LED TV Installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model [HC890_ZA]Install_Guide_00ENG.indd 1 Serial No.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Introduction This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of special functions, and lets you limit some user (guest) controls. Operational Modes This TV has two modes : Interactive and Stand-alone mode.
Contents Introduction............................................................................................................................................................... 2 Operational Modes.................................................................................................................................................... 2 Still image warning..............................................................................................................................................
Accessories ✎✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎✎The items’ color and shape may vary, depending on the model. ✎✎The parts for the stand are listed under Stand Components on the following page. List of Parts MIC TV SEARCH VOL RETURN EXIT KEYPAD VOICE SMART HUB SOURCE CH GUIDE CH.
Installing the LED TV Stand Stand Components When installing the stand, use the provided components and parts. A 1 EA B C X2 X2 D yy Stand yy Guide Stand C 1 yy Screws 2 1-1 A yy Bracket Stand x12 (M4 X L14) 1-2 2-1 2-2 2-3 1-3 D 3 ✎✎ Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen-side down. ✎✎ Insert the Stand Guide into the slot on the bottom of the TV. ✎✎ Slide and assemble it to the end line in the direction of arrow.
Using the TV's Controller ✎✎The color and shape of the TV Controller may vary depending on the model. ✎✎The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control. Open Smart Hub. Open the menu. m R Select a source. P Turn off the TV.
The Connection Panel 1 2 VIDEO 2 @ ! 5 3 0 9 6 7 4 8 ✎✎Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off. ✎✎When connecting an external device, match the color of the connection terminal to the cable. 1 USB (HDD/1.0A) / CLONING –– Connector for software upgrades and Media Play, etc. –– Service connection. 2 HDMI IN 1, 2, 3(ARC), 4(DVI): Connects to the HDMI jack of a device with an HDMI output.
COMPONENT IN / AV IN –– Use to connect to Component video / audio devices such as DVD players and AV (Composite) devices such as VCRs. –– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on A/V or Component devices. –– The COMPONENT IN jack is also used as the VIDEO 1 jack.
The Remote Control ✎✎This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired customers. Display and select the available video sources. Turns the TV on and off. Press to directly access channels. Press to select additional digital channels being broadcast by the same station. For example, to select channel ‘54-3’, press ‘54’, then press '-' and ‘3’. Adjust the volume. Return to the previous channel. Cut off the sound temporarily.
Installing batteries (Battery size: AAA) Match the polarity of the batteries to the symbols in the battery compartment. X Y Z After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover closed. ✎✎ NOTE •• Use the remote control within 23~33 feet of the TV. •• Bright light may affect the performance of the remote control. Avoid using near fluorescent lights or neon signs. •• The color and shape of the remote may vary depending on the model.
Using the Samsung Smart Control Buttons and Functions MIC Microphone: Use the microphone with the Voice Control and Voice functions. ‐‐ The Voice Control function can be affected by unclear pronunciation, voice level, or surrounding noise. TV KEYPAD SEARCH MUTE: Cuts off the sound temporarily. SOURCE VOICE P SEARCH: Run search function. ( Not available ) KEYPAD: Displays the On-Screen Remote.
Installing Batteries into the Samsung Smart Control To use the Samsung Smart Control, insert the batteries into the device referring to the figure below. 1. Gently pull on the battery cover's notch and then remove the cover completely once it comes loose. 2. Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly. 3. Place the battery cover on the remote control and insert the top part of the cover into the remote control. 4.
Using the Touch Pad and the Directional Buttons – In the TV's menu, navigate to Support > Smart Control Tutorial to view a tutorial that shows how to use the touch pad. – If the touch pad's sensitivity is too high or low, navigate to the System > Smart Control Settings menu, and then select the Touch Sensitivity option to change the touch pad sensitivity. Moving the Focus or Pointer Press the directional buttons (up, down, left, and right) to move the focus, pointer, or cursor in the direction you want.
Reconnecting the Samsung Smart Control to the TV If the Samsung Smart Control stops operating or works abnormally, try replacing the batteries. If the problem persists, pair the Samsung Smart Control and TV again. 1. Move to within a foot of the TV, and then aim the Samsung Smart Control at the TV's remote control receiver. Remote Control Sensor 2. Press the RETURN button and GUIDE button simultaneously for 3 seconds. 3. The connection icon appears on the screen.
Displaying and Using the On-Screen Remote Press the KEYPAD button on the Samsung Smart Control to display the On-Screen Remote on the TV's screen. Use the On-Screen Remote to enter numbers, control content playback, and use the features and functions of the TV, just like a real remote. Use the directional buttons on the Samsung Smart Control to move the cursor on the On-Screen Remote. Press the touch pad on the Samsung Smart Control to select.
Connecting to the Network You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a wired or wireless connection. ✎✎After you have “physically” connected your TV to your network, you must configure the network connection to complete the process. You can configure the connection after the Initial Setup process, through the TV’s menu. Network Connection - Wireless Connect the TV to the Internet using a standard wireless router or modem.
Network Connection - Wired There are three main ways to connect your TV to your network using cable, depending on your network setup.
Connecting the TV to an SBB or STB TV Rear Panel ETH MODEM Data Cable 1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable. ✎✎ The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type. 18 English [HC890_ZA]Install_Guide_00ENG.
¦¦ List of Hospitality SI Vendors and Compatible Data Cables Supplied with the TV yy Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables. yy Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV. Confirm the code on the Code Label Note the labeled end. Note the labeled end.
¦¦ Connecting the Audio Output to an Audio Amplifier TV Rear Panel AUDIO IN Audio Amplifier 1 Stereo cable 1. Connect the AUDIO OUT port of the TV to the Audio In port of an audio amplifier with a stereo cable. 20 English [HC890_ZA]Install_Guide_00ENG.
Connecting the Bathroom Speakers You can connect the Bathroom Speakers in the following manner. ¦¦ Connecting through the Variable Output (available without an external amplifier) TV Rear Panel 1 Speaker 2 VOL+ VOL- Volume Control Box 1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel. Speaker + Speaker - N/C ✎✎ The VARIABLE AUDIO OUT port supports MONO sound out only. ✎✎ Speaker Wire: Use speaker cable no more than 82 feet (25m) in length.
Connecting the RJP (Remote Jack Pack) Connect the input jacks on the TV to the RJP. The RJP lets guests connect audio and video sources to the TV. RJP Rear USB HDMI S-VIDEO RCA AUDIO/PC RS/232 2 Video / Audio Cable 1 DVI Audio cable 4 RS-232 Data Cable VIDEO 3H DMI cable TV Rear Panel 1. Connect the DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP. 2. Connect the COMPONENT IN [VIDEO] / [R-AUDIO-L] port of the TV to the RCA port of the RJP. 3.
yy RJP (Remote Jack Pack): The RJP is a hardware module that has various Audio and Video inputs (A/V Video, A/V Audio, PC and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP communicates with the TV via RS232. The RJP communicates with the TV by sending messages regarding Active/Inactive sources. –– A group of hotel menu items let you assign numbered priorities to the jacks of the RJP. (See page 26). 1 is the highest priority and 3 is the lowest.
Setting the Hotel Option Data To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode menu and the Interactive mode menu. The menu items that differ between the modes are listed below. Menu items in the Stand-alone mode only: –– SI Vendor : Smoovie –– REACH Server and its submenus. Menu items in the Interactive mode only: –– SI Vendor: Samsung and other vendors. All other items appear in both modes.
¦¦ Menu Items To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTER buttons in order. To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any changes you made are saved. Hotel TV Function Category Item initial value Hospitality Mode Hospitality Mode Standalone SI Vendor SI Vendor OFF Description Select Hospitality mode. • Interactive mode : TV works with an SI STB or SBB. • Standalone mode : TV works alone, without an SI STB or SBB.
Hotel TV Function Category initial value Picture Menu Lock OFF Enable or disable the Picture Menu. ON • • Menu Display Turning the front panel (local key) operations on/off. • Unlock : Unlocks all panel keys. • Lock : Locks all panel keys. • OnlyPower : Locks all panel keys except the Power panel key. • Menu/Source : Locks the Menu and Source panel keys. Unlock Home Menu Display ON OFF:The Home Menu is not displayed. ON:The Home Menu is displayed. Home Menu Editor … Edit Home Menu .
Hotel TV Function Category Bathroom Speaker Item initial value Sub Amp Mode 2 Determines the Bathroom Speaker sound AMP operation mode. • 0: Turns the Bathroom Speaker sound AMP function off (PWM off). • 1 : The Bathroom Speaker sound volume follows the TV speaker sound volume identically. The Bathroom Speaker sound volume is controlled by the TV remote or panel keys. • 2: The Bathroom Speaker sound volume is controlled by the Batroom Speaker volume controller.
Hotel TV Function Category Item initial value Widget Mode ON Description • • Solution Type Widget Solution Select the the type of the solution server installed in your site for the widget service. • Vendor Server : in the case of that the special SI vendor of the server is installed in your site. Vendor Server • SINC Server : in the case of that the Samsung SINC server is installed in your site. Server URL Setting if this item is entered into, URL of the solution server can be inputted.
Hotel TV Function Category Item initial value Description • Self Diagnosis for TV Self Diagnosis for HTV … … • Enter Self Diagnosis Menu. Picture Test: Use to check for picture problems. If the problem appears in the test picture, select Yes and follow the directions on the screen. Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs during the test, select Yes and follow the directions on the screen.
¦¦ Welcome Message The Welcome Message feature displays a custom message on the TV every time it is turned on. –– Welcome message settings are in the Hotel Option Menu. –– Set Welcome Message to ON to display the message when the TV is powered on. Welcome Message OFF Edit Welcome Message Hospitality Logo OFF Hospitality Logo DL ... Logo Display Time ... –– You can make the Welcome Message up to 25 characters long and edit it in the Hotel Service menu.
¦¦ Hotel Logo The Hospitality Logo function displays the Hotel's picture image when the TV is powered on. –– Hospitality Logo settings are the Hotel mode menus. –– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. –– If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on.
¦¦ USB Cloning The USB Cloning function lets you download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you create a standard file of settings and distribute that standard file to all the TVs in your facility. yy Cloning from TV to USB: Copies stored menu settings from a TV to a USB device. 1. Insert a USB drive into the USB port on the rear of the TV. 2.
yy Settings Cloned in the Hotel Menu Menu Item Cloning Support Hospitality Mode Yes SI Vendor Yes Power On Channel Yes Power On Channel Num Yes Power On Channel Type Yes Power On Volume Yes Power On Volume Num Yes Min Volume Yes Max Volume Yes Power On Source Yes Power On Option Yes Channel Setup N/A Channel Editor N/A Dynamic SI Yes Picture Menu Lock Yes Menu Display Yes Panel Button Lock Yes Home Menu Display Yes Home Menu Editor Yes Home Menu Auto Start Yes Clock
Menu Item Cloning Support Logo Display Time Yes Clone TV to USB N/A Clone USB to TV N/A Setting Auto Intialize Yes REACH 3.0 Yes REACH 2.0 Yes REACH Channel Yes Group ID No IPG Room Type No TICKER Yes REACH Update Time Yes REACH Update Immediate Yes Room Number Yes REACH 2.0 TV Sound Yes REACH 2.
¦¦ Multi Code Remocon A Multi Code Remocon is a special remote which is designed to control multiple TVs. This function is useful where there is more than one TV in a location. You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID numbers are displayed on each TV's OSD. The Initial ID code for each TV is “0”. –– You can set and reset the ID code in Analog TV mode or PC mode. (Not available in DTV mode.) –– You can set the ID code to any digit from 0 to 9.
¦¦ Setting Auto Initialize When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture, Sound, Input, Channel, Setup, and Hotel Setup. This lets you set nearly all of the menu values on your hospitality TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they can change the settings in those menus so they are no longer standard.
¦ Hotel Plug & Play The Hotel Plug & Play function, which automatically performs the Hotel mode selection, Country Setup, Clock Setup, and Picture Mode Setup, runs once, when power is first turned ON. Setup also runs automatically after you have executed a Service Reset. y UI Scenario If you select Factory Reset, the TV resets all values to their factory defaults and then displays the Hospital Plug & Play menu. Go to the first Hospital Plug & Play screen below.
yy Hotel Plug & Play OSD –– Initially highlighted: Interactive –– If you select the Standalone Only button, the Standalone hotel mode is set by default and the “Standalone mode is set” OSD appears for 3 seconds. TV enters RF mode automatically after displaying the “Standalone mode is set” OSD for 3 seconds. –– If you select the Interactive mode, the Interactive Setup Menu is displayed. Press the power off key to exit from the Interactive menu.
¦¦ USB Software Upgrade Method Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hot line at 1-866-8940524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive containing the upgrade to the USB port located on the TV. When the software is upgraded, video and audio settings you have made will return to their default (factory) settings.
¦¦ Channel Bank Editor (Smoovie TV Only) The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to. The Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each bank. SMOOVIE remotes have instalable Bank Cards which correspond to the channel banks in the Channel Bank Editor. The remotes only allow access to channels in the channel bank that correspond to the installed card.
Smoovie Set Up Sequence Smoovie TV Setup (Air/ Cable ) Only Air or Cable used Only Air or Cable used If the TV starts with Hotel Plug&Play If Hotel Plug&Play already done 1 Do a complete P&P (including Air or Cable auto tune) Enter the Hotel menu 2 After P&P, the TV displays the Hotel menu Select the channel type - ATV or ADTV for Air - CATV or CDTV for cable 3 Select the channel type - ATV or ADTV for Air - CATV or CDTV for cable Select Smoovie TV in the Hotel menu 4 Select Smoovie TV in the
The picture below shows a sample Channel Editor screen. Channel All a Delete b Select All a2 ----- (Cable) a 10 a3 ----- (Cable) Air 10-1 CW CW DTV a4 ----- (Cable) a 11 HBO a5 ----- (Cable) Air 11-1 HBO DTV a6 ----- (Cable) a 12 NBC a7 ABC Air 12-1 NBC DTV Air 7-1 ABC a 13 ----- (Cable) CNN a8 FOX a 14 Air 8-1 FOX DTV Air 15 ----- (Cable) a9 ----- (Cable) a 16 TNT } Video Mute On ` Information U Page E Select T Tools R Return yy a Indicates an analog channel.
When you press the TOOLS button, the following menu is available.
The external sources of this TV are displayed in the last page of the Channel Editor menu as shown in the example below. In the example, there are two external sources connected to the TV, HDMI2 and AV. –– You can assign a new analog channel to an external source by selecting the source on the last page, pressing the TOOLS button, selecting Edit Channel Number, and then using the up or down arrow button on the remote to select the channel number of the analog channel.
Installing the Wall Mount Preparing befor installing Wall-Mount To install a wall-mount from another manufacturer, use the Holder-Ring in more than 65 inches of models. The Holder-Ring is not available in less than 55inches models. ✎✎For more detailed information, refer to the User Manual of the Wall Mount Kit. Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the TV on a wall.
Securing the TV to the Wall Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang on or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety, you can purchase and install the anti-fall device as described below.
5. Fasten the Holder with a screw the same way used when attaching it to a cabinet. Make sure to stretch the Holder cord tight. If the rack is made of steel or glass, attach the holder onto the wall. –– When attaching the holder onto a wall, use an anchor compatible with the wall's material. When attaching the holder onto a wall, use an anchor compatible with the wall material. Anchor –– Install the TV close to the wall so that it does not fall.
Specifications Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Model Name 50°F to 104°F (10°C to 40°C) 10% to 80%, non-condensing -4°F to 113°F (-20°C to 45°C) 5% to 95%, non-condensing HG46NC890 Display Resolution Screen Size (Diagonal) With stand Weight Without Stand With Stand HG65NC890 1920 X 1080 46" Class (45.9 measured diagonally) Sound (Output) Dimensions (WxHxD) Body HG55NC890 55" Class (54.6 measured diagonally) 65" Class (64.
Display Resolution When you use your TV as a computer monitor, you can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose. Mode Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H / V) IBM 640 x 350 720 x 400 31.469 31.469 70.086 70.087 25.175 28.322 +/-/+ MAC 640 x 480 832 x 624 1152 x 870 35.000 49.726 68.681 66.667 74.551 75.062 30.240 57.284 100.
5 4 1 3 2 8 6 7 Dimensions ▪▪ Front view / Side view HG46NC890 / HG55NC890 / HG65NC890 6 1 2 4 3 5 7 (Unit: inches) HG46NC890 1 40.6 2 40.1 3 22.6 4 23.5 5 25.1 6 1.3 7 8.2 HG55NC890 48.2 47.6 26.8 27.8 29.4 1.3 10.5 HG65NC890 56.9 56.2 31.6 32.9 34.8 1.3 12.4 ▪▪ Jack panel detail / Rear view HG46NC890 / HG55NC890 / HG65NC890 5 4 1 3 2 8 6 7 (Unit: inches) HG46NC890 1 5.1 2 5.0 3 5.8 4 12.4 5 2.8 6 9.3 7 10.3 8 11.4 HG55NC890 5.1 HG65NC890 5.1 5.0 7.1 16.
▪▪ Base Stand detail HG46NC890 / HG55NC890 / HG65NC890 2 1 3 (Unit: inches) HG46NC890 1 40.2 2 8.2 3 6.2 HG55NC890 47.7 10.5 6.4 HG65NC890 56.3 11.8 8.6 NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. © 2014 Samsung Electronics America, Inc English [HC890_ZA]Install_Guide_00ENG.
¦¦ Important Warranty Information Regarding Television Format Viewing ✎✎ See the warranty card for more information on warranty terms. Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving.
This page is intentionally left blank. [HC890_ZA]Install_Guide_00ENG.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Samsung Hospitality Hotline : 1-866-894-0524 (US) 1-800-726-7864 (CANADA) 1-800-726-7864 (MEXICO) Web site : http://www.samsung.com/us/business [HC890_ZA]Install_Guide_00ENG.