Upgrade guide

[

WB850F] Firmware

pgrade guide by manual.

Before upgrading the firmware

●Makesureyouusefullychargedbatteries.

If camera malfunction is caused during a firmware upgrade for the reasons given above, the main board

may have to be serviced by a Samsung service center, which may result in majorrepaircharges.

● Before upgrading the firmware, make sure that you format the SD card on yourPCorcameraand

then download the necessary firmware file.

● Download the firmware file into the root directory of the SD card.

● Do not operate the camera, remove the batteries, or cut the power while upgrading firmware.

Operate the camera only after the firmware upgrade is complete.

How to upgrade firmware?

Download the firmware file into the root directory of the SD card root folder

Insert the SD card on which the firmware file is to be saved.

Turn on the camera. The version of firmware to upgrade will be displayed on the LCD screen.

When you press the shutter button, the firmware upgrade will start. After upgrading firmware

camera turned off automatically.

Please be careful GPS firmware will start again. Do not remove SD card.

Turn on the camera again, then GPS firmware will start automatically.

After finishing upgrade GPS firmware camera will turned off automatically.

※

If the firmware upgrade is not completed successfully or you need further detailed information or you

experience difficulty in upgrading firmware, then do not proceed with the process on your own and

isit

Samsung service center nearby

Copy

Unzip