Use and Care Manual

104
Shooting Functions > Drive (shooting method)
Depth Bracketing
When you press [Shutter], the camera captures 3 consecutive photos,
each with a dierent depth of eld by adjusting the aperture value. Use
a tripod to prevent blurry photos as the camera captures three photos
continuously. You can adjust the settings in the Bracket Settings menu.
This feature is available only in Program or Aperture priority mode.
Bracketing settings
You can set up the options for each bracket function.
To set a bracketing
option,
In Shooting mode, press [m] ĺ b ĺ Drive ĺ select a
bracketing option, and then press [F]
ĺ set up the options
for each bracketing.
* Default
Option Description
AE Bracket
Set the exposure interval. (-/+ 0.3 EV*, -/+ 0.7 EV,
-/+ 1.0 EV, -/+ 1.3 EV, -/+ 1.7 EV, -/+ 2.0 EV,
-/+ 2.3 EV, -/+ 2.7 EV, -/+ 3.0 EV)
WB Bracket
Adjust the White Balance interval range of the
3 bracketed photos. (AB -/+1, AB -/+2, AB -/+3*,
MG -/+1, MG -/+2, MG -/+3)
For example, AB -/+3 adjusts the Amber value plus
or minus three steps. MG -/+3 adjusts the Magenta
value the same amount.
P Wiz Bracket
Select the 3 Picture Wizard settings the camera will
use to capture the 3 bracketed photos.
Depth Bracket
Set the depth interval. Use command dials 1 or 2
to select an option. You can also drag the slider or
touch the arrows to select an option.
(-/+ 0.3, -/+ 0.7, -/+ 1.0*, -/+ 1.3, -/+ 1.7, -/+ 2.0,
-/+ 2.3, -/+ 2.7, -/+ 3.0)