User Manual

English_31
● Camera OperatiOn
D-WDR
If an object has a large variance between bright and dark areas, it will keep bright areas
bright and make selected dark areas bright, so that the overall brightness can be maintained.
1. When the SETUP menu screen is
displayed, select ‘D-WDR’ by using the
Function Setup switch so that the arrow
indicates ‘D-WDR’.
2. Use the Function Setup switch to
change the D-WDR level in the sub
menu according to the contrast
between bright and dark areas.
<D-WDR OFF>
<D-WDR ON>

Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is
displayed, select ‘White Bal’ by using
the Function Setup switch so that the
arrow indicates ‘White Bal’ .
2. Select a desired mode using the
Function Setup switch.
 Select one of the following 5 modes, as appropriate for your purpose.
y
 Select this when the color temperature is between 1,800K and 10,500K.
y
 Use it in a color temperature range of 1,800K to 10,500K.(including
Natrium). Auto adjustment is made to optimize the camera color to the
outdoor environment.

1.
 
 2.
D-WDR OFF
  
 
  
 
  

1.
 
2.
D-WDR OFF

  