Manual

To Select the Source

Use to select TV or other external input sources such as DVD players or Cable Bo×/Satellite receivers (Set-Top

Box) connected to the TV. Use to select the input source ofyour choice.

Press the MENU button to display the menu.

Press the A or _' button to select input, then press the ENTER button.

Press the ENTER button to select Source List.

Press the A or _' button to select the signal source, then press the ENTER

button.

You can choose between the following sets of jacks: AV1, S-Video1,

Component1, Component2, PC, HDMI1, or HDMI2 on the TV's rear panel

and AV2, S-Video2, or HDMI3 on the TV's side panel.

HDMI1, HDMt2, or HDMI3 input can only be selected when the external

device is turned on and connected via HDMI.

_-- You can choose only those external devices that are connected to the TV.

You can also press the SOURCE button on the remote control to view an external

signal source.

iiiii iiiii

To Edit the input Source Name

You can name the device connected to the input jacks to make your input source selection easier.

1 Press the MENU button to display the menu.

Press the A or _' button to select input, then press the ENTER button.

Press the A or _' button to select Edit Name, then press the ENTER button.

2 Press the A or _' button to select AVI, AV2, S-Videol, S-Video2,

Component1, Component2, PC, HDMII, HDMI2, or HDMI3 input jack,

then press the ENTER button.

Press the A or _' button to setect VCR, DVD, D-VHS, Cable STB, HD STB,

Satellite STB, PVR STB, AV Receiver, DVD Receiver, Game, Camcorder,

DVD Combo, PC, VOD STB, or TV input source, then press the ENTER button.

Press the EXIT button to exit.