User Manual

English_35
● Camera OperatiOn

1. When the SETUP menu screen is
displayed, select ‘SPECIAL’ by using
the Function Setup switch so that the
arrow indicates ‘SPECIAL’.
2. Select a desired mode using the
Function Setup switch.
y

➊
If the SPECIAL menu screen is displayed,
use the Function Setup switch so that
the arrow indicates ‘DISPLAY’.
➋
Select a desired mode using the Function Setup switch.
-
FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
-
LANGUAGE : You can select the menu language according to your requirements.
-
RETURN : Return to the SPECIAL menu.
y
 : You can select whether to use COAX communication.
y

❶
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘IMAGE ADJ’.
❷
Select a desired mode using the
Function Setup switch.
-
GAMMA : The setting range is 0.35 ~ 1.0.
The closer to 1.0 the setting is,
the darker it gets.
-
PED LEVEL : The setting range is 1 ~ 100. The closer to 100 the setting is, the
higher the PED level gets.
-
COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the
smaller the color gain gets and the more color blind it gets.
-
H-REV : Flip an image horizontally.
-
V-REV : Flip an image vertically.

1.
 
2.
D-WDR OFF
  
 
  

 
  

▶
1.   
2.

I
IIIIIIIIIIIIIIIIIIII
5
3. 
IIIIIIIIIII
I
IIIIIIIII
50
4. H-REV OFF
5. V-REV OFF
  
7. 