Manual

Reducing the Effects of Screen Burn

if screen burn has occurred, you can select a white screen or scrolling to help remove screen burn artifacts.

Press the MENU button to display the menu.

Press the _, or _' button to select Setup, then press the ENTER button.

Press the A or T button to select Screen Burn Protection, then press the

ENTER button.

Press the A or T button to select White, Scrolling, or Side Gray

then press the ENTER button.

Press the EXIT button to exit.

White

This function removes after-images on the screen by changing the color of pixels to

white. Use this function when there are remaining after-images or symbols on the

screen especially when you displayed a still image on the screen for a tong time.

This function removes after-images on the screen by moving all the pixels on the

PDP according to a pattern. Use this function when there are remaining after-images

or symbols on the screen especially when you displayed a still image on the screen

for a tong time.

Side Gray

When you watch TV with the screen ratio of 4:3, the screen is prevented from any

damage by adjusting the white balance on both extreme left and right sides.

To prevent the screen burn from happening, select Dark or Light.

* Dark: When you setthe screen ratio to 4.:3,itdarkensthe left and right sides.

Light: Whenyou setthe screenratio to 4:3, it brightens the left andright sides.

_-- To remove after-images on the screen, use either the White or Scrolling

function. Although both functions remove after-images on the screen, Scrolling

is more effective.

_-- The after-image removal function has to be executed for a long time

(approximately 1 hour) to effectively remove after-images on the screen. If the

after-image is not removed after performing the function, repeat the function

again.

:,_ Press any key on the remote control to cancel this feature.

Setting the Function Help

Displays help on the menu functions.

1 Press the MENU button to display the menu.

Press the _, or T button to select Setup, then press the ENTER button.

2 Press the _, or T button to select Function Help, then press the ENTER

button.

3 Press the _, or T button to select Off or On, then press the ENTER button.

Press the EXIT button to exit.

_-- The Function Help default setting is On.