 4 Install Samsung SMART CAMERA App on the smart phone. Select the camera from the list and connect the smart phone to the camera. • If a pop-up message appears on your camera, allow the smart phone to connect to your camera. 2 Turn on the AutoShare feature. 5 Capture a photo.
Special features of your camera Using MobileLink You can send files easily from your camera to a smart phone. The camera connects wirelessly to smart phones that support the MobileLink feature. 1 4 Install Samsung SMART CAMERA App on the smart phone. Select the camera from the list and connect the smart phone to the camera. • If a pop-up message appears on your camera, allow the smart phone to connect to your camera. 2 Access the MobileLink mode.
Special features of your camera Using Remote Viewfinder You can remotely control your camera from a smart phone. The camera connects to a smart phone wirelessly. Use the smart phone as a remote shutter release with the Remote Viewfinder feature. The captured photo will appear on the smart phone. 1 4 Install Samsung SMART CAMERA App on the smart phone. Select the camera from the list and connect the smart phone to the camera.
Special features of your camera Shooting samples – Macro 1 Select the macro option ( 2 Capture a photo. You can capture close up shots of small subjects, such as flowers or insects. The example image may differ from the actual photo that you capture. 12 ).
Basic troubleshooting Learn to solve common problems by setting shooting options. The subject’s eyes appear red. Red eye occurs when the subject's eyes reflect light from the camera flash. • Set the flash option to Red-eye or Red-eye Fix. (p. 67) • If the photo has already been captured, select Red-eye Fix in the edit menu. (p. 101) Photos have dust spots. If dust particles are present in the air, you may capture them in photos when you use the flash.
Quick reference Capturing photos of people • s mode > Beauty Face f 51 • i mode f 54 • Red-eye/Red-eye Fix (to prevent or correct red-eye) f 67 • Face Detection f 76 • Self-Portrait f 76 Capturing photos at night or in the dark Adjusting the exposure (brightness) • • • • s mode > Rich Tones f 51 ISO sensitivity (to adjust the sensitivity to light) f 70 EV (to adjust exposure) f 79 ACB (to compensate for subjects against bright backgrounds) f 80 • Metering f 80 • AE Bracket (to capture 3 photos of the s
Contents Basic functions................................................................................................................. 19 Extended functions ....................................................................................................... 43 Unpacking ................................................................................................................... 20 Using the Smart Auto mode .................................................................................
Contents Using Face Detection .............................................................................................. 76 Shooting options............................................................................................................ 64 Detecting faces ....................................................................................................... Capturing a self portrait shot ...............................................................................
Contents Playback/Editing............................................................................................................. 88 Wireless network .......................................................................................................... 113 Viewing photos or videos in Playback mode ................................................. 89 Connecting to a WLAN and configuring network settings ..................... 114 Starting Playback mode ...........................................
Contents Settings ............................................................................................................................. 133 Settings menu ......................................................................................................... 134 Accessing the settings menu ............................................................................. Sound ..................................................................................................................... Display .
Basic functions Learn about your camera’s layout, icons, and basic functions for shooting.
Unpacking The following items are included in your product box. Optional accessories Camera Rechargeable battery AC adapter/USB cable Camera case A/V cable HDMI cable Battery charger Memory card Memory card/ Memory card adapter Strap Quick Start Guide • The illustrations may differ slightly from the items shipped with your product. • The items included in the box may differ depending on the model. • You can purchase optional accessories at a retailer or a Samsung service center.
Camera layout Before you start, familiarize yourself with your camera’s parts and their functions. Flash pop-up button Power button Microphone Internal antenna* Shutter button * Avoid contact with the internal antenna while using the wireless network. AF-assist light/Timer lamp Flash* * While not in use, keep the flash unit closed to prevent damage. Forcing to open the flash unit may cause damage to your camera.
Camera layout DIRECT LINK button Start a preset Wi-Fi function Zoom button • In Shooting mode: Zoom in or out • In Playback mode: Zoom in on part of a photo or view files as thumbnails, or adjust the volume Mode dial (p.
Camera layout Buttons Button Using the DIRECT LINK button Description You can turn on the Wi-Fi feature conveniently with [DIRECT LINK]. Press [DIRECT LINK] to activate the Wi-Fi function that you have designated. Press [DIRECT LINK] again to return to the previous mode. Start recording a video. Access options or menus. Go back. Basic functions D Change the display option. Change the macro option. c Change the flash option. F Change the timer and burst t options. Confirm the highlighted option or menu.
Inserting the battery and memory card Learn how to insert the battery and an optional memory card into the camera. Removing the battery and memory card Slide the lock down to release the battery. Battery lock Rechargeable battery Insert a memory card with the goldcolored contacts facing up. Memory card Push the card gently until it disengages from the camera, and then pull it out of the slot. Memory card Insert the battery with the Samsung logo facing up.
Charging the battery and turning on your camera Charging the battery Turning on your camera Before you use the camera for the first time, you must charge the battery. Plug the small end of the USB cable into your camera, and then plug the other end of the USB cable into the AC adapter. Press [X] to turn your camera on or off. • The initial setup screen appears when you turn on the camera for the first time. (p.
Performing the initial setup When you turn on your camera for the first time, the initial setup screen appears. Follow the steps below to configure the camera’s basic settings. The language is preset for the country or region where the camera is sold. You can change the language as desired. You can also select an item by touching it on the screen. 1 2 5 Press [c] to select Time Zone, and then press [t] or [o]. Press [c] to select Date/Time Set, and then press [t] or [o].
Performing the initial setup 8 9 10 11 12 Press [c] to select Date Type, and then press [t] or [o]. Press [D/c] to select a date type, and then press [o]. Press [c] to select Time Type, and then press [t] or [o]. Press [D/c] to select a time type, and then press [o]. Press [b] to finish the initial setup.
Learning icons The icons the camera displays on the screen change according to the mode you select or the options you set. If you change a shooting option, the corresponding icon will blink briefly in yellow.
Selecting modes Use the mode dial to select a shooting mode or function. Rotate the mode dial to a desired mode. You can also select an icon on the Mode screen in some modes. 1 Icons on the Mode screen Icon T My Magic Ma Split Shot Motion Frame Fram Photo Movie Filter Photo Filter p 2 Photo Editor ▲ For example: When you select My Magic Frame in Magic Plus mode No. G 1 Description Current Mode screen • Rotate the mode dial to go to another mode screen.
Selecting modes Icon g Description Icon My Magic Frame: Capture a photo and select an area to make it transparent. Overlay a newly captured photo onto the area. (p. 55) Split Shot: Capture several photos and arrange them with preset layouts. (p. 57) Motion Photo: Capture and combine a series of photos, and then select an area to be animated to create a GIF animation. (p. 58) Photo Filter: Capture a photo with various filter effects. (p. 59) MobileLink: Send photos or videos to a smart phone. (p.
Selecting options or menus Press [m] or [ /f] to select an option or a menu. You can also touch the screen to select an option or a menu. Selecting with buttons Press [m], and then press [D/c/F/t] or [o] to select an option or a menu. 1 2 For example, to select a White Balance option in Program mode: 1 Rotate the mode dial to p. 2 Press [m]. In Shooting or Playback mode, press [m]. Scroll to an option or a menu. • To move up or down, press [D] or [c]. • To move left or right, press [F] or [t].
Selecting options or menus 3 Press [D/c] to select White Balance, and then press [t] or [o]. EV Touch m on the screen, drag the option list up or down, and then touch an option to select it. 1 2 White Balance ISO In Shooting or Playback mode, touch m on the screen. Drag the option list up or down, and then touch an option. Flash ACB Focus Metering Exit 4 Selecting by touch Drive/Timer Select AE Bracket Set Press [F/t] to select a White Balance option.
Selecting options or menus Learning touch gestures Flicking: Gently flick your finger across the screen. Do not use sharp objects, such as pens or pencils, to touch the screen. You can damage the screen. Touching: Touch an icon to select a menu or option. My Magic Split Shot Motion M Mo n Frame Photo Photo Filter • The touch screen may not recognize your inputs if you touch multiple items at the same time. Movie Filter • When you touch or drag the screen, discolorations may occur.
Selecting options or menus 4 Using Smart Panel Press [ /f] or touch f on the screen to select an option or a menu. Some options are not available depending on the menu you select. For example, to select a White Balance option in Program mode: • For some items, you can directly select an option by rotating [Zoom] to the left or right without having to press [o]. 5 Press [F/t] to select a White Balance option. White Balance : Daylight 1 Rotate the mode dial to p.
Setting the display and sound Learn how to change the basic display information and sound settings. About histograms Setting the display type You can select a display type for the Shooting or Playback mode. Each type displays different shooting or playback information. See the table below. A histogram is a graph that illustrates how light is distributed in your photo. If the histogram has a high peak on the left, the photo is underexposed and will appear dark.
Setting the display and sound Setting the option display view Setting the sound You can hide or show the option display appearing in some modes. Turn on or off the sound your camera emits when you perform functions. Press [o] repeatedly. 1 2 3 • Hide the option display. • Show the option display. Rotate the mode dial to n. Select Sound Beep Sound. Select an option.
Capturing photos Learn how to capture photos easily and quickly in Smart Auto mode. 1 Rotate the mode dial to T. 2 Align your subject in the frame. 3 Half-press [Shutter] to focus. 4 5 Press [Shutter] to capture a photo. 6 Press [P] to return to Shooting mode. • A green frame means the subject is in focus. • A red frame means the subject is out of focus. Press [P] to view the captured photo. • To delete the photo, press [ /f], and then select Yes. See page 41 for tips to get clearer photos.
Capturing photos Digital zoom Zooming You can capture close-up photos by adjusting the zoom. pAhM The Digital zoom is supported by default in Shooting mode. If you zoom in on a subject in Shooting mode and the zoom indicator is in the digital range, your camera is using the Digital zoom. By using both the 21X Optical zoom and 5X Digital zoom, you can zoom in up to 105 times.
Capturing photos Intelli zoom TpAhM Setting Intelli zoom If the zoom indicator is in the Intelli range, your camera is using the Intelli zoom. Photo resolution varies according to the zoom rate if you use the Intelli zoom. By using both the Optical zoom and Intelli zoom, you can zoom in up to 42 times. Photo resolution when the Intelli zoom is on Optical range 1 2 3 In Shooting mode, press [m]. Select Intelli Zoom. Select an option. Icon Description Off: The Intelli zoom is deactivated.
Capturing photos Reducing camera shake (OIS) pAhM • OIS may not function properly when: - you move your camera to follow a moving subject - you use the Digital zoom - there is too much camera shake - the shutter speed is slow (for example, when you capture night scenes) - the battery is low - you capture a close-up shot • If you use the OIS function with a tripod, your images may be blurred by the Reduce camera shake optically in Shooting mode. vibration of the OIS sensor.
Tips for getting a clearer photo Holding your camera correctly Reducing camera shake Ensure nothing is blocking the lens, flash, or microphone. Set the Optical Image Stabilization option to reduce camera shake optically. (p. 40) When Half-pressing the shutter button is displayed Half-press [Shutter] and adjust the focus. The camera adjusts the focus and exposure automatically. Camera shake The camera sets the aperture value and shutter speed automatically.
Preventing your subject from being out of focus It may be difficult to get your subject in focus when: - there is little contrast between the subject and background (for example, when your subject is wearing clothing that is similar in color to the background) - the light source behind the subject is too bright - the subject is shiny or reflective - the subject includes horizontal patterns, such as blinds - the subject is not positioned in the center of the frame • When you capture photos in low light Turn
Extended functions Learn how to capture a photo and record a video by selecting a mode.
Using the Smart Auto mode In Smart Auto mode, your camera automatically chooses the appropriate camera settings based on the type of scene it detects. The Smart Auto mode is helpful if you are not familiar with the camera settings for various scenes. 1 2 Rotate the mode dial to T. Icon Description Portraits with backlighting Align your subject in the frame. • The camera automatically selects a scene. An appropriate scene icon appears at the top left of the screen. The icons are listed below.
Using the Smart Auto mode 3 4 Half-press [Shutter] to focus. Press [Shutter] to capture the photo. • If the camera does not recognize an appropriate scene mode, it uses the default settings for the Smart Auto mode. • Even if it detects a face, the camera may not select a portrait mode depending on the subject's position or lighting. • The camera may not select the correct scene depending on the shooting conditions, such as camera shake, lighting, or distance to the subject.
Using the Program mode In Program mode, you can set most options, except the shutter speed and aperture value, which the camera sets automatically. 1 2 Rotate the mode dial to p. 3 Align your subject in the frame, and then half-press [Shutter] to focus. 4 Press [Shutter] to capture the photo. Set the desired options. • For a list of options, refer to "Shooting options". (p.
Using the Aperture Priority, Shutter Priority, or Manual mode Adjust the aperture value or shutter speed to control the exposure of your photos. You can use these options in the Aperture Priority, Shutter Priority, and Manual modes. Aperture value The aperture is a hole that lets light into the camera. The aperture housing contains thin, metal plates that open and close, widening or narrowing the aperture, and controlling the amount of light that enters the camera.
Using the Aperture Priority, Shutter Priority, or Manual mode Using the Aperture Priority mode The Aperture Priority mode allows you to set the aperture value manually while the camera automatically selects an appropriate shutter speed. 1 2 Rotate the mode dial to G. Select 3 Press [o] to save the setting. 6 Align your subject in the frame, and then half-press [Shutter] to focus. 7 Press [Shutter] to capture the photo. .
Using the Aperture Priority, Shutter Priority, or Manual mode Using the Shutter Priority mode The Shutter Priority mode allows you to set the shutter speed manually while the camera automatically selects an appropriate aperture value. 1 2 Rotate the mode dial to G. Select 3 Press [o] to save the setting. 6 Align your subject in the frame, and then half-press [Shutter] to focus. 7 Press [Shutter] to capture the photo. .
Using the Aperture Priority, Shutter Priority, or Manual mode Using the Manual mode The Manual mode allows you to adjust both the aperture value and the shutter speed manually. 1 2 Rotate the mode dial to G. Select 3 Press [F/t] to adjust the aperture value or shutter speed. 5 6 Press [o] to save the setting. 7 Align your subject in the frame, and then half-press [Shutter] to focus. 8 Press [Shutter] to capture the photo. .
Using the Smart mode In Smart mode, you can capture a photo with options that are preset for a specific scene. 1 2 Rotate the mode dial to s. Option Panorama Select a scene. • To select another mode when the mode dial is set to s, press [b] or touch Waterfall , and then select a mode. Silhouette Sunset Smart : Beauty Face Low Light Shot Fireworks Light Trace Set Option Beauty Face Description Capture a portrait with options to hide facial imperfections.
Using the Smart mode 5 Using the Panorama mode In Panorama mode, you can capture a wide panoramic scene in a single photo. Capture and combine a series of photos to create a panoramic image. With [Shutter] pressed, slowly move the camera in the direction that will let it capture the rest of the panorama. • Arrows toward the direction of motion are displayed, and the entire shooting image is displayed in the preview box. • When the scenes are aligned, the camera captures the next photo automatically.
Using the Smart mode • For best results when capturing panoramic photos, avoid the following: - moving the camera too quickly or too slowly - moving the camera too little to capture the next image - moving the camera at irregular speeds - shaking the camera - shooting in dark places - capturing moving subjects nearby - shooting conditions where the brightness or color of light is changing • Photos taken are automatically saved, and shooting is stopped under the • • • • following conditions: - if you chang
Using the Best Face mode In Best Face mode, you can capture multiple photos and replace faces to create the best possible image. Use this mode to select the best image for each individual when capturing group photos. 1 2 Rotate the mode dial to i. 3 Press [Shutter] to capture the photo. 4 Touch a face to replace. 5 Touch the best image from the 5 faces that were captured. 6 Touch Align your subject in the frame, and then half-press [Shutter] to focus.
Using the Magic Plus mode In the Magic Plus mode, you can capture a photo with various effects. 5 Using the My Magic Frame mode Select a frame. In My Magic Frame mode, you can make part of the photo transparent, and then capture a new photo within the transparent area. 1 2 Rotate the mode dial to g. Select . • To select another mode when the mode dial is set to g, press [b] or touch , and then select a mode. 3 Half-press [Shutter] to focus, and then press [Shutter] to capture a background photo.
Using the Magic Plus mode 7 10 Drag the selected frame to place it to a desired location. Align your subject in the frame, and then half-press [Shutter] to focus. • To recapture a background photo, touch 11 Press [Shutter] to capture a photo. 12 Touch . • Press [b] to return to the previous screen. to save the photo. • Some shooting options are not available. • The focus is set to the transparent area in the frame. • The resolution is fixed at . 8 9 Press [o].
Using the Magic Plus mode Using the Split Shot mode In Split Shot mode, you can capture several photos and arrange them with preset layouts. 1 2 Rotate the mode dial to g. Select . 4 Align your subject in the frame, and then half-press [Shutter] to focus. 5 Press [Shutter] to capture a photo. • Repeat steps 4 and 5 to capture the rest of the photos. • To recapture a photo, press [b]. • To select another mode when the mode dial is set to g, press [b] or touch , and then select a mode.
Using the Magic Plus mode 5 Using the Motion Photo mode On the screen, draw an area to be animated. In Motion Photo mode, you can capture and combine a series of photos, and then select an area to be animated to create a GIF animation. 1 2 Rotate the mode dial to g. Select . • To select another mode when the mode dial is set to g, press [b] or touch , and then select a mode. 3 Align your subject in the frame, and then half-press [Shutter] to focus. 4 Press [Shutter] to capture the photo.
Using the Magic Plus mode 3 Using the Photo Filter mode Apply various filter effects to your photos to create unique images. Select an effect. Option Miniature Vignetting Ink Painting Oil Painting Miniature Cartoon Vignetting Cross Filter Sketch Soft Focus Fish-eye Classic Fish-eye 1 2 Sketch Retro Zooming Shot Rotate the mode dial to g. Select . • To select another mode when the mode dial is set to g, press [b] or touch , and then select a mode.
Using the Magic Plus mode 4 5 Align your subject in the frame, and then half-press [Shutter] to focus. Option Vignetting Press [Shutter] to capture a photo. • Depending on the option you select, the resolution may change to Description Sketch or smaller automatically. Fish-eye Image an image.
Recording a video Record Full HD videos (1920 X 1080) of up to 20 minutes. The camera saves recorded videos as MP4 (H.264) files. • • • • • 1 H.264 (MPEG-4 part10/AVC) is a high-compression video format established by the international standards organizations ISO-IEC and ITU-T. If you use memory cards with slow write speeds, the camera may not save videos properly. Video recordings may be corrupted or fail to play back correctly.
Recording a video Capturing still images while recording a video Recording a video with the Smart Scene Detection function You can capture still images while recording a video without switching to the photo shooting modes (up to 6 photos). Images captured while recording a video In Smart Auto mode, your camera automatically chooses the appropriate camera settings based on the scene it has detected. 1 2 Rotate the mode dial to T. 3 Align your subject in the frame. Set the desired options.
Recording a video Icon Description Landscapes Sunsets Blue skies Forested areas 4 5 Press (Video recording) to start recording. Press (Video recording) again to stop recording. • If the camera does not recognize an appropriate scene mode, it uses the default settings for the Smart Scene Detection mode. • The camera may not select the correct scene depending on the shooting conditions, such as camera shake, lighting, and distance to the subject.
Shooting options Learn how to set the options in Shooting mode.
Selecting a resolution and quality Learn how to change the image resolution and quality settings. Selecting a resolution TpAhMsig Setting the video resolution As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the file size will also increase. Setting the photo resolution 1 2 3 1 2 3 In Shooting mode, press [m]. Select Movie Size. Select an option.
Selecting a resolution and quality Selecting a photo quality pAhMig Set a photo quality settings. Higher image quality settings will result in larger file sizes. The camera compresses and saves the photos you capture in the JPEG format. 1 2 3 In Shooting mode, press [m]. Select Quality. Select an option. Icon Description Super Fine: Capture photos in super high quality. Fine: Capture photos in high quality. Normal: Capture photos in normal quality.
Shooting in the dark Learn how to capture photos at night or in low light conditions. Preventing red-eye Using the flash ps When the flash fires when you capture a photo of a person in the dark, a red glow may appear in the person’s eyes. To prevent this, select Red-eye or Red-eye Fix. Refer to flash options in “Setting a flash option.” S Before correction Press the flash pop-up button to pop the flash up. When the flash unit pops up, the flash fires in accordance with the option you have selected.
Shooting in the dark Setting a flash option 3 TpAhMsg Use the flash when you capture photos in the dark or when you need more light in your photos. 1 2 Select an option. Icon Press the flash pop-up button to open the flash. In Shooting mode, press [F]. Shooting options 68 Description Off: • The flash will not fire. • The camera will display the shake warning when you are shooting in low light. Auto: The camera will select a proper flash setting for the scene it detects in Smart Auto mode.
Shooting in the dark Icon Adjusting the flash intensity Description Slow Sync: • The flash fires and the shutter stays open longer. • This option is recommended when you want to capture more ambient light to reveal more details in the background. • Use a tripod to prevent your photos from blurring. • The camera will display the shake warning when you are shooting in low light. Red-eye Fix: • The flash fires twice when the subject or background is dark.
Shooting in the dark Adjusting the ISO sensitivity pAhM The ISO sensitivity is the measure of a film’s sensitivity to light as defined by the International Organization for Standardization (ISO). The higher ISO sensitivity you select, the more sensitive to light your camera becomes. Use a higher ISO sensitivity to capture better photos and reduce camera shake when not using the flash. 1 2 3 In Shooting mode, press [m]. Select ISO. Select an option.
Changing the camera’s focus Learn how to adjust the camera’s focus to suit the subject and the shooting conditions. Using macro pAhMg Use macro to capture close-up photos of subjects, such as flowers or insects. Using auto focus TpAhMsg To capture sharp photos, select the appropriate focus option according to your distance from the subject. 1 In Shooting mode, press [c]. Focus : Normal (AF) Exit • Try to hold the camera firmly to prevent blurry photos.
Changing the camera’s focus 2 Adjusting the focus distance manually Select an option. Icon Description Normal (AF): Focus on a subject farther than 31 in. (80 cm) away. Farther than 138 in. (350 cm) away when you use the zoom. Manual Focus: Focus on a subject by adjusting the focus distance manually. (p. 72) Macro: Focus on a subject that is 4-31 in. (10–80 cm) from the camera. 59-138 in. (150–350 cm) when you use the zoom. Auto Macro: • Focus on a subject farther than 4 in. (10 cm) away.
Changing the camera’s focus Adjusting the focus area pAhM Adjusting the focus by touch You can get clearer photos by selecting an appropriate focus area according to your subject's location in the scene. 1 2 3 In Shooting mode, press [m]. Select Focus Area. Select an option. Icon TpAhMs Focus on the subject or capture a photo by touching on the screen. 1 2 3 In Shooting mode, press [m]. Select Touch AF. Select an option.
Changing the camera’s focus Using tracking auto focus Tracking AF allows you to track and automatically focus on your subject, even when you are moving. 1 2 3 In Shooting mode, press [m]. Select Touch AF Tracking AF. Touch the subject you want to track in the touch area. • A focus frame appears on the subject and follows the subject as you move the camera. • If you do not select a focus area, the focus frame will appear in the center of the screen.
Changing the camera’s focus Using One Touch Shot You can capture a photo with the touch of your finger. As you touch on a subject, the camera focuses on the subject automatically and captures a photo. 1 2 3 In Shooting mode, press [m]. Select Touch AF One touch shot. Touch the subject to capture a photo. If you use this function, you cannot set Timer, Intelli zoom, and Burst options.
Using Face Detection pAhMs If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. Detecting faces Capturing a self portrait shot Your camera automatically detects up to 10 human faces in one scene. Capture photos of yourself. The camera sets the focus distance to close-up, and then emits a beep when ready.
Using Face Detection Capturing a smile shot Detecting eye blinking The camera automatically releases the shutter when it detects a smiling face. If your camera detects closed eyes, it will automatically capture 3 photos in succession. 1 2 3 In Shooting mode, press [m]. 1 2 Select Face Detection Smile Shot. Compose your shot. In Shooting mode, press [m]. Select Face Detection Blink Detection. • The camera automatically releases the shutter when it detects a smiling face.
Using Face Detection Tips for detecting faces • When your camera detects a face, it tracks the detected face automatically. • Face Detection may not be effective when: - the subject is far from the camera (The focus frame will appear orange for Smile Shot and Blink Detection.
Adjusting brightness and color Learn how to adjust the brightness and color for better image quality. Adjusting the exposure manually (EV) 3 pAh Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo. Press [F/t] to adjust the exposure. • You can also drag the slider or touch +/- to adjust the exposure. • The photo will be brighter as the exposure value increases.
Adjusting brightness and color Compensating for backlighting (ACB) pAhM Changing the metering option When the light source is behind your subject or there is high contrast between your subject and the background, your subject is likely to appear dark in the photo. In this case, set the Auto Contrast Balance (ACB) option. The metering mode refers to the way in which a camera measures the quantity of light. The brightness and lighting of your photos will vary depending on the metering mode you select.
Adjusting brightness and color Selecting a White Balance setting pAhM The color of your photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select a White Balance setting that is appropriate for the lighting conditions, such as Auto WB, Daylight, Cloudy, or Tungsten. 1 2 3 In Shooting mode, press [m]. Select White Balance. Select an option. Icon Description Auto WB: Automatically set the White Balance based on the lighting conditions.
Adjusting brightness and color Customizing preset White Balance options Adjusting color temperature You can customize preset White Balance options except Auto WB and Custom Set. 1 2 3 4 5 In Shooting mode, press [m]. Select White Balance. Scroll to a desired option. Press [D]. 1 2 3 4 In Shooting mode, press [m]. Select White Balance Color Temp.. Press [D]. Press [F/t] to adjust the color temperature to match your light source.
Adjusting brightness and color Defining your own White Balance You can customize the White Balance by capturing a photo of a white surface, such as a piece of paper, under the lighting conditions in which you intend to capture a photo. The White Balance feature will help you to match the colors in your photo with the actual scene. 1 2 3 In Shooting mode, press [m]. Select White Balance Custom Set. Aim the lens at a piece of white paper, and then press [Shutter].
Using burst modes pAhMsig It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. Also, it can be difficult to adjust the exposure correctly and select a proper light source. In these cases, select one of the burst modes. You can also set the timer to delay shooting. 3 Align your subject in the frame, and then half-press [Shutter] to focus. 4 Press and hold [Shutter].
Using burst modes Using the timer Capturing bracketed photos 1 2 You can use the automatic exposure bracketing feature to capture multiple photos of the same subject with different exposure values. In Shooting mode, press [t]. 1 2 Select an option. Icon Option 2 Sec: Capture a photo after a 2-second delay. In Shooting mode, press [t]. Select AE Bracket. • When you press [Shutter], the camera captures 3 consecutive photos, each with 10 Sec: Capture a photo after a 10-second delay.
Adjusting images pAhM Adjust the sharpness, contrast, or saturation of your photos. 1 2 3 In Shooting mode, press [m]. 4 Select Image Adjust. Press [F/t] to adjust each value. • You can also drag the sliders or touch +/- to adjust the values. Sharpness Select an option.
Reducing the sound of the zoom TpAhMsig When you use the zoom while recording videos, the camera can record the sound of the zoom. Use the Sound Alive function to reduce the zoom noise. 1 2 3 In Shooting mode, press [m]. Select Voice. Select an option. Icon Description Sound Alive On: Turn on the Sound Alive function to reduce the zoom noise. Sound Alive Off: Turn off the Sound Alive function. The camera can record the zoom noise. Mute: Do not record sounds.
Playback/Editing Learn how to play back photos or videos, and edit photos. Also, learn how to connect your camera to your computer or TV (HDTV).
Viewing photos or videos in Playback mode Learn how to play back photos or videos and how to manage files. Photo file information Starting Playback mode View photos or play videos stored in your camera. 1 2 Memory in use Press [P]. • The most recent file will be displayed. • If the camera is off, it will turn on and display the most recent file. Histogram Press [F/t] to scroll through files. File Information • You can also drag the image left or right to move to another file.
Viewing photos or videos in Playback mode Video file information Viewing files as a folder Photos captured continuously appear as a folder. 1 • The camera will automatically play back photos in the folder. File Information Icon In Playback mode, press [F/t] or drag the image left or right to move to a desired folder. Description Current file/Total files Single View Folder name-File name Video file Protected file Play videos To display file information on the screen, press [D].
Viewing photos or videos in Playback mode Viewing files as thumbnails Viewing files by category Scan thumbnails of files. View files by category, such as date or file type. In Playback mode, rotate [Zoom] to the left to view thumbnails (12 at a time). Rotate [Zoom] to the left once more to display more thumbnails (24 at a time). Rotate [Zoom] to the right to return to the previous view. 1 2 In Playback mode, rotate [Zoom] to the left. Press [m], and then select Filter a category.
Viewing photos or videos in Playback mode 3 4 5 Protecting a file Select a list to open it. Protect a file from accidental deletion. Select a file to view it. Rotate [Zoom] to the left to return to the previous view. If you change the category, it may take some time for the camera to reorganize files depending on the number of files. 1 2 3 In Playback mode, select a file to protect. Press [m], and then select Protect On. Repeat steps 1 and 2 to protect additional files.
Viewing photos or videos in Playback mode Deleting multiple files You can select multiple files, and then delete them at once. Deleting all files You can select all files, and then delete them at once. 1 1 In Playback mode, press [m]. • When in thumbnails view, press [m], select Delete Select, and then In Playback mode, press [m]. • When in thumbnails view, press [m], select Delete Delete All, and skip to step 3, or press [ /f], select Select, and then skip to step 3.
Viewing photos or videos in Playback mode Viewing photos To Enlarge part of a photo or view photos as a slide show. Move the enlarged area Enlarging a photo Trim the enlarged photo In Playback mode, rotate [Zoom] to the right to enlarge a portion of the photo. Rotate [Zoom] to the left to zoom out. Enlarged area Back Crop Playback/Editing 94 Description • Press [D/c/F/t]. • Drag the screen to see another part of the photo. Press [o], and then select Yes.
Viewing photos or videos in Playback mode Viewing panoramic photos Viewing animated photos View photos captured in Panorama mode. View animated GIF files repeatedly that were captured in Motion Photo mode. 1 In Playback mode, scroll to a panoramic photo. 2 Press [o] or touch 1 2 3 • The entire panoramic photo appears on the screen. . • The camera automatically scrolls through the photo from left to right for a horizontal panoramic photo and from top to bottom for a vertical panoramic photo.
Viewing photos or videos in Playback mode * Default Option Music Effect 4 5 6 Description Set background audio. • Set a scene change effect between photos. (Off, Calm*, Shine, Relax, Lively, Sweet) • Select Off to cancel effects. • When you use the Effect option, the interval between photos will be set to 1 second. Playing a video In Playback mode, you can view a video, and then capture or trim parts of the playing video. You can save the captured or trimmed segments as new files.
Viewing photos or videos in Playback mode Icon / Description Move to the next file/Scan forward. (Each time you touch the scan forward icon, you change the scan speed in this order: 2X, 4X, 8X.) Adjust the volume or mute the sound. When playing a movie, you can begin using features such a scanning backward or scanning forward after the video has run for 2 seconds. 8 9 Press [c] or touch End Point. Press [c] or touch Trim to trim a video.
Editing a photo Learn how to edit photos. • The camera will save edited photos as new files. • When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to a lower resolution. • You cannot edit photos while viewing files as a folder. Open the folder and select a photo to edit each photo. • Photos captured in some modes cannot be edited.
Editing a photo Cropping a photo 1 2 3 4 5 Applying Smart Filter effects Rotate the mode dial to g, and then select . • You can also press [m], and then select Edit Image. Rotate [Zoom] to the left or touch Touch to select a photo. , and then select an area to drag and crop. Adjust the size of the area by dragging the corners of the box. Touch to save. Apply special effects to your photos. 1 Rotate the mode dial to g, and then select 2 3 4 Rotate [Zoom] to the left or touch .
Editing a photo Option Adjusting your photos Description Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Apply a watercolor painting effect. Ink Painting Apply an oil painting effect. Oil Painting Apply a cartoon painting effect. Cartoon Add lines that radiate outward from bright objects to imitate Cross Filter the visual effect of a cross filter. Apply a pen sketch effect. Sketch Hide facial imperfections or apply dreamy effects.
Editing a photo 3 Touch Icon , and then select an adjusting option. Description 4 5 Press [o]. 6 7 Press [o]. ACB (Adjust dark subjects) Brightness Contrast Saturation • If you selected • You can also drag the slider or touch +/- to adjust the option. • As the number increases, the skin tone becomes brighter and smoother. Touch Press [F/t] to adjust the option. 5 6 Touch o. Removing red-eye • You can also drag the slider or touch +/- to adjust the option. to save.
Viewing files on a TV (HDTV) Play back photos or videos by connecting your camera to a TV (HDTV) with the A/V (HDMI) cable. 1 2 3 4 5 Rotate the mode dial to n. Select Connectivity Video Out. Select the video signal output for your country or region. (p. 136) 6 Turn on your TV, and then select the A/V video source with the TV remote control. 7 Turn on your camera. • The camera automatically enters into Playback mode when you connect it to Turn off your camera and TV. a TV.
Viewing files on a TV (HDTV) 6 Viewing files on an HDTV You can view high-quality and uncompressed photos or videos on an HDTV that supports the Anynet+(CEC) profile using the optional HDMI cable. 1 2 3 4 5 Make sure that the HDTV and camera are turned on, and then select the HDMI mode on the HDTV.
Transferring files to the computer Connect the camera to a computer to transfer files from the camera's memory card to the computer. Transferring files to your Windows OS computer 5 Turn on the camera. 6 On your computer, select My Computer Removable Disk DCIM 100PHOTO. 7 Drag or save files to your computer. Connect the camera to your computer as a removable disk. Your computer must be running Windows XP, Windows Vista, Windows 7, or Windows 8 for you to connect the camera as a removable disk.
Transferring files to the computer Disconnecting the camera (for Windows XP) Transferring files to your Mac OS computer With Windows Vista, Windows 7 and Windows 8, the methods for disconnecting the camera are similar. 1 2 If the status lamp on your camera is blinking, wait until it stops. When you connect the camera to your Mac OS computer, the computer will automatically recognize the device. You can transfer files directly from the camera to the computer without installing any programs. Mac OS 10.
Transferring files to the computer 3 Turn on the camera. • The computer recognizes the camera automatically and displays a removable disk icon. 4 5 Open the removable disk. Drag or save files to your computer.
Using programs on a computer i-Launcher allows you to play back files with Multimedia Viewer and provides links so that you can download useful programs. 5 6 Installing i-Launcher 1 2 3 4 Rotate the mode dial to n. Select Connectivity i-Launcher On. Turn on the camera. When the pop-up window prompts you to install i-Launcher, select Yes. • If a pop-up window prompting you to run iLinker.exe appears, run it first.
Using programs on a computer Available programs when using i-Launcher Windows OS Requirements Option Multimedia Viewer Description You can view files with Multimedia Viewer. Item Firmware Upgrade You can update the firmware of your camera. i-Launcher provides a link for downloading the PC Auto Backup program when you connect the camera to a computer. You can send photos or videos that you captured with the camera to a PC wirelessly.
Using programs on a computer Mac OS requirements Item OS Requirements Mac OS 10.5 or higher (except PowerPC) RAM Minimum 256 MB RAM (512 MB or more recommended) Hard disk capacity Minimum 110 MB Others USB 2.0 port Opening i-Launcher On your computer, select Start All Programs Samsung i-Launcher Samsung i-Launcher. On your Mac, click Applications Samsung i-Launcher.
Using programs on a computer Using Multimedia Viewer Multimedia Viewer allows you to play back files. From the Samsung i-Launcher screen, click Multimedia Viewer. • Multimedia Viewer supports the following formats: - Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG) - Photos: JPG, GIF, BMP, PNG, TIFF, MPO • Files that have been recorded with other manufacturers’ devices may not play back smoothly. Viewing photos 1 No.
Using programs on a computer Viewing videos 1 No. 1 2 3 4 5 6 7 8 2 8 7 6 5 4 3 Playback/Editing 111 Description File name Adjust the volume. Open the selected file. Move to the next file. Stop Pause Move to the previous file.
Using programs on a computer Updating the firmware From the Samsung i-Launcher screen, click Firmware Upgrade. Downloading the PC Auto Backup program From the Samsung i-Launcher screen, click PC Auto Backup. For information about installing the PC Auto Backup program, refer to page 122.
Wireless network Learn how to connect to wireless local area networks (WLANs) and use functions.
Connecting to a WLAN and configuring network settings Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings. Connecting to a WLAN 1 2 3 Icon Rotate the mode dial to w. Select , , , or Secured AP . WPS AP Signal strength Press [m], and then select Wi-Fi Setting. • In some modes, follow the on-screen instructions until the Wi-Fi Setting Press [t] or touch to open AP setting options screen appears.
Connecting to a WLAN and configuring network settings Setting network options 1 In the Wi-Fi Setting screen, move to an AP, and then press [t] or touch . 2 Select each option, and then enter the required information. Option Network Password IP Setting Description Using the login browser You can enter your login information via the login browser when connecting to some APs, sharing sites, or cloud servers. Button/Icon [D/c/F/t] [o] Enter the network password.
Connecting to a WLAN and configuring network settings Network connection tips • Some Wi-Fi features are not available if you do not insert a memory card. • The quality of the network connection will be determined by the AP. • The further the distance between your camera and the AP, the longer it will take to connect to the network. • If a nearby device is using the same radio frequency signal as your camera, it may • If you cannot connect to a WLAN, try another AP from the available AP list.
Connecting to a WLAN and configuring network settings Entering text Icon Description Learn how to enter text. The icons in the table below let you move the cursor, change the case, etc. Press [D/c/F/t] to move to a desired key, and then press [o] to enter the key. You can also touch a key to enter it. Switch between Symbol mode and ABC mode. Enter a space. Done Save the displayed text. • You can use only the English alphabets in some modes, regardless of the display language.
Saving files to a smart phone automatically The camera connects to a smart phone that supports the AutoShare feature via a WLAN. When you capture a photo with your camera, the photo is saved to the smart phone automatically. • The AutoShare feature is supported by Galaxy series smart phones or Galaxy Tab models with the Android 2.2 OS or higher or iOS devices with the iOS 4.3 or higher. Before using this feature, check the device’s firmware and update it if needed.
Sending photos or videos to a smart phone The camera connects to a smart phone that supports the MobileLink feature via a WLAN. You can easily send photos or videos to your smart phone. • The MobileLink feature is supported by Galaxy series smart phones or Galaxy Tab models with the Android 2.2 OS or higher or iOS devices with the iOS 4.3 or higher. Before using this feature, check the device’s firmware and update it if needed.
Using a smart phone as a remote shutter release The camera connects to a smart phone that supports the Remote Viewfinder feature via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewfinder feature. The captured photo will display on the smart phone. • The Remote Viewfinder feature is supported by Galaxy series smart phones or Galaxy Tab models with the Android 2.2 OS or higher or iOS devices with the iOS 4.3 or higher.
Using a smart phone as a remote shutter release 7 On the smart phone, touch and hold 8 Release • The focus is automatically set to Multi AF. to focus. to capture the photo. • The photo will be resized to 640 X 360 when it is stored to the smart phone. • When you use this feature, the ideal distance between the camera and the smart phone may vary, depending on your surroundings. • The smart phone must be within 7 m of the camera to use this feature.
Using Auto Backup to send photos or videos You can send photos or videos that you captured with the camera to a PC wirelessly. Installing the program for Auto Backup on your PC Sending photos or videos to a PC 1 2 3 1 2 Install i-Launcher on the PC. (p. 107) Connect the camera to the PC with the USB cable. When the Auto Backup program icon appears, click it. • The Auto Backup program is installed on the PC and the information about the PC will be stored to the camera.
Using Auto Backup to send photos or videos 3 4 Select a backup PC. • When you connect the camera to the WLAN, select the AP that is connected to • If you have performed a backup before, skip to step 4. the PC. • The camera will search for available access points even if you are connecting to Select OK. • To cancel sending, select Cancel. • You cannot select individual files to backup. This function backs up only new • • • • files on the camera. The backup's progress will be shown on the PC monitor.
Sending photos or videos via email You can change settings in the email menu and send photos or videos stored on the camera via email. 5 Changing email settings In the email menu, you can change settings for storing your information. You can also set or change the email password. For information about entering text, refer to "Entering text". (p. 117) Select the Name box, enter your name, and then select Done. Sender Setting Name Storing your information 1 2 3 4 Email Rotate the mode dial to w.
Sending photos or videos via email Setting an email password 1 2 Changing the email password Rotate the mode dial to w. Select . • The camera will automatically attempt to connect to a WLAN via the most 1 2 recently connected AP device. Rotate the mode dial to w. Select recently connected AP device. • If the camera has not previously been connected to a WLAN, it will search for • If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p.
Sending photos or videos via email Sending photos or videos via email You can send photos or videos stored on the camera via email. For information about entering text, refer to "Entering text". (p. 117) 1 2 Rotate the mode dial to w. Select Select files to send. 7 8 Select Next. 9 Select Send. . • The camera will automatically attempt to connect to a WLAN via the most recently connected AP device.
Using photo or video sharing websites Upload your photos or videos to file sharing websites. Available websites will be displayed on your camera. To upload files to some websites, you must visit the website and register before connecting your camera. Accessing a website Uploading photos or videos 1 2 3 1 2 Rotate the mode dial to w. Select . Select a website. • If the pop-up message that prompts you to create an account appears, select OK.
Using photo or video sharing websites • You can set an upload folder for Facebook by pressing [m], and then selecting Upload Folder (Facebook) on the website's list screen. • You cannot upload files if the file size exceeds the limit. The maximum photo • • • • • • • • resolution you can upload is 2M, and the longest video you can upload is resolution or a video recorded using . If the selected 30 seconds at photo resolution is higher than 2M, it will be automatically resized to a lower resolution.
Using AllShare Play to send files You can upload files from your camera to AllShare Play online storage or view files on an AllShare Play device connected to the same AP. 3 Uploading photos to online storage 1 2 Rotate the mode dial to w. Select Web storage. Enter your ID and password, and then select Login OK. • For information about entering text, refer to "Entering text". (p. 117) • To select an ID from the list, select an ID.
Using AllShare Play to send files Viewing photos or videos on devices that support AllShare Play 1 2 Rotate the mode dial to w. Select 6 On the AllShare Play device, browse the shared photos or videos. • For information about searching for the camera and browsing the photos or videos on the AllShare Play device, refer to the device's user manual. • Videos may not play smoothly depending on the type of AllShare Play device or the network condition.
Using AllShare Play to send files • You can share up to 1,000 recent files. • On an AllShare Play device, you can view only photos or videos captured with • • • • • • • • your camera. The range of the wireless connection between your camera and an AllShare Play device may vary depending on the specifications of the AP. If the camera is connected to 2 AllShare Play devices, playback may be slower. Photos or videos will be shared in their original sizes.
Sending photos using Wi-Fi Direct When the camera connects via a WLAN to a device that supports the Wi-Fi Direct function, you can send photos to the device. This feature may not be supported on some devices. 1 2 3 5 On the device, turn on the Wi-Fi Direct option. On the camera, in Playback mode, scroll to a photo. On the device, allow the camera to connect to the device. • The photo will be sent to the device. Press [m], and then select Share(Wi-Fi) Wi-Fi Direct.
Settings Refer to options to configure your camera’s settings.
Settings menu Learn to configure your camera's settings. Accessing the settings menu 1 2 3 Select an item. Rotate the mode dial to n. Sound Select a menu. Volume Medium Beep Sound Settings Shutter Sound Sound On Sound 1 Start Sound Display Back Connectivity 4 General Off Select Select an option. Volume Option Sound Description Set various camera sounds and the volume. (p. 135) Display Customize the display settings. (p. 135) Set the connection options. (p.
Settings menu Sound Display * Default Item Volume Beep Sound Shutter Sound Start Sound AF Sound Description Set the volume of all sounds. (Off, Low, Medium*, High) Set the sound the camera emits when you press the buttons, switch modes, or touch the screen on or off. (Off, On*) Set the sound the camera emits when you press the shutter button. (Off, Sound 1*, Sound 2, Sound 3) Set the sound the camera emits when you turn on your camera.
Settings menu * Default Item Display Brightness Quick View Description Adjust the brightness of the screen. (Auto*, Dark, Normal, Bright) Normal is fixed in Playback mode even if you have selected Auto. Connectivity * Default Item Anynet+ (HDMI-CEC) Set whether or not to review a captured image before returning to the Shooting mode. (Off, On*) This feature does not work in some modes. Power Save If you perform no operations for 30 seconds, the camera automatically switches to Power save mode.
Settings menu * Default General * Default Item Network Information Description View the Mac address and network certification number of your camera. Language Set a language for the display text. Set the time zone for your location. When you travel to another country, select Visit, and then select the appropriate time zone. (Home*, Visit) Set the date and time. Set a date format. (YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY) Time Zone Date/Time Set Date Type Item Specify how to name files.
Settings menu * Default Item * Default Description Item Set whether or not to display the date and time on captured photos. (Off*, Date, Date & Time) AF Lamp • The date and time will be displayed on the bottom right corner of the photo. • Some printer models may not print the date and time Imprint properly.
Appendixes Get information about error messages, specifications, and maintenance.
Error messages When the following error messages appear, try these remedies. Error message Card Error Suggested remedies • Turn off your camera, and then turn it on again. • Remove your memory card, and then insert it again. • Format your memory card. Error message DCF Full Error You can lock an SD, SDHC, or SDXC card to prevent files from being deleted. Unlock the card when shooting. Card Locked Device disconnected. File Error File system not supported. Card not supported. Connection failed.
Error messages Error message Memory Full No Image File Photo transfer failed. Transfer failed. Suggested remedies Delete unnecessary files or insert a new memory card. Capture photos or insert a memory card that contains some photos. Network connection disconnected while transferring photos. Try restarting the AllShare Play feature. • The camera has failed to send a photo to the other camera. Try sending again.
Camera maintenance Camera body Cleaning your camera Wipe gently with a soft, dry cloth. Camera lens and display Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of lens cleaning paper and wipe gently. • Never use benzene, thinners, or alcohol to clean the device. These solutions can damage the camera or cause it to malfunction. • Do not press on the lens cover or use a blower brush on the lens cover.
Camera maintenance Storing for extended period of time • When you store the camera for an extended period, place it in a sealed container Using or storing the camera with an absorbent material, such as silica gel. Inappropriate places to use or store the camera • Over time, unused batteries will discharge and must be recharged before use. • You must reset the date and time when you turn the camera on after the camera • Avoid exposing the camera to very cold or very hot temperatures.
Camera maintenance • Your camera contains delicate parts. Avoid impacts to the camera. • Protect the display from external force by keeping it in the case when not in • • • • • • • • Paint or metal on the outside of the camera may cause allergies, itchy skin, use. Protect the camera from scratches by keeping it away from sand, sharp implements, or loose change. Do not use the camera if the screen is cracked or broken. Broken glass or acrylic could cause injury to your hands and face.
Camera maintenance Size Super Fine Fine Normal 1,006 1,897 2,692 1,329 2,461 3,437 2,508 4,359 5,780 Memory card adapter Memory card To use micro memory cards with this product, a PC, or a memory card reader, insert the card into an adapter. Video Size Memory card capacity 1920 X 1080 The memory capacity may differ depending on the scenes you shoot or shooting conditions.
Camera maintenance • Prevent memory cards from making contact with liquids, dirt, or foreign Cautions when using memory cards • Avoid exposing memory cards to very cold or very hot temperatures (below • • • • • • • • 0 °C/32 °F or above 40 °C/104 °F). Extreme temperatures can cause memory cards to malfunction. Insert a memory card in the correct direction. Inserting a memory card in the wrong direction may damage your camera and memory card.
Camera maintenance About the battery Battery life Use only Samsung-approved batteries. Average shooting time/ Number of photos Battery specifications Specification Model Description SLB-10A Type Lithium-ion battery 1,030 mAh 3.
Camera maintenance Low battery message Cautions about using the battery When the battery has fully discharged, the battery icon will turn red and the "Low Battery" message will appear. Protect batteries, chargers, and memory cards from damage. Prevent batteries from making contact with metal objects, as this can create a connection between the + and – terminals of your battery and lead to temporary or permanent battery damage and may cause a fire or electric shock.
Camera maintenance • If you reconnect the power cable when the battery is fully charged, the status • • • • • lamp turns on for approximately 30 minutes. Using the flash or recording videos depletes the battery quickly. Charge the battery until the red status lamp turns off. If the status lamp blinks in red, reconnect the cable, or remove the battery and insert it again. If you charge the battery when the cable is overheated or the temperature is too high, the status lamp may blink in red.
Camera maintenance Personal injury or death can occur if the battery is handled carelessly or improperly. For your safety, follow these instructions for proper battery handling: • The battery can ignite or explode if not handled properly. If you notice any deformities, cracks, or other abnormalities in the battery, immediately discontinue use of the battery and contact a service center.
Before contacting a service center If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted the suggested remedy and are still having problems with your device, contact your local dealer or service center. When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Before contacting a service center Situation Suggested remedies The date and time are incorrect Set the date and time in the display settings. (p. 137) The display or buttons do not work Remove the battery, and then insert it again. Situation Suggested remedies • Make sure that the focus option you set is suitable for close-up shots. (p. 71) The photo is blurry If you use your camera at very low temperatures, it may cause the camera screen to malfunction The camera display responds or discolor.
Before contacting a service center Situation Suggested remedies Situation • Make sure that the camera is correctly The TV does not display your photos Your computer does not recognize your camera Your computer disconnects the camera while transferring files Your computer cannot play videos connected to the TV with the A/V cable. • Make sure that your memory card contains photos. • Make sure that the USB cable is connected correctly. • Make sure that your camera is switched on.
Camera specifications Image sensor Type 1/2.3" (Approximately 7.76 mm) BSI CMOS Effective pixels Approximately 16.3 mega-pixels Total pixels Lens Approximately 17.0 mega-pixels Focal length Samsung Lens f = 4.1–86.1 mm (35 mm film equivalent: 23–483 mm) F-stop range F2.8 (W)–F5.9 (T) Normal (AF) Range • Still image mode: 1.0–21.0X Zoom Feature Focusing 3.0" (75.0 mm) 460K Type 4-31 in. (10–80 cm) Auto Macro 4 in. (10 cm)-infinity Manual Focus 4 in.
Camera specifications Flash Shooting Mode Auto, Red-eye, Fill in, Slow Sync, Off, Red-eye Fix • Modes: Smart Auto (Portrait, Night Portrait, Backlight Range • Wide: 11.81-157.48 in. (0.3–4.0 m) (ISO Auto) • Tele: 19.69-74.80 in. (0.5–1.9 m) (ISO Auto) Recharging time Approximately 4 sec.
Camera specifications Playback Icon • Type: Single image, Thumbnails, Multi Slide Show with Music and Effect, Movie clip Photos • Edit: Resize, Rotate, Smart Filter, Crop • Effect: Image Adjust (Brightness, Contrast, Saturation, ACB, Face Retouch, Red-eye Fix), Smart Filter (Off, Miniature, Vignetting, Ink Painting, Oil Painting, Cartoon, Cross Filter, Sketch, Soft Focus, Fish-eye, Classic, Retro, Zooming Shot) Videos 4608 X 3072 4608 X 2592 Image size Edit: Still image capture, Time trimming 2832 X
Camera specifications Wireless network Dimensions (W X H X D) MobileLink, Remote Viewfinder, SNS & Cloud, Email, S/W Upgrade Notifier, AllShare Play, Auto Backup, AutoShare Interface 4.35 X 2.56 X 0.85 in. (110.6 X 65 X 21.5 mm) (without protrusions) Weight 7.69 oz (218 g) (without battery and memory card) Digital output connector USB 2.0 Audio input/ output Internal speaker (Mono), Microphone (Mono) Operating Humidity Video output • A/V: NTSC, PAL (selectable) • HDMI 1.
Glossary ACB (Auto Contrast Balance) This feature automatically improves the contrast of your images when the subject is backlit or when there is a high contrast between your subject and the background. Composition Composition in photography means arranging objects in a photo. Usually, abiding by the rule of thirds leads to a good composition. AEB (Auto Exposure Bracket) This feature automatically captures several images at different exposures to help you capture a properly-exposed image.
Glossary EV Compensation All the combinations of the camera’s shutter speed and lens aperture that result in the same exposure. EV (Exposure Value) This feature allows you to quickly adjust the exposure value measured by the camera, in limited increments, to improve the exposure of your photos. Set the EV compensation to -1.0 EV to adjust the value one step darker and 1.0 EV to one step brighter.
Glossary Image sensor The physical part of a digital camera that contains a photosite for each pixel in the image. Each photosite records the brightness of the light that strikes it during an exposure. Common sensor types are CCD (Charge-coupled Device) and CMOS (Complementary Metal Oxide Semiconductor). ISO sensitivity The sensitivity of the camera to light, based on the equivalent film speed used in a film camera.
Glossary Optical zoom This is a general zoom which can enlarge images with a lens and does not degrade the quality of images. Quality An expression of the rate of compression used in a digital image. Higher quality images have a lower rate of compression, which usually results in a larger file size. Resolution The number of pixels present in a digital image. High resolution images contain more pixels and typically show more detail than low resolution images.
Correct disposal of batteries in this product (Applicable in countries with separate collection systems) Correct Disposal of This Product Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Index Cleaning A B AF-assist light Battery Location 21 Settings 138 Caution 148 Charging 25 Inserting 24 AF Sound 135 AllShare Play 129 Anynet+ 136 Aperture Priority mode 48 Auto Contrast Balance (ACB) Playback mode 100 Shooting mode 80 AutoShare 118 A/V port 21 Editing photos 98 Editing videos Capturing 97 Trimming 97 105 Contrast Blink Detection 77 Playback mode 100 Shooting mode 86 Brightness Playback mode 100 Shooting mode 79 D Date/Time Set 137 C Deleting files 92 Camera maintenance
Index Focus area Image Adjustment Center AF 73 Multi AF 73 Brightness Playback mode 101 Shooting mode 79 Formatting 138 Contrast Function button 23 Playback mode 101 Shooting mode 86 Red-eye 101 G Saturation Playback mode 101 Shooting mode 86 Sharpness 86 Guide Line 135 H Imprint 138 Half-press shutter 41 Intelli zoom 39 HDTV 103 ISO sensitivity 70 I L Icons Playback mode 89 Shooting mode 28 Language settings 137 M Metering Center-weighted 80 Multi 80 Spot 80 Macro Auto Macro 72 Macr
Index Power button 21 Retouching faces 101 Shutter button 21 T Power save mode 136 Rotating 98 Shutter Priority mode 49 Thumbnails 91 Slide show 95 Timer 85 Smart Auto mode 44 Time settings 26 Smart Filter Time zone settings 26, 137 Program mode 46 Protecting files 92 S Saturation Q Quick view 136 R Red-eye Playback mode 101 Shooting mode 67 Remote Viewfinder 120 Reset 138 Resolution Playback mode 98 Shooting mode 65 Playback mode 101 Shooting mode 86 Self portrait 76 Photo shooting mo
Index U W Unpacking 20 Website Accessing 127 Uploading photos or videos 127 USB port 21 V White Balance 81 Video Wireless network 114 Playback mode 96 Shooting mode 61 Video out 136 Viewing files Animated photos 95 Category 91 Folder 90 Panoramic photos 95 Slide show 95 Thumbnails 91 TV (HDTV) 102 Z Zoom Using the zoom 38 Zoom button 22 Zoom sound settings 87 Appendixes 166
Please refer to the warranty that came with your product or visit our website, www.samsung.com, for after-sales service or inquiries.
