User Manual
32_ camera operation
camera operation
y
Select this when the color temperature is between 4,500K and 8,500K.
Automatically adjusts the camera color for optimization to the indoor
environment.
y
Select this to fine-tune White
Balance manually. Set White
Balance first by using the ATW
or AWC mode. After that button
to MANUAL mode, fine-tune the
White Balance and the Function
Setup switch.
y
SET :
To find the optimal luminance level for the current environment, point the
camera towards a sheet of white paper and press the Function Setup switch. If the
environment changes, readjust it.
M
` White Balance may not work properly under the following conditions. In this case
select the AWC mode.
1
Select this When the color temperature of environment surrounding the subject
is out of the control range (e.g. clear sky, or sunset)
2
When the ambient illumination of the subject is dim.
` If the camera is directed towards a fluorescent light or is installed in a place where
illumination changes dramatically, the White Balance operation may become
unstable.
1. When the SETUP menu screen is displayed, select ‘EXPOSURE’ by using the
Function Setup switch so that the arrow indicates ‘EXPOSURE’.
2. Select a desired mode using the Function Setup switch.
y
Adjusts the video
brightness.
y
You can select the shutter.
-
MIN
: 1/30 ~ 1/12000
-
MAX
: 1/60 ~ 1/12000(NTSC) , 1/50
~ 1/12000(PAL)
-
A.FLK : Select this when you
experience picture flicker, this happen when there is a clash with the
installed lighting frequency.
IIIIIIIIII
I
IIIIIIIIII
147
IIIIIIII
I
IIIIIIIIIIII
124
1.
IIIIIIIIII
I
IIIIIIIIII
50
2.
3.
HIGH
4.
5.