User Manual (ver.1.0)

English - 42
Channel Control
Selecting the Antenna
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ENTER button to select Antenna.
Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button.
Press the
EXIT button to exit.
Press the ANTENNA button on the remote control to select Air or Cable.
➢
If the antenna is connected to ANT1 IN(AIR),
select Air and if it is connected to ANT2 IN(CABLE),
select Cable.
➢
If both ANT1 IN(AIR) and ANT2 IN(CABLE) are
connected, select the antenna input you want. If the
antenna input is not selected properly, noise may
appear on the screen.
RETURN
FAV.CH AUTO PROG. ADD/DEL
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA : On
ChannelT V
Enter
Move
Air
Cable
Return
Clearing Scrambled Channels - Digital
The Clear Scrambled Channel function is used to filter out scrambled channels
after Auto Program is completed. It removes the scrambled channels from the
list by tuning the digital cable channels. This process may take up to 20-30
minutes.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTER button.
2 Press the ENTER button to select Antenna.
Press the ▲ or ▼ button to select Clear Scrambled Channel, then press the
ENTER button. It searches scrambled channels, which are to be removed from
the list.
To stop searching scrambled channels
Press the ▼ button to select Stop, then press the ENTER button.
Press the ◄ button to select Yes, then press the ENTER button.
3 When the scrambled channel searching is completed, press the ENTER button.
Press the EXIT button to exit.
Antenna : Air
►
Auto Program
►
Clear Scrambled Channel
►
Channel List
►
Name
►
Fine Tune
►
Signal Strength
►
LNA : On
►
ChannelT V
Enter
Move
Return
Clear Scrambled Channel
Removing scrambled channel.
Cable Channel 67
3 %
Stop
Enter
Return
BN68-01094W-01Eng.indb 42 2007-10-08 ¿ÀÈÄ 6:05:35