USER MANUAL ENG This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.
Copyright information Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation. Mac and Apple App Store are registered trademarks of the Apple Corporation. Google Play Store is a registered trademark of Google, Inc. SD™, SDHC™, and SDXC™ are registered trademarks of the SD Association. HDMI, the HDMI logo, and the term “High Definition Multimedia Interface“ are trademarks or registered trademarks of HDMI Licensing LLC.
Health and safety information Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Warning—situations that could cause injury to yourself or others Do not disassemble or attempt to repair your camera. You can damage the camera and expose yourself to the risk of an electric shock. Do not use your camera near flammable or explosive gases and liquids. This may cause a fire or explosion.
Health and safety information If liquid or foreign objects enter your camera, immediately disconnect all power sources, such as the battery or charger, and then contact a Samsung service center. Comply with any regulations that restrict the use of a camera in a certain area. Avoid interference with other electronic devices. Caution—situations that could cause damage to your camera or other equipment Remove the batteries from your camera when storing it for an extended period of time.
Health and safety information Do not touch the flash while it fires. The flash is very hot when fired and may burn your skin. When you use the AC charger, turn off the camera before you disconnect the power to the AC charger. Failing to do so may result in fire or electric shock. Disconnect the charger from the wall socket when not in use. Failing to do so may result in fire or electric shock. Do not use a damaged power supply cord, plug, or loose outlet when you charge batteries.
Health and safety information You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your files. The manufacturer is not responsible for any loss of data. Do not expose the lens to direct sunlight. Data transference and your responsibilities Data transferred via WLAN can be stolen, so avoid transferring sensitive data in public areas or on open networks.
Indications used in this manual Icons used in this manual Icon Mode indications Function Mode Indication Additional information Auto t Safety warnings and precautions Program P ] Camera buttons. For example, [Shutter] represents the shutter button. Aperture Priority A [ Shutter Priority S ( ) Page number of related information Manual M The order of options or menus you must select to perform a step; for example: Select b ĺ Quality (represents select b, and then Quality).
Contents Tips Chapter 1 Concepts in Photography My Camera Shooting postures....................................................................................... 13 Getting started ............................................................................................ 29 Unpacking.................................................................................................................... 29 Camera layout ......................................................................................
Contents Display icons ................................................................................................ 46 In Shooting mode ..................................................................................................... 46 Capturing photos ........................................................................................................ 46 Recording videos .........................................................................................................
Contents AF area ........................................................................................................... 90 Selection AF ................................................................................................................ 90 Saving Selection AF position ................................................................................... 91 Multi AF.........................................................................................................................
Contents Voice............................................................................................................................ Wind Cut .................................................................................................................... Mic Level.................................................................................................................... Smart Range+ ..........................................................................................................
Contents Sending photos via email ........................................................................ 150 Connecting to a WLAN ......................................................................................... 150 Setting network options ......................................................................................... 151 Manually setting the IP address ........................................................................... 151 Network connection tips ..............................
Contents Chapter 6 Appendix Error messages .......................................................................................... 183 Maintaining the camera........................................................................... 184 Cleaning the camera ............................................................................................. 184 Camera lens and display ......................................................................................... 184 Image sensor .....................
Concepts in Photography Shooting postures A correct posture for stabilizing the camera is necessary for taking a good photo. Even if you hold a camera correctly, the wrong posture can cause the camera to shake. Stand up straight and remain still to maintain a steady base for your camera. When shooting with a slow shutter speed, hold your breath to minimize body movement. Standing photography Compose your shot, stand up straight with your feet shoulder-length apart, and keep your elbows pointed down.
Concepts in Photography Crouching photography Compose your shot, crouch with one knee touching the ground, and keep a straight posture. Using the display To take photos at high or low angles, tilt the display up or down. 1 Slide the display downwards carefully. 2 Tilt the display from 180˚ upwards to 45˚ downwards.
Concepts in Photography To capture a self-portrait, set Auto Self Shot to On, flip the display 180° upwards and touch the subject on the display. (p. 33) Keep the display closed when the camera is not in use. Tilt the display only within the angle allowed. Failing to do so may damage your camera. Be careful not to damage the display when tilting it. If you have flipped the display upwards and you are not holding the camera by hand, do not rest the camera on a table, fence, etc.
Concepts in Photography Aperture The aperture is one of the three factors that determine the exposure. The aperture housing contains thin, metal plates that open and close to let light through the aperture and into the camera. The size of the aperture is related to the amount of light: a larger aperture allows more light and a smaller aperture allows less light. Aperture sizes The size of the aperture is indicated by a value known as the “F-number“.
Concepts in Photography Aperture value and the depth of field You can blur or sharpen the background of a photo by changing the size of the aperture. A large aperture gives your photos a shallow depth of field (DOF). Objects immediately in front of or behind your subject will be blurred, while the subject will be in focus. A small aperture gives your photos a deep depth of field. Objects far in front or far behind your subject and your subject will be in focus.
Concepts in Photography Therefore, the faster the shutter speed, the less light will be let in. Likewise, the slower the shutter speed, the more light will be let in. Shutter speed Shutter speed refers to the amount of time it takes to open and close the shutter. It controls the amount of light which passes through the aperture before it reaches the image sensor. Shutter speeds are measured in seconds and parts of a second.
Concepts in Photography ISO sensitivity The exposure of an image is determined by the sensitivity of the camera to light. This sensitivity is measured by a set of international film standards, known as ISO standards. On digital cameras, this sensitivity rating is used to indicate the light sensitivity of the digital sensor that captures the image. Because a low ISO setting means the camera will be less sensitive to light, you need more light to have an optimal exposure.
Concepts in Photography How the aperture setting, shutter speed, and ISO sensitivity control exposure The aperture setting, shutter speed, and ISO sensitivity are closely interconnected in photography. The aperture setting controls the opening that regulates the light that enters the camera, while the shutter speed determines the length of time that light is allowed to enter. ISO sensitivity determines the speed at which the film or digital image sensor reacts to light.
Concepts in Photography Correlation between focal length, angle, and perspective Long focal length Focal length, which is measured in millimeters, is the distance between the middle of the lens to its focal point. It affects the angle and perspective of captured images. A short focal length translates into a wide angle, which allows you to capture a wide shot. A long focal length translates into a narrow angle, which allows you to capture telephoto shots.
Concepts in Photography What controls out-of-focus effects? Depth of field The depth of field (DOF) is the focused area around the subject. In general, the DOF can be shallow or deep. In photos with a shallow DOF, the subject is sharply focused, the background is blurred and the subject stands out. In contrast, photos with a deep DOF have all the elements of the photo in sharp focus. DOF depends on the aperture value A low aperture value indicates that the aperture has a wide opening.
Concepts in Photography DOF depends on focal length The longer the focal length, the shallower the DOF. A telescopic lens with a longer focal length will capture a photo with a shallow DOF better than a lens with a shorter focal length. DOF depends on the distance between the subject and the camera The shorter the distance between the subject and the camera, the shallower the DOF is. Therefore, taking a photo close to a subject generally results in a photo with a shallow DOF.
Concepts in Photography DOF preview You can press the Custom button to get an idea of what your shot will look like before shooting. The camera adjusts the aperture to the predefined settings and shows the results on the screen. Set the function of the Custom button to Optical Preview. (p. 171) Composition The way that objects are arranged in a photo is referred to as its composition.
Concepts in Photography Using the rule of thirds will create photos with stable and compelling compositions. Below are a few examples. Photos with two subjects If your subject is in one corner of the photo, it creates an unbalanced composition. You can stabilize the photo by capturing a second subject in the opposite corner to balance the weight of the photo. Subject 2 Subject 1 Unstable Subject 2 Subject 1 Stable When taking landscape photos, centering the horizon will create an unbalanced effect.
Concepts in Photography Flash guide number Flash Light is one of the most important components in photography. However, you will not always have enough of light in all situations. Making use of a flash allows you to compensate for the lack of light and create a variety of effects. The flash, also known as a strobe or speed light, provides adequate exposure in low-light conditions. It is also useful in light-abundant situations.
Concepts in Photography Bounce Photography Bounce photography refers to the method of bouncing light off of the ceiling or walls so that the light spreads evenly over the subject. Normally, photos captured with the flash may appear unnatural and cast shadows. Subjects in photos captured with bounce photography cast no shadows and look smooth due to evenly spread light.
Chapter 1 My Camera Learn about your camera’s layout, display icons, lens, optional accessories, and basic functions.
My Camera Getting started Unpacking Check your product box for the following items. Camera (including the body cap) AC adapter/USB cable Rechargeable battery Strap External flash Quick Start Guide The illustrations may differ from your actual items. You can purchase optional accessories at a retailer or a Samsung service center. Samsung is not responsible for any problems caused by using unauthorized accessories. For information about accessories, refer to page 213.
My Camera Camera layout 1 2 3 No. 4 5 4 6 17 16 15 14 7 8 9 13 12 No. 1 11 2 10 Name Mode dial t: Auto mode (p. 60) P: Program mode (p. 62) A: Aperture Priority mode (p. 64) S: Shutter Priority mode (p. 65) M: Manual mode (p. 66) T: Custom mode (p. 67) i: Samsung Auto Shot mode (p. 69) s: Smart mode (p. 71) 3 Name Command dial 1 In the Menu screen: Move to a desired 8 menu item. In the Smart panel: Adjust a selected option.
My Camera > Camera layout No. 2 1 2 3 3 10 9 8 No. 7 1 menu item. In the Smart panel: Move to a desired option. In Shooting mode: Adjust shutter speed, aperture value, Program Shift settings, exposure value, or ISO sensitivity in some shooting modes or move the focus area. (p. 174) In Playback mode: View the previous or next file. Scan backward or forward through a video. 5 7 recording standby mode or perform the assigned function. (p. 171) In Playback mode: Delete files.
My Camera > Camera layout No. Name 1 Battery chamber/Memory card cover 2 Tripod mount 3 NFC tag USB and shutter release port 4 Connect the camera to a computer or shutter release. Use a shutter release cable with a tripod to minimize camera movement. 5 HDMI port 6 Touch screen To take photos at high or low angles, tilt the display up or down. (p. 14, 33) Touch the screen to select a menu or an option. (p.
My Camera > Camera layout Using the display 3 Touch You can take a self-portrait while looking at yourself in the display by flipping the display up. 4 Drag the slider or touch the +/- icons to adjust Face Retouch. 5 Press [o] or touch Set. 6 Touch the frame area on the display or press [Shutter]. Using the Self Shot mode When you enable the Auto Self Shot option (p. 175), flipping the display upward activates Auto Self Shot mode.
My Camera Inserting the battery and memory card Learn how to insert the battery and an optional memory card into the camera. Removing the battery and memory card Battery lock Slide the lock up to release the battery. Insert the memory card with the goldcolored contacts facing up. Rechargeable battery Push the card gently until it disengages from the camera, and then pull it out of the slot. Memory card Insert the battery with the Samsung logo facing up.
My Camera > Inserting the battery and memory card Using the memory card adapter To use micro memory cards with this camera, a PC, or a memory card reader, insert the card into an adapter. While the status lamp of the camera is blinking, do not remove the memory card or battery. Doing so may damage the data stored on the memory card or your camera.
My Camera Charging the battery and turning on your camera Charging the battery Turning on your camera Before you use the camera for the first time, you must charge the battery. Plug the small end of the USB cable into your camera, and then plug the other end of the USB cable into the AC adapter. Set the Power switch to ON. Status lamp Red light on: Charging Green light on: Fully charged Red light blinking: Charging error To turn your camera off, set the Power switch to OFF.
My Camera Performing the initial setup When you turn on your camera for the first time, the initial setup screen appears. The language is preset for the country or region where the camera is sold. You can change the language as desired. You can also select an item by touching it on the screen. 4 Press [C/F] to select an item (Year/Month/Day). 5 Press [D/I] to set the option, and then press [o]. Back 1 Press [I] to select Time Zone, and then press [o].
My Camera > 8 Performing the initial setup Press [D/I] to set the option, and then press [o]. Back Set Time Settings Hour Min 11 Press [I] to select Time Type, and then press [o]. 12 Press [D/I] to select a time type, and then press [o]. DST Back Time Zone Date Settings Time Settings Time Type Date Type 12H 9 London 01/01/2015 10:00 AM Time Type 24H Press [I] to select Date Type, and then press [o]. 10 Press [D/I] to select a date type, and then press [o].
My Camera Selecting functions (options) Using custom buttons and dials Using buttons and dials Use one of the following methods to select an option: Scroll command dial 1, and then press [o]. Scroll command dial 2, and then press [o]. Press [D/I/C/F], and then press [o]. Assign various buttons and dials to launch your favorite functions. Functions can be assigned to the following buttons and dials: Custom button, AEL button, EV button, and command dials 1 and 2.
My Camera > Selecting functions (options) Selecting by touch When you touch or drag the screen, discolorations may occur. This is not a malfunction, but a characteristic of the touch screen. Touch or drag lightly to minimize the discolorations. The touch screen may not work properly if you use the camera in extremely humid environments. The touch screen may not work properly if you apply screen protection film or other accessories to the screen.
My Camera > 3 Selecting functions (options) Scroll command dial 1 or press [D/I] to move to b, and then press [o]. 5 You can also touch b on the screen. 4 Scroll command dial 2 or press [D/I] to move to an option, and then press [o]. You can also drag the option list, and then touch an option. Press [m] or touch Back to go back to the previous menu. Scroll command dial 2 or press [D/I] to move to Photo Size, and then press [o].
My Camera > Selecting functions (options) You can also select an option by touching it. Using the smart panel Back Press [f] or touch on the screen to access some functions such as Exposure, ISO, and White Balance. Adjust Key Mapping EV : 0.0 You can adjust some options by dragging them. E.g. Adjust the exposure value in P mode 1 Rotate the mode dial to P. 2 Press [f] or touch . 4 Scroll command dial 1 or command dial 2 or press [C/F] to adjust the exposure value, and then press [o].
My Camera > Selecting functions (options) Using the iFn standard function Using iFn Press [i-Function] on an i-Function lens to manually select and adjust shutter speed, aperture value, exposure value, ISO sensitivity, and White Balance on the lens. When you use [i-Function] on an i-Function lens, you can manually select and adjust shutter speed, aperture value, exposure value, ISO sensitivity, and White Balance on the lens. You can also use the intelli-Zoom function.
My Camera > Selecting functions (options) You can also press [i-Function], and then press [D/I] or drag the screen to select a setting. 5 Adjust the focus ring to select an option. You can also scroll command dial 2 or drag the screen to select an option. Option Description Aperture Adjust the aperture value. Shutter Speed Adjust the shutter speed. EV Adjust the exposure value. ISO Adjust the ISO sensitivity. White Balance Select a White Balance option.
My Camera > Selecting functions (options) Using the iFn plus function Available options Shooting mode P A S M 3D Aperture - O - O - Shutter Speed - - O O - EV O O O - O ISO O O O O - White Balance O O O O O intelli-Zoom O O O O On an i-Function lens, press [i-Function], and then press [a] or [B] on the camera. You can assign functions to selected buttons or open the i-Functions settings menu. E.g.
My Camera Display icons In Shooting mode Capturing photos 1. Shooting information Icon Description Icon Description Shooting mode Camera shake Current date Manual focus scale Current time Level gauge (p. 49) Bluetooth on Histogram (p. 116) Focal length* Focus Notification panel bar (Touch) Shutter speed Overheating warning indicator Aperture value Memory card not inserted** Auto exposure lock (p. 117) Auto focus lock (p. 117) Flash intensity lock (p.
My Camera > Display icons 2. Shooting options Icon Description 3. Shooting options (Touch) Face detection White Balance (p. 83) White Balance micro adjustment Optical Image Stabilization (OIS) (p. 99) intelli-zoom on intelli-zoom ratio Dynamic Range (p. 114) Icon Description Icon Description Photo size Change Smart mode* RAW file Save a custom mode Drive mode Quick Transfer (p. 148) Flash (p. 106) Touch AF options Flash intensity adjustment Shooting options Metering (p.
My Camera > Display icons Recording videos Icon Description Shooting mode 1. Shooting information Switch between AF and MF. (Touch) Switch between Single AF and Continuous AF. (Touch) Touch AF option (Touch) Current recording time/ Available recording time Icon Description : Fully charged : Partially charged (Red): Empty (recharge the battery) : Charging Zoom indicator* Exposure value ISO sensitivity (p. 80) Fast/Slow Movie (p.
My Camera > Display icons 2. Shooting options Icon Description Fader (p. 123) Fast/Slow Movie (p. 122) Voice recording off (p. 124) Zoom button* About the level gauge The level gauge helps you align the camera with the horizontal and vertical lines on the display. If the level gauge is not level, calibrate the level gauge using the Horizontal Calibration function. (p. 177) * This icon appears when you attach the Power Zoom lens.
My Camera > Display icons In Playback mode Viewing photos 1 Playing videos Stop Mode F No Shutter ISO Metering Flash Focal Length White Balance EV Photo Size Folder number-File number Date and Time Color Space Information Icon Description View image thumbnails. (Touch) 2 3 No. 1 2 Current file/The total number of files Notification panel bar (Touch) Send photos via email. (Touch) Share files with other devices.
My Camera > Display icons Changing the information displayed Press [D] repeatedly to change the display type. Mode Display type Basic shooting information + Shooting option buttons + Current shooting options information Basic shooting information (Shooting mode, Shutter speed, Aperture value, Exposure value, ISO sensitivity, etc.
My Camera > Display icons Viewing the notification panel Touch at the top of the display to open the notification panel. You can adjust the display brightness or view the current date and time, battery life, and data storage information. You can also view the status of a Bluetooth or Wi-Fi connection and enable or disable it.
My Camera Lenses You can purchase optional lenses made exclusively for your NX series camera. Learn about the functions of each lens and select one that suits your needs and preferences. Lens layout SAMSUNG 16-50mm F3.5-5.6 Power Zoom ED OIS lens (example) 1 6 2 3 No. 1 2 Description i-Function button (p. 43) Lens mount index 3 Focus ring (p. 96) Rotate the focus ring to adjust the zoom setting when using the auto focus function.
My Camera > Lenses SAMSUNG 20-50mm F3.5-5.6 ED II lens (example) Locking or unlocking the lens 7 To lock the lens, slide the zoom lock switch away from the camera body, hold it in place, and then rotate the zoom ring as shown in the illustration. 1 2 6 3 5 4 No. Description 1 2 Lens mount index 3 Lens 4 Focus ring (p. 96) 5 i-Function button (p. 43) 6 Zoom ring 7 Lens contacts* Zoom lock switch * Avoid contact with or prevent damage to the lens contacts.
My Camera > Lenses To unlock the lens, rotate the zoom ring as shown in the illustration until you hear the click. NX 50-150mm F2.8 S ED OIS lens (example) 1 2 8 9 3 4 5 6 7 10 11 12 13 14 You cannot capture a photo when the lens is locked. No. Description 1 2 3 Focus ring (p. 96) 4 AF/MF switch 5 Custom Focus Range Limiter switch 6 OIS switch Lens hood mount index i-Function button (p.
My Camera > Lenses No. Description 7 Zoom ring 8 Tripod ring 9 Lens mount index 10 Lens contacts* 11 Tripod ring locking dial 12 Tripod collar connection 13 Tripod connection 14 Tripod mount collar lock dial 2 Current focus distance Minimum focus distance Scroll command dial 2 to adjust the focus range. You can adjust the focus quickly and precisely by setting the range for the focus distance. 1 Maximum focus distance Scroll command dial 1 to adjust the focus range.
My Camera > Lenses Lens markings No. Find out what the numbers on the lens signify. Description Aperture value 1 SAMSUNG 18-200mm F3.5-6.3 ED OIS lens (example) A range of supported aperture values. For example, 1:3.5–6.3 means the aperture range is 3.5 to 6.3. Focal length 2 The distance from the middle of the lens to its focal point (in millimeters). This figure is expressed in a range: the minimum focal length to the maximum focal length of the lens.
My Camera Accessories You can use an external flash that can help you capture better photos. External flash layout For more information about optional accessories, refer to the manual for each accessory. SEF8A (example) 1 The illustrations may differ from the actual items. You can purchase Samsung-approved accessories at a retailer or a Samsung service center. Samsung is not responsible for damage caused by using another manufacturer’s accessories. 2 3 No.
My Camera > Accessories Connecting the external flash 1 Mount the flash by sliding it into the hot-shoe. 2 Lock the flash into place by turning the hot-shoe fastening dial clockwise. 3 Lift up the flash for use. You can capture a photo with a flash that is not fully charged, but it is recommended to use a fully charged flash. The available options may differ depending on the shooting mode. When you use Red-eye correction, there is an interval between two bursts of the flash.
My Camera Shooting modes Two simple shooting modes—Auto and Smart mode—help you capture photos with numerous automatic settings. Additional modes allow for greater customization of settings. Icon Description t Auto mode (p. 60) P Program mode (p. 62) A Aperture Priority mode (p. 64) S Shutter Priority mode (p. 65) M Manual mode (p. 66) T Custom mode (p.
My Camera > 3 Shooting modes Half-press [Shutter] to focus. Icon Description Sunsets The camera selects a scene. An appropriate scene icon appears on the screen. Indoors, dark Partially lit Close-up with spot lighting Portraits with spot lighting Blue skies Forested areas typically consist of green-colored subjects Close-up photos of colorful subjects Shooting in the dark when the camera is stabilized on a tripod and the subject does not move for a period of time.
My Camera > Shooting modes P Program mode 1 Rotate the mode dial to P. The camera automatically adjusts shutter speed and aperture value so that an optimal exposure value can be achieved. 2 Set the desired options. 3 Half-press [Shutter] to focus, and then press [Shutter] to capture the photo. This mode is useful when you want to capture shots of constant exposure while being able to adjust other settings.
My Camera > Shooting modes Program Shift The Program Shift function lets you adjust the shutter speed and aperture value while the camera maintains the same exposure. When you scroll command dial 1 or command dial 2 to the left, the shutter speed decreases and the aperture value increases. When you scroll command dial 1 or command dial 2 to the right, the shutter speed increases and the aperture value decreases. Minimum shutter speed Set a minimum shutter speed.
My Camera > Shooting modes A Aperture Priority mode 1 Rotate the mode dial to A. In Aperture Priority mode, the camera automatically calculates shutter speed according to the aperture value you choose. 2 Scroll command dial 1 or command dial 2 to adjust the aperture value. You can also assign other functions to command dials 1 and 2. You can adjust the depth of field (DOF) by changing the aperture value. This mode is useful for taking portraits, flowers, or landscape shots. (p.
My Camera > Shooting modes S Shutter Priority mode 1 Rotate the mode dial to S. In Shutter Priority mode, the camera automatically adjusts the aperture value according to the shutter speed you choose. This mode is useful for capturing photos of fast-moving subjects or for creating tracer effects in a photo. 2 Scroll command dial 1 or command dial 2 to adjust the shutter speed. You can also assign other functions to command dials 1 and 2. (p.
My Camera > Shooting modes M Manual mode Manual mode lets you adjust the shutter speed and aperture value manually. In this mode, you can fully control the exposure of your photos. This mode is useful in controlled shooting environments, such as a studio, or when it is necessary to fine-tune camera settings. The Manual mode is also recommended for shooting night scenes or fireworks. 1 Rotate the mode dial to M.
My Camera > Shooting modes T Custom mode 4 Verify the shooting options, and then select Save or Save as. Custom mode lets you create your own shooting modes by customizing options and saving them. Save frequently used option settings as a named Custom Mode, and then use it as your own shooting mode customized for the shooting environment. Use custom mode when you capture photos in various environments, you have preferred shooting settings, or you frequently use preset options in certain conditions.
My Camera > Shooting modes Downloading custom modes You can download various shooting settings (film) to a smart phone and share them with the camera. 1 Connect the camera and a smart phone via Bluetooth. 2 On the smart phone, turn on Samsung Camera Manager. 3 Select Pro Suggest Market. 4 Download a desired film. Selecting custom modes 1 Rotate the mode dial to T. 2 On a pop-up window, select Yes ĺ a mode. You can also press [m], and then select d ĺ Manage Custom Mode ĺ Open ĺ a mode.
My Camera > Shooting modes i Samsung Auto Shot mode When Jump Shot is selected In Samsung Auto Shot, you can capture action photos, such as someone hitting a baseball, making a jumpshot, or passing a preset point. Focus on the subject and start capturing. The camera automatically takes the photo when it detects the jumping subject at its highest point. You can also select and focus on an area that you touch on the screen. 1 Rotate the mode dial to i.
My Camera > Shooting modes When Baseball is selected When Trap Shot is selected The camera automatically takes the photo when it detects a ball at the estimated hitting point that you set by positioning a vertical line on the screen. The camera takes photos continuously when it detects the subject moving in the direction of the arrow at the vertical line that you set on the screen. To position the hitting point, drag the vertical line on the screen, scroll command dial 1 or 2.
My Camera > Shooting modes s Smart mode Option Description In Smart mode, you can capture photos with preset parameters when shooting specific scenes, conditions, or effects. Beauty Face Capture a portrait with options to hide facial imperfections. Landscape Capture still-life scenes and landscapes. 1 Action Freeze Capture subjects moving at high speed. Rich Tones Capture a photo with vibrant colors. Panorama Capture a wide panoramic scene in a single photo.
My Camera > Shooting modes Capturing panoramic photos In Panorama mode, you can capture a wide panoramic scene in a single photo. Panorama mode captures and combines a series of photos to create a panoramic image. 1 Rotate the mode dial to s, and then select Panorama. 2 Press and hold [Shutter] to start shooting. 3 With [Shutter] pressed, slowly move the camera in the direction you selected.
My Camera > Shooting modes Recording a video In Shooting mode, you can record 4K videos (up to 4096X2160) by pressing (Video recording). (p. 189) The camera saves video in HEVC format. When you record a video at 640X480 (MJPEG), the video will be saved in AVI format. To view HEVC files, you must have a device or program with HEVC codecs installed. Sound is recorded via the camera’s microphone. You can set the exposure by adjusting the aperture value and shutter speed for the mode you selected.
My Camera > Shooting modes If you change the shooting angle of the camera suddenly while shooting a movie, the camera may not be able to record images accurately. Use a tripod to minimize camera shake. When formatting a memory card, always format using the camera. When you format a memory card with a capacity of 32 GB or less on the camera, the file system is changed to FAT32. When you format a memory card with a capacity of 64 GB or more, the file system is changed to exFAT.
My Camera > Shooting modes 3D mode You can capture 3D photos or videos with an optional 3D lens. Available shooting options differ compared to other shooting modes. You can select either the 5.9M (3232X1824) or 2.1M (1920X1080) photo size. The video resolution is set to 1920X1080. Videos recorded in 3D may be dark or playback may be jittery. Shooting in low temperatures may result in color distortion in images and may consume more battery power.
My Camera > Shooting modes Available functions by shooting mode For details about shooting functions, see Chapter 2. You can press shortcut buttons to access selected functions as noted. Function Available in Shortcut Focus Peaking (p. 98) P/A/S/M/s/t - OIS (Anti-Shake) (p. 99) P/A/S/M/s*/t - P/A/S/M/s*/t*/3D* f/C Function Available in Shortcut Framing Mode (p. 115) P/A/S/M - Drive (Single/Continuous/ Burst/Timer/Bracketing) (p. 100) Photo Size (p.
Chapter 2 Shooting Functions Learn about the functions you can set in Shooting mode. You can enjoy more customized photos and videos by using the shooting functions.
Shooting Functions Size and Resolution Photo size * Default Icon As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the file size will also increase. Select a low resolution for photos that will be displayed in a digital picture frame or uploaded to the web. To set the size, In Shooting mode, press [m] ĺ b ĺ Photo Size ĺ an option.
Shooting Functions > Size and Resolution Quality * Default Icon Format Description JPEG Fine: Compressed for better quality. Recommended for printing in normal sizes. JPEG Normal: Compressed for normal quality. Recommended for printing in small sizes or for uploading to the web. RAW RAW: Save an unprocessed version of the photo. Recommended for editing after shooting. RAW+JPEG RAW + S.Fine: Save a photo in both the JPEG (S.Fine quality) and RAW format.
Shooting Functions ISO sensitivity The ISO sensitivity value represents the sensitivity of a camera to light. Examples The larger the ISO value, the more sensitive the camera is to light. Consequently, by selecting a higher ISO sensitivity value, you can capture photos in dim or dark places at faster shutter speeds. However, this may increase electronic noise and result in a grainy photo. To set ISO sensitivity, In Shooting mode, press [I] ĺ an option.
Shooting Functions > ISO sensitivity Customizing ISO settings Set to adjust ISO Step, Auto ISO Range, or ISO Expansion. To customize ISO settings, In Shooting mode, press [m] ĺ b ĺ ISO Customizing ĺ an option. Option Description ISO Step You can set the size of ISO sensitivity adjustments to either 1/3 step or 1 step. Auto ISO Range You can set the maximum ISO value the camera will use to set each EV step when you set the ISO to Auto. ISO Expansion You can select ISO 51200.
Shooting Functions OLED Color Set the camera to optimize colors for playback on OLED displays. An OLED display has a wider color reproduction range than a liquid crystal display and produces brighter, natural colors. To set OLED Color, Examples In Shooting mode, press [m] ĺ b ĺ OLED Color ĺ an option.
Shooting Functions White Balance The White Balance function adjusts the color in photos to give them a more natural appearance. You can use this function if color is affected by the type and quality of the light source. For example, fluorescent lamps can give colors in a photo a bluish hue. To offset this effect, select a White Balance option that adjusts the camera‘s settings for the light source. You can also adjust the White Balance by manually adjusting the camera‘s Color Temperature setting.
Shooting Functions > White Balance Customizing preset White Balance options Examples You can also customize preset White Balance options. To customize preset options, Back In Shooting mode, press [m] ĺ b ĺ White Balance ĺ an option ĺ [D] ĺ scroll command dials 1 or 2 or press [D/I/C/F]. Set Reset White Balance : Daylight Auto WB Daylight Fluorescent Daylight Tungsten You can also touch an area on the screen.
Shooting Functions Picture Wizard (photo styles) Picture Wizard lets you apply different photo styles to your photo to create various looks and emotional moods. You can also create and save your own photo styles by adjusting color, saturation, sharpness, contrast, and hue for each style. There is no rule that determines which style is suitable in which conditions. Experiment with different styles and find your own settings.
Shooting Functions Smart Filter Smart Filter lets you apply special effects to your photos. You can select various filter options to create special effects that are difficult to achieve with normal lenses. To set Smart Filter options, In Shooting mode, press [m] ĺ b ĺ Smart Filter ĺ an option. * Default Option Description Off* No effect Vignetting Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras.
Shooting Functions AF mode Learn how to adjust the camera’s focus according to the subjects. You can select the appropriate focus mode for the subject: Single Auto Focus, Continuous Auto Focus, Active Auto Focus, or Manual Focus. The AF function is activated when you press [Shutter] halfway. In the MF mode, you have to rotate the focus ring on the lens to focus manually. In most cases, you can make the camera focus by selecting Single AF.
Shooting Functions > AF mode Single AF Continuous AF Single AF is appropriate for shooting a still subject. When you press [Shutter] halfway, the focus fixes in the focus area. The area turns green when the focus is achieved. While you press [Shutter] halfway, the camera continues to focus automatically. This mode is recommended for shooting action. Depending on the type of lens, auto focus results may differ when you capture photos continuously using Continuous AF.
Shooting Functions > AF mode Active AF Manual focus While you press [Shutter] halfway, the camera automatically detects the subject‘s movements and switches between Single AF and Continuous AF. It fixes the focus on the subject when the subject gets far from the camera (Single AF). It continues to focus automatically when the subject gets closer to the camera (Continuous AF). This mode is recommended for shooting subjects that are moving unpredictably.
Shooting Functions AF area The AF area function changes the positions of the focus area. Selection AF Generally, cameras focus on the nearest subject. When there are multiple subjects, however, unwanted subjects can be in focus. To prevent unwanted subjects from being in focus, change the focus area so that a desired subject is in focus. You can get a clearer and sharper photo by selecting an appropriate focus area. You can set the focus on an area you want.
Shooting Functions > AF area Saving Selection AF position You can set the camera to remember the most recent AF position used by Selection AF and Touch AF before turning the camera off. To set this function, In Shooting mode, press [m] ĺ b ĺ Save Selection AF Position ĺ an option. Multi AF The camera displays a green rectangle in places where the focus is set correctly. The photo is divided into two or more areas, and the camera obtains focus points in each area.
Shooting Functions Face Detection Use Face Detection options to capture a self portrait or a smiling face. To use the face detection function, In Shooting mode, press [m] ĺ b ĺ Face Detection ĺ an option. When your camera detects a face, it tracks the detected face automatically. Depending on the Picture Wizard options, Face Detection may not be effective. When you set manual focus, Face Detection may not be available.
Shooting Functions > Face Detection Smile Shot Wink Shot The camera automatically releases the shutter when it detects a smiling face. The camera automatically releases the shutter 2 seconds after it detects a winking face. When your subject smiles broadly, your camera can detect the smile more easily. Wink for more than 1 second for better detection.
Shooting Functions Touch AF Select or focus on an area that you touch on the screen. Additionally, focus on the subject and capture a photo by touching the screen. To set Touch AF, In Shooting mode, press [m] ĺ b ĺ Touch AF ĺ an option. Available options may differ depending on the shooting conditions. Tracking AF Tracking AF allows you to track and automatically focus on your subject, even when the subject is moving or when you change the shooting composition.
Shooting Functions > Touch AF If you do not select a focus area, the Auto Focus function does not work. Tracking a subject may fail if: - The subject is too small. - The subject moves irregularly. - The subject is backlit or you are shooting in a dark place. - Colors or patterns on the subject and the background are the same. - The subject includes horizontal patterns, such as blinds. - The camera shakes excessively. - You capture photos continuously.
Shooting Functions Focus assist Use various focus assist functions while focusing the camera automatically or manually. Manual focus assist functions are available only with lenses that support manual focus. * Default Option Description Off Do not use the MF Assist function. The focus area is magnified by 5 times when you rotate the focus ring. MF Assist In the manual focus mode, you can enlarge the scene and easily adjust the focus while rotating the focus ring.
Shooting Functions > Focus assist DMF (Direct Manual Focus) AF Release Priority You can adjust the focus manually by rotating the focus ring after achieving focus by half-pressing [Shutter]. Set to capture a photo when focus is achieved, or to select accuracy priority or shooting speed priority. To set the DMF function, In Shooting mode, press [m] ĺ b ĺ DMF ĺ an option. To set AF Release Priority options, In Shooting mode, press [m] ĺ b ĺ AF Release Priority ĺ an option.
Shooting Functions > Focus assist Focus Peaking In the manual focus mode, the color you selected appears on the focused subject to help you focus while rotating the focus ring. To set Focus Peaking options, In Shooting mode, press [m] ĺ b ĺ Focus Peaking ĺ an option. * Default Option Description Level Set a sensitivity for detecting the focused subject. (Off, High, Normal*, Low) Color Set a color to appear on the focused subject.
Shooting Functions Optical Image Stabilization (OIS) Use the Optical Image Stabilization (OIS) function to minimize camera shake. OIS may not be available with some lenses. Camera shake tends to occur in dark locations or when shooting indoors. Under these conditions, the camera uses slower shutter speeds to increase the amount of light it takes in, which can result in a blurry photo. You can prevent this by using the OIS function.
Shooting Functions Drive (shooting method) You can set the shooting method, such as Continuous, Burst, Timer, or Bracketing. Select Single to capture one photo at a time. Select Continuous Normal, Continuous High, or Burst to shoot fast moving subjects. Select AE Bracket, WB Bracket, P Wiz Bracket, or Depth Bracket to adjust exposure, White Balance, apply Picture Wizard effects, or capture photos with different depths of field.
Shooting Functions > Drive (shooting method) Continuous Burst Continuously capture photos while you are pressing [Shutter]. You can capture up to 4 photos (Continuous Normal) or 9 photos (Continuous High) per second. Consecutively capture up to 10 shots per second (3 seconds), 15 shots per second (2 seconds), or 30 shots per second (1 second) when you press [Shutter] once. Recommended for shooting the rapid motion of fast moving subjects such as racing cars.
Shooting Functions > Drive (shooting method) Timer Auto Exposure Bracketing (AE Bracket) Capture a photo after a specified time. You can also set the shooting interval, number of shots, and shooting time. When you press [Shutter], the camera captures 3 consecutive photos: the original and two more with different exposure settings. Use a tripod to prevent blurry photos as the camera captures three photos continuously. You can adjust the settings in the Bracket Settings menu.
Shooting Functions > Drive (shooting method) White Balance Bracketing (WB Bracket) Picture Wizard Bracketing (P Wiz Bracket) When you press [Shutter], the camera captures 3 consecutive photos: the original and two more with different White Balance settings. The original photo is captured when you press [Shutter]. The other two are automatically adjusted according to the White Balance you have set. You can adjust the settings in the Bracket Settings menu.
Shooting Functions > Drive (shooting method) Depth Bracketing When you press [Shutter], the camera captures 3 consecutive photos, each with a different depth of field by adjusting the aperture value. Use a tripod to prevent blurry photos as the camera captures three photos continuously. You can adjust the settings in the Bracket Settings menu. * Default Option Description AE Bracket Set the exposure interval. (-/+ 0.3 EV*, -/+ 0.7 EV, -/+ 1.0 EV, -/+ 1.3 EV, -/+ 1.7 EV, -/+ 2.0 EV, -/+ 2.3 EV, -/+ 2.
Shooting Functions Interval Capture Set the shooting interval, the number of shots, and shooting start time. Use this function to capture photos at regular intervals during an event, such as a lunar eclipse or a sunrise. To capture an interval shot, In Shooting mode, press [m] ĺ b ĺ Interval Capture ĺ set a shooting interval, the number of shots, and shooting start time ĺ Start Interval Capture ĺ wait for shooting to begin at the time you set.
Shooting Functions Flash To capture a realistic photo of a subject, the amount of light should be constant. When the light source varies, you can use a flash and supply a constant amount of light. Select appropriate settings according to a light source and a subject. To set flash options, Icon In Shooting mode, press [m] ĺ b ĺ Flash ĺ an option. Description Off: The flash is off.
Shooting Functions > Flash Reducing the red-eye effect Adjusting the flash intensity When you capture a photo of a person in the dark using the flash, a red glow may appear in their eyes. To reduce this red-eye effect, select Auto Red-eye or Fill-in Red. When the flash is on, adjust the flash intensity +/-2 levels. In Shooting mode, select [m] ĺ b ĺ Flash ĺ an option ĺ [D] ĺ scroll command dial 1 or 2 or press [C/F] to adjust the flash intensity.
Shooting Functions > Flash You can also drag the slider or touch / to adjust the intensity. Adjusting the flash intensity may not be effective when: - The subject is too close to the camera. - You set a high ISO sensitivity. - The exposure value is too big or too small. - It is too bright or too dark. In some shooting modes, you cannot use this function. If you attach an intensity-adjustable external flash to the camera, the intensity settings of the flash will be applied.
Shooting Functions > Option Flash Description A-TTL: In the A-TTL (Advanced Through The Lens) mode, Flash Mode the camera measures the light reflected by the subject through the lens. Then, it calculates the optimum exposure based on the exposure value and shutter speed. Manual Flash: The flash emits the full amount of light or the flash intensity can be adjusted manually. Multi Flash: When you press [Shutter], the flash fires multiple times based on the number you have set.
Shooting Functions > Flash * Default Option Description Use Wireless Flash Set to use wireless sync. (Off*, On) Channel Select channels for wireless sync. There are four remote channels available to allow multiple remote systems to operate at the same time. Master and slave flash units, in the same remote system, must be set to the same channel. (Ch. 1, Ch. 2, Ch. 3, Ch.
Shooting Functions Metering The metering mode refers to the way in which a camera measures the quantity of light. The camera measures the amount of light in a scene, and in many of its modes, uses the measurement to adjust various settings. For example, if a subject looks darker than its actual color, the camera captures an overexposed photo of it. If a subject looks lighter than its actual color, the camera captures an underexposed photo of it.
Shooting Functions > Metering Center-weighted Spot The Center-weighted mode calculates a broader area than the Spot mode does. It sums up the amount of light in the center portion of the shot (60–80 %) and that of the rest of the shot (20–40 %). It is recommended for situations where there is a slight difference in brightness between a subject and its background or where the area around a subject is large compared to the overall composition of the photo.
Shooting Functions > Metering Measuring the exposure value of the focus area When this function is turned on, the camera automatically sets an optimal exposure by calculating the brightness of the focus area. This function is only available when you select Spot metering or Multi metering, and Selection AF. To set this function, In Shooting mode, press [m] ĺ b ĺ Link AE to AF Point ĺ an option.
Shooting Functions Dynamic Range This function automatically corrects for the loss of bright or dark detail that can occur due to shading differences in the photo. * Default Icon Description Off*: Dynamic Range is off. To set Dynamic Range options, In Shooting mode, press [m] ĺ b ĺ Dynamic Range ĺ an option. Smart Range+: Corrects for the loss of bright or dark detail. HDR: Capture several photos with different exposures, and then combine them to automatically create a single image.
Shooting Functions Exposure compensation The camera automatically sets the exposure by measuring the levels of light from the photo’s composition and the position of a subject. If the exposure set by the camera is higher or lower than you expected, you can adjust the exposure value manually. The exposure value is adjustable in ±5 increments. The camera displays the exposure warning in red for each step beyond ±5 range. When recording a video, the exposure value is adjustable in ±3 increments.
Shooting Functions > Exposure compensation Using the brightness adjustment guide Adjust the brightness using the selected area as a reference. The brightness of the selected area is displayed as a value to help you to conveniently adjust the brightness. To adjust the brightness, In Shooting mode, press [m] ĺ b ĺ Brightness Adjustment Guide ĺ On ĺ locate on the screen in the reference area ĺ press [a] ĺ use command dials 1 and 2, or [C/F], or drag the slider to adjust the brightness.
Shooting Functions Exposure/Focus lock If you cannot achieve an appropriate exposure because of a strong light/ dark contrast between the subject and the background, or you want to capture a photo in which the subject is out of the auto focus area, lock the focus or exposure and then capture a photo. 4 Half-press [Shutter] to achieve focus, and then press [Shutter] to take a photo.
Shooting Functions Exposure/Focus separation Separate the exposure area and the focus area or merge them again. This feature is available only when Touch AF is set to Touch AF. 1 2 Drag to the exposure area. The focus area and the exposure area will be separated. On the screen, touch an area to focus on it. Touch and hold each area to lock the focus or exposure setting.
Shooting Functions Video functions The functions available for video are explained starting below. When Video Out is set to NTSC * Default Icon Movie size Set the movie size. * To set movie size options, In Shooting mode, press [m] ĺ g ĺ Movie Size ĺ an option. Size Recommended for 4096X2160 (24p) View on a 4K UHDTV. 3840X2160 (30p) View on a 4K UHDTV. 1920X1080 (60p) View on a Full HDTV. (Videos recorded with this option may not play on some HDTVs or smart phones that do not support 60p.
Shooting Functions > Video functions When Video Out is set to PAL Movie quality * Default Icon * Set the Movie quality. Size Recommended for 4096X2160 (24p) View on a 4K UHDTV. 3840X2160 (25p) View on a 4K UHDTV. To set movie quality options, In Shooting mode, press [m] ĺ g ĺ Movie Quality ĺ an option. 1920X1080 (50p) View on a Full HDTV. (Videos recorded with this option may not play on some HDTVs or smart phones that do not support 50p.
Shooting Functions > Video functions Bit rates for movie sizes File format Movie Size 4K 4096X2160 UHD 3840X2160 FHD Bit rate (HQ) Mbit/s Bit rate (Normal) Mbit/s Frame rate Sensor output 36 29 24p 24p 40 32 30p 29.97p 40 32 25p 25.00p 16 13 60p 59.94p 16 13 50p 50.00p 8 6.4 30p 29.97p 8 6.4 25p 25.00p 7 5.5 24p 24.00p 8.2 6.6 60p 59.94p 8.2 6.6 50p 50.00p 4 3.3 30p 29.97p 4 3.3 25p 25.00p 3 2.4 60p 59.94p 3 2.4 50p 50.00p 1.5 1.
Shooting Functions > Video functions Fast/Slow Movie AF Responsiveness Set the playing speed of a video. Set the delay time for the focus to automatically change during video recording. When a new subject enters the frame, the camera shifts the focus slowly if the responsiveness is set to low. If the responsiveness is set to high, the camera shifts the focus quickly. To set playing speed options, In Shooting mode, press [m] ĺ g ĺ Fast/Slow Movie ĺ an option. * Default Icon Description x0.
Shooting Functions > Video functions AF Shift Speed Fader Set how fast the auto focus function operates during video recording. A fast shift speed is useful for capturing action shots, such as sporting events. A slow shift speed enables smooth changes of focus depending on the subject. Add dramatic effects to your videos. Set the fade in option to gradually fade the video in at the start of a scene. Set the fade out option to gradually fade the video out at the end of a scene.
Shooting Functions > Video functions Voice Mic Level Sometimes, a muted video is more appealing than one with sound. Turn Voice off to record a muted video. Set a mic level appropriate for the shooting conditions. To set voice options, In Shooting mode, press [m] ĺ g ĺ Voice ĺ an option. To set the mic level, In Shooting mode, press [m] ĺ g ĺ Mic Level ĺ scroll command dials 1 and 2 or press [C/F] to adjust the mic level ĺ touch Set.
Chapter 3 Playback/Editing Learn about how to play back and edit photos and videos.
Playback/Editing Searching and managing files Learn how to view photo and video thumbnails and how to protect or delete files. If you perform no operations for a while, information and icons on the screen disappear. When you press a button or touch the screen, they will reappear. Viewing image thumbnails To search for photos and videos, change to the thumbnail view. The thumbnail view displays multiple images at a time so that you can easily look for items you want to find.
Playback/Editing > Searching and managing files Viewing files by category 1 In the thumbnail view, press [m] ĺ z ĺ Filter ĺ a category. You can also touch the current category name to open the option list. * Default Option Description All* View files normally. Date View files by the date they were saved. Type View files by the file type. 2 Select a list to open it. 3 Select a file to view it. 4 Touch to return to the previous view.
Playback/Editing > Searching and managing files Viewing continuous and burst shots View continuous and burst shots from a photo bundle. Select a photo bundle to play back all photos in the bundle automatically. If you delete a photo bundle, all photos in the photo bundle will be deleted. The photos in a photo bundle are saved as an individual photo file on the memory card; a separate folder is not created. You can choose to view continuous shots as a bundle or view them separately.
Playback/Editing > Searching and managing files Lock/Unlock all files Protecting files Protect your files from accidental deletion. Lock or unlock all files. 1 In Playback mode, press [m] ĺ z ĺ Protect ĺ Multiple Protect. 1 In Playback mode, press [m] ĺ z ĺ Protect ĺ Protect All. 2 Scroll command dial 2 or press [C/F] to move to a file, and then select the file by pressing [o]. 2 Select an option. 3 Press [a]. You cannot delete or rotate a protected file.
Playback/Editing > Searching and managing files Deleting files 2 Delete files in Playback mode and secure more space on your memory card. Protected files can be deleted once the protection is removed. Deleting a single file You can select a single file and delete it. 1 In Playback mode, select a file, and then press [n]. 2 When the pop-up message appears, select Yes. Deleting multiple files You can select multiple files and delete them.
Playback/Editing Viewing photos Enlarging a photo You can enlarge photos when viewing them in Playback mode. You can also use the Trim function to extract the portion of the image displayed on the screen and save it as a new file. Full Image Crop Magnification (The maximum magnification may differ by resolution.) Magnified area Scroll command dial 1 to the right to enlarge a photo. (Scroll command dial 1 to the left to reduce a photo.) To Do this Move magnified area Press [D/I/C/F].
Playback/Editing > Viewing photos Viewing a slide show 4 Press [m]. You can view photos in a slide show and apply various effects. 5 Select Start Slide Show. 6 View the slide show. 1 In Playback mode, press [m]. 2 Select z ĺ Slide Show Options. 3 Select a slide show effect option. Press [o] to pause. Press [o] again to resume. Press [m] to stop the slide show and return to Playback mode. Skip to step 4 to start a slide show with no effects.
Playback/Editing > Viewing photos Viewing the overexposure guide Auto rotating Make the overexposed areas in a photo blink. With Auto Rotate on, the camera automatically rotates photos you have captured vertically so they fit the screen horizontally. To view the overexposure guide, In Playback mode, press [m] ĺ z ĺ Overexposure Guide ĺ an option. Viewing interval shots View photos that are captured with the Interval Capture function.
Playback/Editing Playing videos In Playback mode, you can play a video, capture an image from a video, or crop a video to save as another file. Stop Capture Scanning backward or forward To scan backward or forward through a video file while it is playing, use one of the following methods. Touch . Each time you touch the icon, you change the scan speed in this order: 2X, 4X, 8X. Press [C/F]. Each time you press the button, you change the scan speed in this order: 2X, 4X, 8X.
Playback/Editing > Playing videos Adjusting the brightness of a video Adjusting the volume of a video Adjust the brightness of a video while playing it. Adjust the volume of a video while playing it. To adjust the brightness of a video, Touch the left half of the display ĺ drag upward or downward. Stop Capture To adjust the volume of a video, Touch the right half of the display ĺ drag upward or downward.
Playback/Editing > Playing videos Trimming a video during playback 1 In Playback mode, scroll to a video, and then press [m]. 2 Select Trim Movie. 3 Press [o] or touch to start playing the video. 4 Press [o] or touch trimming to begin. at the point where you want the 5 Press [f] or touch Start Point. 6 Press [o] or touch to resume playing the video. 7 Press [o] or touch trimming to end. at the point where you want the 8 Press [f] or touch End Point.
Playback/Editing Editing photos Perform photo editing tasks, such as resizing or rotating. Edited photos are saved as new files under different file names. Photos captured in some modes cannot be edited with the Image Edit function. To edit images, In Playback mode, scroll to a photo, and then press [m] ĺ z ĺ Edit Image ĺ an option. Cropping a photo 1 Touch 2 Drag the sides of the box to adjust the size of the crop area. 3 Drag the box to move the location of the crop area.
Playback/Editing > Editing photos Rotating a photo Resizing photos 1 Touch Change the size of a photo and save it as a new file. 2 Touch an option. ĺ . Cancel Done 1 Touch 2 Touch an option. ĺ . Cancel Done Rotate : Right 90˚ Resize : 13.9M (3:2) 3 Press [o] or touch Done. 4 Touch to save. You can also rotate a photo in Playback mode by pressing [m], and then selecting z ĺ Rotate ĺ a desired option. The camera will overwrite the original file. 3 Press [o] or touch Done.
Playback/Editing > Editing photos Adjusting your photos 3 You can correct captured photos by adjusting the brightness, contrast, or color. 1 Touch 2 Touch an adjusting option. . If you selected Icon Scroll command dial 1 or 2 or press [C/F] to adjust the option. You can also drag the slider or touch +/- to adjust the option. 4 Press [o] or touch Done. 5 Touch to save. (Auto adjustment), skip to step 4. Description Original (Reset to the original image.
Playback/Editing > Editing photos Applying Smart Filter effects Apply special effects to your photos. 1 Touch , and then touch an option. Cancel Done Smart Filter : Vignetting Option Description Original No effect Vignetting Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Miniature (H) Apply a tilt-shift effect to make the subject appear in miniature. The top and bottom of the photo will be blurred.
Chapter 4 Connecting & Transferring Learn how to share photos or videos and use various features.
Connecting & Transferring Connecting to a smart phone Using the NFC Feature Place a smart phone’s NFC antenna near the camera’s NFC tag to connect the camera to the smart phone. You can also transfer files to an NFCenabled device in Playback mode. Using NFC features in Playback mode (Photo Beam) In Playback mode, the camera transfers the current files to the smart phone automatically when you place the two devices close to each other while they are connected via Bluetooth.
Connecting & Transferring > Connecting to a smart phone Using the GPS Geo Tagging Feature To save GPS information when you take a photo using the camera, connect the camera and smart phone via Bluetooth. Then, activate the GPS feature on the smart phone. Sending files to a smart phone You can use the MobileLink feature to easily send photos to your smart phone. The MobileLink feature is supported by smart phones or tablets running the Android OS or iOS.
Connecting & Transferring > 1 Connecting to a smart phone In Shooting mode, press [R]. 4 You can also press and hold [R] to launch the MobileLink feature The smart phone can connect to only one camera at a time. directly. 2 Touch If the Wi-Fi Privacy lock is enabled and Wi-Fi is connected, enter the PIN displayed on the camera into the smart phone. . If the pop-up message that prompts you to download the 5 application appears, select Next.
Connecting & Transferring > Connecting to a smart phone Controlling the camera remotely with a smart phone 1 In Shooting mode, press [R]. 2 Touch Use the Remote Viewfinder feature on your smart phone to control your camera and remotely capture a photo or record video. If the pop-up message that prompts you to download the application appears, select Next.
Connecting & Transferring > 5 Connecting to a smart phone On the camera, allow the smart phone to connect to your camera or confirm the registration request. 8 Touch If the smart phone has been connected to your camera before, it is 9 On the smart phone, touch and hold release it to capture the photo. connected automatically. If the pop-up message that prompts you to set the auto time setting appears, select Yes to sync the camera’s date and time to the smart phone’s. (p.
Connecting & Transferring > Connecting to a smart phone Using a smart phone as a remote shutter release Use the Bluetooth Shutter function in Samsung Camera Manager on the smart phone to use the smart phone as a remote shutter for the camera. This feature is supported by smart phones running the Android OS. We recommend that you use the latest version. This feature is not available for iOS devices. You should install Samsung Camera Manager on your phone or device before using this feature.
Connecting & Transferring > Connecting to a smart phone Saving files to a smart phone automatically 1 In Shooting mode, touch . You can also press [R], and then select When you capture a photo with your camera, the photo is saved to a smart phone automatically using the Quick Transfer feature. . If the pop-up message that prompts you to download the application appears, select Next. The Quick Transfer feature is supported by smart phones or tablets running the Android OS.
Connecting & Transferring > 4 Connecting to a smart phone On the camera, confirm the smart phone‘s registration request. If the smart phone has been connected to your camera before, it is connected automatically. The Quick Transfer icon on the camera’s screen will be changed to an icon that shows the connection status ( ). If the pop-up message that prompts you to set the auto time setting appears, select Yes to sync the camera’s date and time to the smart phone’s. (p.
Connecting & Transferring Sending photos via email Connect to a network and send stored photos on the camera via email. Select Refresh to refresh the list of connectable APs. Select Add a wireless network to add an AP manually. When you add an AP manually, the AP name must be in English. Connecting to a WLAN Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Connecting & Transferring > Sending photos via email Setting network options Manually setting the IP address 1 In the Wi-Fi Setting screen, move to an AP, and then press [F] or touch . 1 In the Wi-Fi Setting screen, move to an AP, and then press [F] or touch . 2 Select each option, and then enter the required information. 2 Select IP Setting ĺ Manual. 3 Select each option, and then enter the required information. Option Description Network Password Enter the network password.
Connecting & Transferring > Sending photos via email Network connection tips You cannot connect your camera to a network and a TV simultaneously. You must insert a memory card to use the Wi-Fi features. Connecting to a network may incur additional charges. Costs will vary The quality of the network connection will be determined by the AP. The further the distance between your camera and the AP, the longer it will take to connect to the network.
Connecting & Transferring > Sending photos via email Entering text Learn how to enter text. The icons in the table let you move the cursor, change the case, etc. Touch a key to enter it. Icon Description Change case. Switch between Symbol/Number mode and the normal mode. Touch to enter a space. Change the input language by dragging it to the left or the right. Save the displayed text. Delete the last letter.
Connecting & Transferring > Sending photos via email 4 Sending photos via email Select the Receiver box, enter an email address, and then touch . You can send photos stored on the camera via email. For information about entering text, refer to “Entering text“. (p. 153) To use an address from the list of previous recipients, select 1 Select In Playback mode, touch . In thumbnail view, select ĺ a file, and then press [f]. You can to add additional recipients.
Connecting & Transferring > Sending photos via email Even if a photo appears to have transferred successfully, errors with the recipient’s email account may cause the photo to be rejected or recognized as spam. You may not be able to send an email if no network connection is available or if your email account settings are incorrect. You cannot send an email if the combined file sizes exceed the 7 MB.
Connecting & Transferring > 5 6 Sending photos via email Select the Email box, enter your email address, and then touch . 3 Select Save to save your changes. 4 When the pop-up appears, select OK. 5 Enter a 4-digit password. 6 Enter the password again. 7 When the pop-up appears, select OK. Select Setting Password ĺ On. To deactivate the password, select Off. To delete your information, select Reset. Setting an email password In the email menu, you can set the email password.
Connecting & Transferring > Sending photos via email Changing the email password In the email menu, you can change the email password. For information about entering text, refer to “Entering text“. (p. 153) 1 In Playback mode, touch . The camera will automatically attempt to connect to a WLAN via the most recently connected AP device. If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p. 150) 2 Press [f]. 3 Select Change Password.
Connecting & Transferring Viewing photos or videos on a TV Use the Wi-Fi feature or USB cable to play back files from the camera on a TV. To use the Wi-Fi feature and connect the camera wirelessly, the TV must support home networking functions. 4 Connect the camera to the TV. If you select , choose a TV to connect to from the list on the camera. If you select Connecting wirelessly 1 In Playback mode, touch 2 Select or . . If the guide message appears, select OK.
Connecting & Transferring > Viewing photos or videos on a TV You can share up to 1,000 recent files. On the TV, you can view only photos or videos captured with your camera. The range of the wireless connection between your camera and a TV may vary depending on the specifications of the AP. If the camera is connected to two TVs, playback may be slower. Photos or videos will be shared in their original sizes. You can only use this feature with a TV that supports home networking features.
Connecting & Transferring > Viewing photos or videos on a TV Connecting via cable Play back photos or videos by connecting your camera to an HDMIsupported TV using an optional HDMI cable. 6 View photos or play videos using the camera buttons. If your TV supports Anynet+(CEC), you can connect the camera to the TV with an HDMI cable using the Anynet+(CEC) method. The Anynet+(CEC) functions allow you to control connected devices using the TV remote control.
Connecting & Transferring > Viewing photos or videos on a TV Viewing files on a 3D TV 6 Press [I] again to switch to 2D Mode. You can view photos or videos captured in 3D mode on a 3D TV. In Shooting or Playback mode, press [m] ĺ q ĺ HDMI Output ĺ an option. (p. 179) 7 2 Turn off your camera and 3D TV. 8 3 Connect your camera to your 3D TV with the optional HDMI cable. 1 Move to a 3D file, and then press [I] to switch to 3D mode. Turn on your TV’s 3D function.
Connecting & Transferring Connecting to a computer Using the Auto Backup feature Using Auto Backup for photos or videos You can send photos or videos that you captured with the camera to a PC wirelessly. 1 In Playback mode, select a file, and then touch ĺ . In thumbnail view, you cannot use the Auto Backup feature. If the pop-up message that prompts you to download the application appears, select Next.
Connecting & Transferring > 3 Connecting to a computer Select OK. To cancel sending, select Cancel. You cannot select individual files to backup. This function backs up only new files on the camera. The backup’s progress will be shown on the PC monitor. When the transfer is completed, the camera will turn off automatically in approximately 30 seconds. Select Cancel to return to the previous screen and prevent the camera from turning off automatically.
Connecting & Transferring > Connecting to a computer Connecting the camera as a removable disk Transfer files on a memory card to your computer by connecting the camera to the PC. Transferring files to your Windows OS computer You can connect the camera to your computer as a removable disk. Open the removable disk and transfer files to your computer. 1 Turn off the camera. 2 Connect the camera to your computer with the USB cable. 3 Turn on the camera.
Connecting & Transferring > Connecting to a computer Disconnecting the camera (for Windows 7) Transferring files to your Mac OS When the camera is connected to the computer as a removable disk, follow the instructions below to disconnect the camera. With Windows 8 and Windows 8.1, the methods for disconnecting the camera are similar. 1 Mac OS 10.7 or later is supported. Ensure that no data is being transferred between the camera and the computer. 1 Turn off the camera.
Connecting & Transferring > 3 Connecting to a computer Turn on the camera. The computer recognizes the camera automatically and displays a removable disk icon. 4 On your computer, open the removable disk. 5 Select the files you want, and then drag or save them to your computer.
Chapter 5 Camera settings menu Learn about the user settings and general settings menu. You can adjust the settings to better suit your needs and preferences.
Camera settings menu User settings You can set the user environment with these settings. To set user options, In Shooting mode, press [m] ĺ d ĺ an option. RAW Compression Set the type of compression for RAW files. * Default Available items and their order may differ depending on shooting conditions. Option Description Lossless Compression* RAW files are compressed without data loss. Normal Compression RAW files are compressed with negligible effect on image quality.
Camera settings menu > User settings Color Space The color space option allows you to select methods for representing colors. Digital imaging devices such as digital cameras, monitors, and printers have their own color ranges, referred to as color spaces. Adobe RGB * Default Option Description sRGB* sRGB (Standard RGB) is an international specification that defines the color space created by the IEC (International Electrotechnical Commission).
Camera settings menu > User settings Distortion Correct Grid Line You can correct distortion that can be caused by lenses. This function may not be available with some lenses. Select a guide to help you compose a scene. * Default Option Description Off* Disable grid lines. User Display 4X4 Set a 4 X 4 grid. You can add or remove shooting information from the display. 3X3 Set a 3 X 3 grid. Cross Set the grid lines as cross hairs. Diagonal Set the grid lines to cross diagonally.
Camera settings menu > User settings Center Marker Key Mapping Set to display a cross-shaped center marker in the center of the screen. Use the center marker to set the vertical and horizontal levels. You can set the size of the center marker or apply effects to it. You can change the function assigned to the Custom button, the AEL button, the EV button, or command dials 1 and 2. * Default Option Description Display Set to turn the center marker on or off.
Camera settings menu > User settings AEL * Default Set the function for the AEL button. You can change the function assigned to the button to focus lock, exposure lock, or other shooting functions. The AEL and AFL functions save the exposure value or focus area respectively when you press [a]. The function executed by half-pressing [Shutter] varies according to the function assigned to [a]. Option Description FEL Hold Keep the flash intensity lock function on after shooting.
Camera settings menu > User settings * Default * Default Option Description Option Description Flash Set flash options according to the shooting conditions. Touch Operation Set to enable touch operation in Shooting mode. intelli-Zoom Zoom in on a subject with less degradation of photo quality than the Digital zoom. Dynamic Range Select an option to correct brightness differences caused by shadows in the photo.
Camera settings menu > User settings Command Dial iFn Setting Assign the functions that are adjusted when command dials 1 or 2 are rotated. * Default Adjust the iFn settings for an i-Function lens.
Camera settings menu > User settings Lens Button Speed Settings Auto Self Shot Set the zoom speed for the Power Zoom lens’ buttons at either fast, medium, or slow. At fast speed, zoom noise increases and can be recorded in videos. This function is available only when you attach the Power Zoom lens. Set to enter Self Shot mode automatically when you flip the display upward. In Self Shot mode, the timer (2 seconds), face detection, and beauty face options are automatically activated.
Camera settings menu > User settings E-Shutter MobileLink/NFC Image Size * Default Option Description Off* Set to use the mechanical shutter. On Set to use the electronic shutter curtain first and the mechanical curtain second. This feature is available only when you attach a Samsung lens using a Samsung NX mount. We recommend that you use the electronic shutter to minimize camera shake when using a telephoto lens or taking a close-up photo.
Camera settings menu Setting Learn to configure your camera’s settings. To set Setting options, * Default Item Description Quick View Set the Quick View time length–the amount of time the camera displays a photo immediately after you capture it. Select Hold+Focus Zoom to display the image after shooting with the focus area enlarged. (Off*, Hold+Focus Zoom, Hold, 1 sec, 3 sec, 5 sec) In Shooting or Playback mode, press [m] ĺ q ĺ an option.
Camera settings menu > Setting * Default Item Item Description Set power shut off time. The camera shuts off if you do not use it within the time you set. (30 sec, 1 min*, 3 min, 5 min, 10 min, 30 min) Language Set a language the camera shows on the display. Date and Time Set date, time, date format, and time zone.
Camera settings menu > Setting * Default Item Description HDMI Output When you connect the camera to an HDMI-supported TV with an HDMI cable, you can change the resolution of the image. NTSC: Auto*, 1920 X 1080p, 1280 X 720p, 720 X 480p, 720 X 576p (activates only when PAL is selected) Set the method of creating file names. Standard*: SAM_XXXX.JPG (sRGB)/ _SAMXXXX.JPG (Adobe RGB) Date: - sRGB files - MMDDXXXX.JPG.
Camera settings menu > Setting * Default Item Description * Default Item Format the memory card. Formatting deletes all existing files including protected files. (No*, Yes) Format Bluetooth Errors can occur if you use a memory card formatted by another brand of camera, a memory card reader, or a computer. Please format memory cards in the camera before using them to capture photos. Set to require a PIN when connecting the camera and a smart phone. PIN: Enter a PIN before connecting.
Camera settings menu > Setting * Default Item Description * Default Item Camera Menu*: Return the setup menu and shooting Reset options to the factory defaults. Key Mapping: Return the custom button functions to the factory defaults. C Mode: Return the T mode settings to the factory defaults. Bluetooth/Wi-Fi: Return the connection history, ID, and password of the Bluetooth and Wi-Fi functions to the factory defaults. All: Return all settings to the factory defaults.
Chapter 6 Appendix Get information about error messages, camera maintenance, using programs on a computer, firmware updates, troubleshooting tips, specifications, and glossary terms.
Appendix Error messages When the following error messages appear, try these remedies. Error messages Suggested remedies Lens is locked The lens is locked. Rotate the lens counterclockwise until you hear a click. (p. 54) Card Error Turn off the camera, and then turn it on again. Remove the memory card and insert it again. Format the memory card. Low Battery Insert a charged battery or recharge the battery. No Image File. Capture photos or insert a memory card that contains photos.
Appendix Maintaining the camera Cleaning the camera Camera lens and display Use a brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of lens cleaning paper and wipe gently. Image sensor Depending on different shooting conditions, dust may appear in photos because the image sensor is exposed to the external environment. This problem is normal, and the exposure to dust occurs in everyday use of the camera.
Appendix > Maintaining the camera Using or storing the camera Using on beaches or shores Protect your camera from sand and dirt when you use it on beaches or in Inappropriate places to use or store the camera Avoid exposing the camera to very cold or very hot temperatures. Avoid using your camera in areas with extremely high humidity, or other similar areas. Your camera is not waterproof. Do not handle the battery, adapter, or memory card with wet hands.
Appendix > Maintaining the camera Using the camera with caution in the humid environments When you move the camera from a cold environment to a warm one, condensation can form on the lens or internal components of the camera. In this situation, turn off the camera and wait for at least 1 hour. If condensation forms on the memory card, remove the memory card from the camera and wait until all moisture has evaporated before reinserting it. Other precautions Do not swing your camera by the strap.
Appendix > Maintaining the camera About memory cards Memory card adapter Supported memory cards This product supports SD (Secure Digital), SDHC (Secure Digital High Capacity), SDXC (Secure Digital eXtended Capacity), microSD, microSDHC, or microSDXC memory cards. Terminal Memory card To use micro memory cards with this product, a PC, or a memory card reader, insert the card into an adapter.
Appendix > Maintaining the camera Memory card capacity The memory capacity may differ depending on the type of scenes you shoot and the shooting conditions. These capacities are based on a 4 GB SD card. Quality Super Fine Fine Normal RAW (Normal Compression) 28M (6480X4320) 256 417 809 134 84 63 71 76 13.9M (4560X3040) 475 815 1,270 - - 73 79 81 7.
Appendix > Maintaining the camera Size Video Quality HQ Normal 4096X2160 (24p/NTSC, PAL) Approx. 14' 35" Approx. 18' 15" 3840X2160 (30p/NTSC, 25p/PAL) Approx. 13' 6" Approx. 16' 22" 1920X1080 (60p/NTSC, 50p/PAL) Approx. 32' 30" Approx. 40' 41" 1920X1080 (30p/NTSC, 25p/PAL) Approx. 64' 4" Approx. 80' 16" 1920X1080 (24p/NTSC, PAL) Approx. 72' 55" Approx. 91' 23" 1920X1080 (15p/NTSC, 12.5p/PAL)* Approx. 84' 36" Approx. 106' 5" 1280X720 (60p/NTSC, 50p/PAL) Approx. 62' 5" Approx.
Appendix > Maintaining the camera Cautions when using memory cards Avoid exposing memory cards to very cold or very hot temperatures (below 0 °C/32 °F or above 40 °C/104 °F). Extreme temperatures can cause memory cards to malfunction. Insert a memory card in the correct direction. Inserting a memory card in the wrong direction may damage your camera and memory card. Do not use memory cards that have been formatted by other cameras or by a computer. Reformat the memory card with your camera.
Appendix > Maintaining the camera About the battery Avoid storing or using the battery in hot, humid places, such as spas or Use only Samsung-approved batteries. Do not rest the camera on flammable surfaces, such as bedding, carpets, or shower enclosures. electric blankets for a prolonged period. When the camera is switched on, do not leave it in any confined space for a prolonged period.
Appendix > Maintaining the camera Battery life Notes about using the battery Shooting mode Average time/Number of photos Photos Approx. 185 min./Approx. 370 photos Videos Approx. 115 min. (Record videos at 1920X1080 (60p)) Avoid exposing batteries to very cold or very hot temperatures (below 0 °C/32 °F or above 40 °C/104 °F). Extreme temperatures can reduce the charging capacity of your batteries.
Appendix > Maintaining the camera Battery precautions Protect batteries, chargers, and memory cards from damage. Prevent batteries from making contact with metal objects, as this can create a connection between the + and – terminals of your battery and lead to temporary or permanent battery damage and may cause a fire or electric shock. Notes about charging the battery If the status lamp is off, ensure that the battery is inserted correctly.
Appendix > Maintaining the camera Notes about charging with a computer connected Use only the provided USB cable. The battery may not charge when: - You use a USB hub. - Other USB devices are connected to your computer. - You connect the cable to the port on the front side of your computer. - The USB port of your computer does not support the power output standard (5 V, 500 mA). Handle and dispose of batteries and chargers with care Never dispose of batteries in a fire.
Appendix Using programs on a PC You can view and edit files using the provided programs. You can also send the files to a PC wirelessly. 3 Turn on the camera. 4 Install i-Launcher on the PC. OS How to Install Windows When the pop-up window prompts you to install i-Launcher, select Yes. If the pop-up window does not appear, select My Computer ĺ i-Launcher ĺ iLinker.exe. If a pop-up window prompting you to run iLinker.exe appears, run it first.
Appendix > Using programs on a PC Requirements for Windows OS Item Requirements CPU Intel® 3rd Gen. i5 3.4 GHz or higher (or equivalent AMD processor) RAM Minimum 1 GB RAM OS Windows 7, Windows 8, Windows 8.1 Hard disk capacity 400 MB (1 GB or higher recommended) Others USB 2.0 port * Full HD is supported only on 32-bit editions. .NET Framework 4.0 or above is supported by Windows 7. The requirements on this page and the following pages are recommendations only.
Appendix > Using programs on a PC Using i-Launcher Available programs i-Launcher allows you to update the firmware of the camera or the lens, or download the User Manual. It also allows you to download and install Samsung Movie Converter, Samsung DNG Converter, PC Auto Backup, Samsung RAW Converter, and the Power Media Player program. Item Description Software Update Download the firmware of the camera body or lens. For information about updating the firmware, refer to page 200.
Appendix > Using programs on a PC Requirements Item PC Auto Backup Samsung Movie Converter Power Media Player Samsung DNG Converter Item Requirements Windows Windows 7/8/8.1 Intel Pentium/AMD Athlon processor-based PC or compatible computer (Core 2 Quad or later is recommended) 1 GB or higher is recommended XGA (1024X768), Full Color (24-bit or higher) Mac Apple® Mac® OS X v10.7/10.8/10.9/10.
Appendix > Using programs on a PC Installing Samsung RAW Converter Using Samsung RAW Converter Launch i-Launcher, and then follow the on-screen instructions to install the program. Photos captured by a camera are often converted to JPEG format and stored in the memory according to the settings of the camera at the time of shooting. RAW files are not converted to JPEG format and are stored in the memory without any changes.
Appendix Updating the firmware Connect the camera to the computer and update the firmware of the camera or the lens. 3 Turn on the camera. 4 On the computer, select i-Launcher ĺ Software Update. (p. 197) 5 Follow the on-screen instructions to download the firmware to the camera. You cannot run a firmware update without a fully charged battery. Recharge the battery fully before running a firmware update. If you update the firmware, user settings and values will be reset.
Appendix Before contacting a service center If you are having trouble with your device, try these troubleshooting solutions before contacting a service professional. Situation Suggested remedies There is no space on the memory card. Delete unnecessary files or insert a new card. When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery. Format the memory card.
Appendix > Before contacting a service center Situation The memory card has an error Your computer does not recognize an SDXC or UHS-I/UHS-II memory card Suggested remedies Situation Suggested remedies Turn off the camera, and then turn it on again. Remove the memory card, and then insert it Ensure that the focus option you set is suitable again. Format the memory card. See “Cautions when using memory cards“ for more details. (p.
Appendix > Before contacting a service center Situation Suggested remedies The playback screen does not appear on the connected external device Ensure that the HDMI cable is properly The subject is not in focus. When the subject connected to the external monitor. Ensure that the memory card has recorded properly. is outside the AF area, focus on the subject by moving it into the AF area and half-pressing [Shutter]. The subject is too close. Step back from the subject and shoot.
Appendix Camera specifications Image Sensor Field of view Approx. 100 % Type BSI CMOS Angle Flip (Up 180°), Tilt (Up 90°, Down 45°) Sensor size 23.5 X 15.7 mm Focusing Effective pixels Approx. 28.2 mega-pixels Type Hybrid AF Total pixels Approx. 30.
Appendix > Camera specifications Drive Modes Mode Continuous shooting Dynamic Range Expansion Single, Continuous, Timer, Bracket Off/Smart Range+/HDR 9 fps Effects * Maximum shooting speed is 9 frames per second. It will slow down after approx. JPEG 40 shots, RAW 5 shots. (Based on UHS-I SD Card. May vary depending on the spec of memory card.) Bracket shooting Auto exposure bracketing, White Balance bracketing, Picture Wizard bracketing, Depth bracketing Self-timer 2–30 sec.
Appendix > Camera specifications Video Interface Format MP4, AVI Compression Video HEVC, MJPEG (VGA only) 4096X2160 (24 fps), 3840X2160 (30 fps), 1920X1080, 1280X720, 640X480 Size * When recording 4K or UHD video, the angle of view becomes narrower. (Effective angle of view: approx. 4K 1.68 times, UHD 1.77 times the focal length) Frame rate NTSC: 60 fps, 30 fps, 24 fps PAL: 50 fps, 25 fps, 24 fps Sound Stereo Storage Digital output connector Yes (USB 2.
Appendix Glossary Anaglyph mode AEB (Auto Exposure Bracket) Anaglyph mode enables a 3D effect to be applied to images when they are viewed through optical devices such as special glasses. The camera captures two separate images in red and cyan (chromatically opposite colors). The images are combined and when viewed through special glasses, with red and cyan colored filters, a 3D effect is achieved.
Appendix > Glossary Aperture Color space The aperture controls the amount of light that reaches the camera’s sensor. The range of colors that the camera can identify and reproduce in photos. Bluetooth Color temperature This feature allows you to exchange files with other devices. Color Temperature is a measurement in degrees Kelvin (K) that indicates the hue of a specific type of light source. As the color temperature increases, the color of the light source has a more bluish quality.
Appendix > Glossary Depth of field Exif (Exchangeable Image File Format) The distance between the nearest and farthest points that can be acceptably focused in a photograph. Depth of field varies with lens aperture, focal length, and distance from the camera to the subject. Selecting a smaller aperture value, for example, will increase the depth of field and blur the background of a composition.
Appendix > Glossary Histogram ISO sensitivity A graphical representation of the brightness of an image. The horizontal axis represents the brightness and the vertical axis represents the number of pixels. High points at the left (too dark) and right (too bright) on the histogram indicate a photo that is improperly exposed. The sensitivity of the camera to light, based on the equivalent film speed used in a film camera.
Appendix > Glossary MJPEG (Motion JPEG) NTSC (National Television System Committee) A video format which is compressed as a JPEG image. A video color encoding standard used most commonly in Japan, North America, the Philippines, South America, South Korea, and Taiwan. MPO (Multi Picture Object) An image file format that contains multiple images in a file. An MPO file provides a 3D effect on MPO-compatible displays, such as 3D TVs or 3D monitors.
Appendix > Glossary RAW (CCD raw data) Vignetting The original, unprocessed data, collected directly from the camera’s image sensor. White Balance, contrast, saturation, sharpness, and other data can be manipulated with editing software before the image is compressed into a standard file format. A reduction of an image’s brightness or saturation at the periphery (outer edges) compared to the center of the image. Vignetting can draw interest to subjects positioned in the center of an image.
Appendix Optional accessories You can purchase the following optional items: Lens, external flash, shutter release (micro USB type), rechargeable battery, battery charger, camera bag, camera case, memory card, filter, USB cable, HDMI cable, and camera strap. For information about accessories and their availability, visit the Samsung website. Before purchasing accessories, make sure they are compatible with your camera. Use only Samsung-approved accessories.
Appendix Index A C D F Accessories Camera Date and Time 178 Fader 123 Depth of Field (DOF) 17, 22 FEL 110 Display brightness 177 Files Connect the flash 59 Flash layout 58 Disconnecting (Windows) 165 Layout 30 Active AF 89 Camera specifications 204 AEL 117 Color space 169 Aperture 16, 20 Connecting to a computer Auto Backup 162 Auto focus 87 Auto Backup 162 Connecting as removable disk 164 Mac OS 165 Windows OS 164 Connecting to a smart phone B Battery Caution 191 Charging 36 Insert
Appendix > Index I M O Q Icons Maintenance 184 One touch shot 95 Quick Transfer 148 Memory card Optical Image Stabilization (OIS) 99 Playback mode 50 Shooting mode 46 i-Launcher 195 Image adjustment Adjusting photos 139 Retouching faces 139 Initial settings 37 Caution 187 Insert 34 Metering 111 MF Assist 96 MobileLink 143 N NFC 142 Notification panel 52 L Lenses Layout 53 Locking 54 Markings 57 Unlocking 55 R Red-eye effect 107 Remote Viewfinder 145 P Resolution Panorama mode 72 Inter
Appendix > Index S T V Samsung RAW Converter 199 Thumbnails 126 Video Out 178 Service center 201 Time Lapse 105 Videos Settings 177 Timer 102 Shooting modes Touch AF 94 Aperture Priority 64 Auto 60 Custom 67 Manual 66 Program 62 Recording 73 Samsung Auto Shot 69 Shutter Priority 65 Smart 71 Shutter speed 18, 20 Slide show 132 Smart filter Capturing 136 Options 119 Recording 73 Viewing 134 Touch screen 40 Tracking AF 94 Transferring files Mac 165 Windows 164 W White balance 83 TV Link 158
Please refer to the warranty that came with your product or visit our website www.samsung.com for after-sales service or inquiries.