Manual

Labeling Channels
Channels can labeled so that their cal! letters appear whenever the channel is selected.
1 Press the MENU button to display the menu.
Press the ,i_ or T button to select Channel, then press the ENTER button.
Press the A or T button to select Name, then press the ENTER button.
2
3
Press the A or T button to select the channel to be assigned a new name, then
press the ENTER button.
Press the A or T button to select a letter, a number or a blank (Results in this
sequence: A~Z, 0~9, +, -, *,/, blank).
Press the !1_button to switch to the next field, which wilt be selected.
Select the second letter or digit by pressing the _, or 'V button, as above.
Repeat the process to select the last three digits. When you have finished,
press the ENTER button to assign the new name.
To erase the assigned new name, select Clear by pressing the 4 or !1_button,
then press the ENTER button.
Press the EXIT button to exit.
_-- The names of digital broadcasting channels are automatically assigned and
thus cannot be assigned by users.
Fine Tuning Analog Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1 Press the MENU button to display the menu.
Press the A or T button to select Channel, then press the ENTER button.
2 Press the A or T button to select Fine Tune, then press the ENTER button.
3 Press the 4 or _ button to adjust the fine tuning.
4 To store the fine tuning setting in the TV's memory, press the ENTER button.
To reset the fine tuning setting, press the T button to select Reset, then press
the ENTER button.
Press the EXIT button to exit.
Only analog TV channels can be fine tuned.
_-- " * "wilt appear next to the number of fine-tuned channels.