Manual

j Channel Control
Selecting the Antenna
1 Press the MENU button to display the menu.
Press the A or T button to select Channel, then press the ENTER button.
2 Press the ENTER button to select Antenna.
Press the A or T button to select Air or Cable, then press the ENTER button.
Press the EXIT button to exit.
Press the ANTENNA button on the remote control to select Air or Cable.
If the an[enna _sconnected to ANT1 IN(AIR/.
select Air and _fit is connected to ANT2 IN CABLE.
select CabJe.
:_ If both ANT1 INIAIRI and ANT2 IN(CABLE1are
connec[ea select the antenna input _)u want. If the
anl:enna InPut ISnot seIectea properly, noise may
aDDearon tne screen.
Adding and Erasing Channels
You can add or delete a channel to display the channels you want. To use the Channel List function, first run Auto
Program (see page 19).
1 Press the MENU button to display the menu.
Press the A or T button to select Channel, then press the ENTER button.
2 Press the A or T button to select Channel List, then press the ENTER button.
3 Press the A or T button to select Added, then press the ENTER button.
Pressthe A/T/4/_ buttonsto selecta channetto add, then pressthe ENTER
bu_on.
Pressthe A or T button to select Add, then pressthe ENTER button to add the
channel.
Press the RETURN button to return.
_-- Alt added channels wilt be shown in the Added menu.
Continued...