User Manual

English_37
● Camera OperatiOn
-
COLOR : The picture is always displayed in color.
-
B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
M
` If the lens mounted in the camera is different from the one set in <LENS> of the
<EXPOSURE> menu, then the night/day mode may not operate normally.
y
 Mask an area you want to hide on the screen.
➊
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘PRIVACY’.
➋
Select a desired mode using the
Function Setup switch.
-
AREA : You can select up to 8
PRIVACY areas.
-
MODE
: Determines whether to use the
area selected in the AREA.
-
MASK COLOR : Determine area
color. You can select Green, Yellow, Red, Blue, Black, White, Gray.
-
TRANSPARENCY : Adds or removes transparency from the masking area.
-
V POSITION/HEIGHT/H POSITION/WIDTH : Adjust the size and position of the selected area.
-
RETURN : Return to the SPECIAL menu.
y

This product generates signals each time an object movement is detected in the four areas
of the screen so efficient monitoring can be achieved.
➊
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘MOTION’.
➋
Select a desired mode using the
Function Setup switch.
y
DET. AREA : Set the areas of motion detection.
` SEL AREA : Select from four areas that users want.
` MODE : Determine whether to use the selected area.

▶
1. 
2. 
IIIIIIIIII
I
IIIIIIIIII
5
3. 

▶
1.  1
2.  OFF
3.  
4.  OFF
 
II
I
IIIIIIIIIIIIIIIIII
25
6. HEIGHT
IIIIIIII
I
IIIIIIIIIIII
50
 
I
IIIIIIIIIIIIIIIIIIII
10
8. WIDTH
IIII
I
IIIIIIIIIIIIIIII
30
9. 