User Manual

30_ camera operation
camera operation
1. Press the Function Setup switch.
y
Main SETUP menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
y
y
Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
M
` An item with the icon also has sub menus. To select a sub menu, select an item
with the icon and press the Function Setup switch.
` An item with the --- icon is unavailable due to function settings.

1. When the SETUP menu screen is
displayed, select ‘VIDEO FORMAT’
by using the Function Setup switch
so that the arrow indicates ‘VIDEO
FORMAT’.
2. Select a desired mode using the
Function Setup switch.
y
The video output can be selected
from AHD/CVBS.
M
` By pressing the function setting button for more than 5 seconds, you can change
the setting from AHD to CVBS. From CVBS, you can change it to AHD.

 1.
 
2.
D-WDR OFF
  
 
  
 
  
Change the status
using the Function
Setup switch.
Select the
function using
the Function
Setup switch.

 1.
 
2.
D-WDR OFF
  
 
  
 
  