User Manual High Definition Digital Camcorder www.samsung.
before reading this user manual SAFETY WARNINGS What the icons and signs in this user manual mean: Meaning Safety Icon There is a potential risk of death or serious injury. WARNING There is a potential risk of personal injury or damage to the product. CAUTION CAUTION To reduce the risk of fire, explosion, electric shock, or personal injury when using your camcorder, follow these basic safety precautions.
IMPORTANT INFORMATION ON USE About this user manual Thank you for purchasing this Samsung Camcorder. Please read this user manual carefully before you use the camcorder and keep it handy for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting. This User Manual covers HMX-E10WN, HMX-E10BN, HMX-E10ON models. • Illustrations of model HMX-E10WN are used in this user manual. • The displays in this user manual may not be exactly the same as those you see on the LCD screen.
before reading this user manual • Copyrights: Please note that this camcorder is intended for individual use only. Data recorded on the storage media in this camcorder using other digital/analog media or devices is protected by the copyright act and cannot be used without permission of the owner of the copyright, except for personal enjoyment. Even if you record an event such as a show, performance, or exhibition for personal enjoyment, we strongly recommend that you obtain permission beforehand.
important safety instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
important safety instructions 15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. 16. VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered. Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register.
23. OVERLOADING: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 24. OBJECTS AND LIQUIDS: Never push objects of any kind into this CAMCORDER through openings as they may touch dangerous voltage points or short out a part that could result in a fire or electric shock. Never spill liquids of any kind onto the CAMCORDER. Should spillage occur, unplug unit and have it checked by a technician before use. 25.
important safety instructions USER INSTALLER CAUTION: Your authority to operate this FCC certified equipment could be voided if you make changes or modifications not expressly approved by this party responsible for compliance to part 15 FCC rules. NOTE: Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For details see lamprecycle.org, eiae.
safety information The safety precautions illustrated below are to prevent personal injury or material damages. Heed all instructions carefully. WARNING Means that there is a potential risk of serious personal injury. Prohibited action. Do not touch the product. CAUTION Means that there is a potential risk of personal injury or damage to the product. Do not disassemble the product. This precaution must be kept. WARNING SAND Do not allow water or metal and inflammable matter to enter the camcorder.
safety information Keep the camcorder away from water when using it near the beach or pool or when it rains. There is a risk of malfunction or electric shock. Keep the used lithium battery or memory card out of the reach of children. If the lithium battery or memory card is swallowed by a child, consult physician immediately. If the camcorder emits an abnormal sound or smell, or smokes, immediately detach the battery from the camcorder and request service from a Samsung service center.
CAUTION Do not press the surface of the LCD with force, or hit it with a sharp object. If you push the LCD surface, display unevenness may occur. Do not drop or expose the camcorder, battery or other accessories to severe vibrations or impact. This may cause a malfunction or injury. Do not use the camcorder on a tripod (not supplied) in a place where the tripod is subject to severe vibrations or impact. Do not use the camcorder in direct sunlight or near heating equipment.
safety information Do not wipe the camcorder body with benzene or thinner. The exterior coating could peel off or the case surface could deteriorate. Do not use the camcorder near a TV or radio. It can cause distortion on the TV screen or interference on the radio. Do not use the camcorder near sources of strong radio waves or magnetism such as speakers or large motors. Noise from these sources could distort the video or audio you are recording. Use Samsung-approved accessories only.
contents QUICK START GUIDE 06 10 11 13 What’s included with your camcorder Location of controls Identifying the screen displays 17 19 Using the battery Checking the battery state 22 23 24 Turning your camcorder on/off Setting the operating modes Using the touch panel FIRST TIME SETTINGS 25 25 26 Turning the power on for the first time and setting the date and time Selecting the OSD language GETTING TO KNOW THE CAMCORDER 10 GETTING STARTED 17 BASIC OPERATION OF THE CAMCORDER 22 3
contents GETTING READY TO START RECORDING 27 BASIC RECORDING 32 BASIC PLAYBACK 37 ADVANCED RECORDING 43 ADVANCED PLAYBACK 50 4 27 28 30 31 31 32 34 35 Inserting/ejecting a memory card (not supplied) Selecting a suitable memory card (not supplied) Recordable time and capacity Using the hand strap Using the lens 36 Recording videos Recording photos Capturing photos during video recording (dual recording) Zooming in and out 37 38 41 Changing the playback mode Playing videos Viewing photos 43 43 44
54 55 55 56 56 57 57 58 59 59 60 61 62 63 63 64 Using the setting menu tab Setting menu items Storage Info File No.
quick start guide This quick start guide introduces the basic operation and features of your camcorder. See the reference pages for more information. You can record videos in H.264 format! You can record videos in the H.264 format that are convenient to email and share with your friends and family. You can also take photos with your camcorder. STEP 1: Get ready 1. Pull to open the battery cover in the direction of the arrow as shown in the figure. ¬page 17 2. Insert a memory card.
Recording videos Recording photos Your camcorder uses advanced H.264 compression technology to give you the clearest video quality. Your camcorder can record high quality photos with a 4:3 or 16:9 aspect ratio. 1. Press the Power ( ) button. 2. While in the STBY mode, touch the Recording start ( ) tab on the LCD screen to start recording. • To stop recording, touch the Recording stop ( ) tab. 1. Press the Power ( ) button. 2.
quick start guide STEP 3: Play back videos or photos Viewing videos or photos on the LCD screen You can find recordings quickly by using the thumbnail index view. 1. Press the Mode ( ) button to select the play mode. 2. Touch the video or photo thumbnail ( / ) tab, and then touch the thumbnail of the video or photo you want to view. • The recorded videos or photos appear in the thumbnail index view. • The thumbnail of the latest created or played file is highlighted.
Importing videos/photos from your camcorder and viewing them on your PC NU 2. Any new files are saved to your PC and registered to “Contents Manager” in the Intelli-studio program. • You can arrange the files by different options such as Face, Date, Location, etc. ME 1. Start the Intelli-studio program by connecting the built-in USB plug of the camcorder to the PC. • A new file saving screen appears with the Intelli-studio main window. Click “Yes.” The uploading procedure starts.
getting to know the camcorder WHAT'S INCLUDED WITH YOUR CAMCORDER Your new camcorder comes with the following accessories. If any of these items are missing from your box, call Samsung’s Customer Care Center. MENU Model name Color HMX-E10WN White HMX-E10BN Black HMX-E10ON Orange Memory card slot LCD screen Lens Yes Color Digital zoom: x2 • The shape is the same for all models. Only the color is different.
LOCATION OF CONTROLS Rear & Right side MENU Lens Mode ( ) button LCD screen MENU button Power ( ) button 11
getting to know the camcorder Front/Right/Bottom side Built-in speaker Battery cover open hole Internal microphone CHG (Charging) indicator Battery cover Built-in USB plug Jack cover 12 Tripod receptacle Built-in USB eject button HDMI jack Battery slot Memory card slot Hand strap hook Be careful not to cover the internal microphone and lens during recording.
IDENTIFYING THE SCREEN DISPLAYS The available functions vary depending on the operation mode you’ve selected. Different indicators appear depending on the setting values. PRECHECK! • This On Screen Display (OSD) is shown only when the camcorder is in Video Record mode. • Select the Record mode by pressing the Mode ( ) button. ¬page 23 Video Record mode 1 2 1 2 3 4 5 3 0:00:01 4 5 6 x2.0 # % [99Min] $ 6 7 8 9 @ 0 6 7 8 9 10 11 12 13 14 15 +"/ ".
getting to know the camcorder PRECHECK! • This On Screen Display (OSD) is shown only when the camcorder is in Photo Record mode. • Select the Record mode by pressing the Mode ( ) button. ¬page 23 Photo Record mode 1 2 4 3 1 2 3 4 5 6 7 [99Min] 9999 8 9 +"/ ". 0 7 14 Photo resolution Smart Filter Half shutter Storage media (Memory card) 5 Battery info.
PRECHECK! • This On Screen Display (OSD) is shown only when the camcorder is in Video Play mode. • Select the Play mode by pressing the Mode ( ) button, and then touch the Video ( ) tab. ¬page 23 Video play mode : Thumbnail View 2 1 0 3 4 9 5 8 7 1 2 3 4 5 6 7 8 9 10 Video Play mode Battery info.
getting to know the camcorder PRECHECK! • This On Screen Display (OSD) is shown only when the camcorder is in Photo Play mode. • Select the Play mode by pressing the Mode ( ) button, and then touch the Photo ( ) tab. ¬page 23 Photo play mode : Thumbnail View 1 2 9 3 4 8 7 6 1 2 3 4 5 6 7 8 9 Photo play mode Battery info.
getting started USING THE BATTERY Purchase extra batteries to allow continuous use of your camcorder. 2 1 Inserting the battery 3 Ejecting the battery 1. Pull the battery cover in the direction of the arrow as shown in the figure to open. 1. Pull the battery cover in the direction of the arrow as shown in the figure to open. 2. Push in the battery in the direction of the arrow as shown in the figure.
getting started Charging the battery PRECHECK! • Be sure to charge the battery before you start using your camcorder. • You can charge the camcorder’s battery with the built-in USB plug of the camcorder or the USB charger (not supplied). MODE MODE 2 2 MODE MENU 3 1. Press the Power ( ) button to turn off the camcorder. 2. Open the Jack cover and press the [USB eject] button to pop out the built-in USB plug. 3. Connect the built-in USB plug of the camcorder to the USB port of a PC.
CHECKING THE BATTERY STATE You can check the charging state and remaining battery capacity. To check the charging state The color of the LED indicates the power or charging state. MENU Charging (CHG) indicator The color of the charging indicator shows the charging state. Charging state LED color CHG CHG Charging Fully charged Error (Orange) (Green) (Orange Blink) Battery level display The battery level display shows the amount of battery power remaining in the battery.
getting started Available running time for the battery Battery type BP90A Charging time Approx. 190 min. (Use the Built-in USB plug) Mode Continuous recording time Playback time 1080/30P Approx. 80 min. Approx. 140 min. 720/30P Approx. 90 min. Approx. 150 min. Resolution • Charging time: Approximate time in minutes (min.) required to fully charge a completely exhausted battery. • Recording/Playback time: Approximate time available when you have fully charged the battery.
• Charge an extra battery before using the camcorder outdoors. - The cold temperature may shorten the length of time you can use the battery before needing to recharge it. • Check whether the battery terminal is damaged if the battery falls or is dropped. - If you install a battery with the damaged terminal into the camcorder, you can damage the camcorder. • Throw away the dead battery into a recycling bin. • The battery lifetime is limited. - Battery capacity decreases over time and through repeated use.
basic operation of the camcorder This chapter introduces you to the basic operation procedures of this camcorder, such as turning the power on/off and switching modes. TURNING YOUR CAMCORDER ON/OFF You can turn the power on or off by pressing the Power ( ) button. MENU Power ( ) button • This camcorder provides one record mode for both video and photo recordings. You can easily record videos or photos in the same mode without having to switch modes.
SETTING THE OPERATING MODES You switch the operating mode in the following order each time you press the Mode ( ) button: Record mode ↔ Play mode • You can choose the video or photo thumbnail view display options by touching the Video ( ) or Photo ( ) tab on the LCD screen. • When switching to play mode, you can enjoy landscape playback by rotating the camcorder from a vertical to a horizontal position. MENU Play tab ( / ) Mode ( Mode Play mode Functions To record videos or photos.
basic operation of the camcorder USING THE TOUCH PANEL Touch Drag 0:00:05/0:00:50 100-0001 JAN/01/2010 12:00 AM Drag the image left or right on the LCD screen to go to the previous or next file. MENU Slightly touch the items or functions to select or execute with your finger. MENU MENU The touch panel lets you play back and record with a simple touch of your finger. Hold the camcorder firmly in one hand to support it. Then, touch the items displayed on the screen.
first time settings TURNING THE POWER ON FOR THE FIRST TIME AND SETTING THE DATE AND TIME Set the date and time of your local area when you turn on the camcorder for the first time. 1. Press the Power ( ) button to turn on the camcorder. • When you turn on your camcorder for the first time, the Date/Time Set screen appears. 2. Set the date and time by touching the corresponding item or ) or Down ( ) tabs. dragging the Up ( Date/Time Set Month Day Year qhu 01 2010 Hr Min 12 00 AM 3.
first time settings SELECTING THE OSD LANGUAGE You can select the language in which the camcorder displays the menu screen and the messages. The language setting is retained when the camcorder is powered off. 1. Press the MENU button, and then touch the Setting ( 2. Drag up/down or touch the Previous ( “Language” is displayed. ) or Next ( ) tab. ) tab until 3. Touch “Language,” and then touch the desired OSD language. • The menu screen and messages are displayed in the language you selected. 4.
getting ready to start recording INSERTING/EJECTING A MEMORY CARD (NOT SUPPLIED) 1 2 To insert a memory card To eject a memory card 1. Pull the battery cover in the direction of the arrow as shown in the figure to open. 1. Pull the battery cover in the direction of the arrow as shown in the figure to open. 2. Insert the memory card into the card slot until it softly clicks. • Make sure that the terminal portion is facing down and the camcorder is placed as shown in the figure. 2.
getting ready to start recording SELECTING A SUITABLE MEMORY CARD (NOT SUPPLIED) Compatible memory cards • Use micro SD (micro Secure Digital) and micro SDHC (micro Secure Digital High Capacity) cards with this camcorder. We recommend you use a micro SDHC (Secure Digital High Capacity) card. The camcorder supports micro SD cards up to 2GB. We can not guarantee normal operation with micro SD cards bigger than 2GB.
Handling a memory card • We recommend that you power off before inserting or removing the memory card to avoid data loss. • You have to format newly-purchased memory cards, memory cards with data that your camcorder cannot recognize or with data saved by other devices. Note that formatting erases all data on the memory card and deleted data cannot be recovered. • A memory card has a certain life span. If you cannot record new data, you have to purchase a new memory card.
getting ready to start recording RECORDABLE TIME AND CAPACITY • The following tables show the camcorder's maximum recording time and number of images by video or photo resolution and memory card capacity. • Please note the approximate maximum limits for recording videos and photos.
USING THE HAND STRAP Attach the strap and place your hand through the loop to prevent the camcorder from being dropped. MENU You can easily attach the strap through the loop when holding the very end of the strap. USING THE LENS You can easily record images of yourself or others from various angles by using the 270° rotating lens. mF2:. 7 m2 9. f= 1. Align your subject in the frame. MENU 2. By turning the lens, the 270° rotating lens adjusts freely to your desired recording angle.
basic recording RECORDING VIDEOS • • This camcorder supports High Definition (HD) image resolution. Set the resolution you want before recording. ¬page 44 This camcorder provides one record mode which combines the video and photo record modes. You can easily record videos or photos in the same mode without having to change it. PRECHECK! • Insert a memory card. ¬page 27 • Select the record mode by pressing the Mode ( ) button. ¬page 23 1. Select a subject to record.
• If the power is off or any error occurs during recording, the camcorder may not record the video. • Samsung is not responsible for any damage resulting from a failure of normal recording or playback operation caused by memory card error. • Do not turn off the camcorder or remove the memory card while accessing the storage media. Doing so may damage the storage media or the data in the storage media. Note that damaged data cannot be recovered.
basic recording RECORDING PHOTOS You can take photos and store them in the storage media. Set the resolution you want before recording. ¬page 45 PRECHECK! • Insert a memory card. ¬page 27 • Select the record mode by pressing the Mode ( ) button. ¬page 23 1. Select a subject to record. • Adjust the 270° rotating lens to the best angle for recording. • Touch the Zoom lever on the LCD screen to adjust the size of the subject. ¬page 36 2.
CAPTURING PHOTOS DURING VIDEO RECORDING (DUAL RECORDING) Your camcorder can capture photos without interrupting video recording. It is convenient to record a video and photo at the same time without switching modes. 1. Touch the Recording start ( ) tab on the LCD screen in STBY mode. • The recording (z) indicator appears, and video recording starts. y The number of recordable capturing photos appear next to the Photo ( 6 ) tab on the LCD screen. 0:00:01 [99Min] 2.
basic recording ZOOMING IN AND OUT • Use the zoom function for close-up or wide-angle recording. • Using the Zoom lever, you can record with digital zoom. To zoom in Slide the Zoom lever ( ) towards T (telephoto). • The distant subject is gradually magnified. • This camcorder provides the zoom magnification as follows. - Digital zoom: x2 To zoom out Slide the Zoom lever ( ) towards W (wide angle). • The subject appears smaller and further away.
basic playback CHANGING THE PLAYBACK MODE You can set the record mode and the play mode in turn with the Mode ( ) button. When you shift to the play mode, the most recently created file is highlighted in the thumbnail view. The camcorder automatically selects the thumbnail display options depending on the STBY mode you used the last time. However, you can choose the video or photo thumbnail view display options by touching the Video ( ) or Photo ( ) tab on the LCD screen.
basic playback PLAYING VIDEOS You can find the videos you want quickly using the thumbnail index view. PRECHECK! • Insert a memory card. ¬page 27 • Select the play mode by pressing the Mode ( ) button. ¬page 23 1. Touch the Video ( ) tab. • Video thumbnails appear on the screen. • To change the current thumbnail page, drag up/down or touch the Previous ( ) or Next ( ) tab. 2. Touch the thumbnail of the video you want to play. • The camcorder plays the selected video and playback control tabs appear briefly.
Do not power off or eject the memory card during video playback. Doing so may damage the recorded data. • The following video files may not play back on the camcorder: - Video files with formats that are not supported by the camcorder. • When you connect the HDMI cable to the camcorder while playing a video, the display will switch to the thumbnail index view automatically. • You can play back recorded video on a TV or a PC.
basic playback Various playback operations Playback / Pause ( X/ ZZ ) y Playback and pause alternates when you touch the Play ( )/ Pause ( ) tab during playback. y Touch the Return ( ) tab to stop playback and return to the thumbnail.
VIEWING PHOTOS You can view recorded photos using various playback functions. PRECHECK! • Insert a memory card. ¬page 27 • Select the play mode by pressing the Mode ( ) button. ¬page 23 1. Touch the Photo ( ) tab. • Photo thumbnails appear on the screen. • To change the current thumbnail page, drag up/down or touch the Previous ( ) or Next ( ) tab. 2. Touch the thumbnail of the photo you want to display. • The camcorder displays the selected photo in full screen and playback control tabs appear briefly.
basic playback Do not power off or eject the memory card during photo playback. Doing so may damage the recorded data. • Your camcorder may not play back the following photo files normally: - A photo with a file format not supported by this camcorder (it does not conform to DCF standards). • Loading time may vary depending on the resolution of the photo you selected. • This camcorder can support the JPEG file format. (However, note that all JPEG files are not always played back.
advanced recording USING THE MENU TAB IN THE RECORD MODE • • You can change the menu settings to customize your camcorder. Access the desired menu screen by following the steps below, and then change the various settings. MENU MENU PRECHECK! • Press the Power ( ) button to turn on the camcorder. ¬page 22 • Select the Record mode by pressing the Mode ( ) button. ¬page 23 Using the Menu Tab: An Example 1. Press the MENU button in STBY mode. • The menu screen appears. 2.
advanced recording Video Resolution You can select the resolution of the video to be recorded. PRECHECK! ) button. ¬page 23 Select the Record mode by pressing the Mode ( 1. Press the MENU button. ." 2. Touch the "Video Resolution • Touch the desired submenu item. 3. Press the MENU button to exit the menu. Submenu items • 1080/30p ( • 720/30p ( ) : Records in the HD (1920x1080 30p) format. ) : Records in the HD (1280x720 30p) format.
Photo Resolution You can select the resolution of the photo to be recorded. PRECHECK! Select the Record mode by pressing the Mode ( ) button. ¬page 23 1. Press the MENU button. ." 2. Touch the "Photo Resolution • You can move to the desired item by touching the • Touch the desired submenu item. 3. Press the MENU button to exit the menu. / tab.
advanced recording Smart Filter By applying special effects, you can add fun and character to an image. You can apply various filter effects to create unique images. PRECHECK! Select the Record mode by pressing the Mode ( ) button. ¬page 23 1. Press the MENU button. ." 2. Touch the "Smart Filter • You can move to the desired item by touching the • Touch the desired submenu item. 3. Press the MENU button to exit the menu. / tab.
Smart Filter Examples Normal Miniature Sketch Defog Vignetting • If you apply the Miniature filter when recording a video, recording starts with a guide message displayed. For such recorded video, its playback time is shorter than the time consumed for recording it. • If you apply the Miniature filter when recording a video, the camcorder does not record sound.
advanced recording Panorama The Panorama function lets you capture a wide landscape or tall building in a single picture by holding the Photo tab down and moving or turning the camcorder slowly in one direction. PRECHECK! Select the Record mode by pressing the Mode ( ) button. ¬page 23 Panorama 1. Press the MENU button. On " t"On" 2. Touch the "Panorama • Press the MENU button to return to the STBY mode. 3. Touch the Photo ( ) tab to start recording. 4.
Quick View Using the Quick View function, you can view the most recently recorded video and photo images as soon as the recording is finished. Quick View On PRECHECK! Select the Record mode by pressing the Mode ( ) button. ¬page 23 On Off 1. Press the MENU button. 2. Touch the "Quick View ." • Touch the desired submenu item. 3. Press the MENU button to exit the menu.
advanced playback USING THE MENU TAB IN THE PLAY MODE • • You can change the menu settings to customize your camcorder. Access the desired menu screen by following the steps below, and then change the various settings. MENU MENU PRECHECK! • Press the Power ( ) button to turn on the camcorder. ¬page 22 • Select the Play mode by pressing the Mode ( ) button. ¬page 23 Using the Menu Tab: An Example 1. Touch the Video ( ) or Photo ( • Touch the desired image. 2. Press the MENU button.
DELETING FILES You can erase your recordings one by one, or all at once. PRECHECK! • Insert a memory card. ¬page 27 • Select the Play mode by pressing the Mode ( the Video ( ) or Photo ( ) tab. ¬page 23 ) button, and then touch Delete Protect Share Settings 1. Press the MENU button. 2. Touch the “Delete ” and then the desired submenu item. • If you touch “Select Files”, you will see image thumbnails. Go to Step 3. • If you touch "All Files", you will see the message that corresponds to that option.
advanced playback PROTECTION FROM ACCIDENTAL ERASURE You can protect important recordings from accidental erasure. You can not delete the protected videos and photos unless you cancel the protection or format the storage medium. PRECHECK! • Insert a memory card. ¬page 27 • Select the Play mode by pressing the Mode ( ) button, and then touch touch the Video ( ) or Photo ( ) tab. ¬page 23 1. Press the MENU button. ” and then the desired submenu item. 2.
Share Mark You can set the share mark on a video and directly upload the marked file to the YouTube site. PRECHECK! • Insert a memory card. ¬page 27 • Select the Play mode by pressing the Mode ( ) button, and then touch the Video ( ) tab. ¬page 23 1. Press the MENU button. ” and then the desired submenu item. 2. Touch the “Share Mark • If you touch “Select Files”, you will see image thumbnails. Go to Step 3. • If you touch "All On" or "All Off", you will see the message that corresponds to that option.
system setting USING THE SETTING MENU TAB • You can change the menu settings to customize your camcorder. • Access the desired menu screen by following the steps below, and then change the various settings. MENU PRECHECK! Insert a memory card. ¬page 27 Using the Menu Tab: An Example 1. Press the MENU button in the record or the play mode. • The menu screen appears. 2. Touch the "Settings ." 3.
SETTING MENU ITEMS • • You can setup the date/time, OSD language, and display settings of the camcorder. For operation details, see the page under Page in the table below. Items Storage Info File No.
system setting File No. The camcorder assigns file names (numbers) are assigned to recorded images according to the option you select. 1. Press the MENU button. Settings Storage Info " “File No.” 2. Touch the "Settings • Touch the desired submenu item. File No. Date/Time Set 3. To exit the menu, touch the Return ( ) tab. Date/Time Display Submenu items • Series : Assigns file numbers in sequence even if you replace the memory card with another one, format the card, or delete all files.
Date/Time Display You can set the Date/Time Display function so that the date and time appear on the LCD screen. Before you use the "Date/Time Display" function, you must set the date and time. ¬page 25 1. Press the MENU button. Settings " “Date/Time Display.” 2. Touch the "Settings • Touch the desired submenu item. 3. To exit the menu, touch the Return ( ) tab. • The date/time is displayed on the LCD screen according to the selected option. Storage Info File No.
system setting Auto LCD Off To reduce power consumption, the camcorder automatically dims the brightness of the LCD screen if the camcorder is idle for a period of time. 1. Press the MENU button. Settings LCD Brightness " “Auto LCD Off.” 2. Touch the "Settings • Touch the desired submenu item. 3. To exit the menu, touch the Return ( Auto LCD Off Beep Sound Shutter Sound ) tab. Submenu items • Off : Disables the function.
Beep Sound You can set the beep sound on or off. If you hear a beep sound when operating the menu settings, Beep Sound is turned on. 1. Press the MENU button. Settings LCD Brightness " “Beep Sound.” 2. Touch the "Settings • Touch the desired submenu item. Auto LCD Off Beep Sound 3. To exit the menu, touch the Return ( ) tab. Shutter Sound Submenu items • Off: The beep sound is off. • On: You will hear a beep sound when operating buttons or tabs on the LCD screen.
system setting Auto Power Off To save battery power, you can set the "Auto Power Off" function to 5 Min. This setting turns off the camcorder if there is no operation for five minutes. 1. Press the MENU button. Settings 2. Touch the "Settings " “Auto Power Off.” • Touch the desired submenu item. 3. To exit the menu, touch the Return ( ) tab. Auto Power Off PC Software Format Default Set Submenu items • Off: The camcorder does not turn off automatically.
PC Software If you set PC Software to On, you can use the built-in video and photo management software (Intelli-studio) by connecting the built-in USB plug on the camcorder to your PC. With this software, you can download stored video and photo images from the camcorder to your PC’s hard disk and edit the video and photo files on your PC’s screen. 1. Press the MENU button. Settings 2. Touch the "Settings " “PC Software.” • Touch the desired submenu item. 3. To exit the menu, touch the Return ( ) tab.
system setting Format The format function deletes all files (including protected files) and options on the storage media. You can also use this function if you want to correct problems with the storage media. PRECHECK! Insert a memory card. ¬page 27 1. Press the MENU button. " “Format.” 2. Touch the "Settings • A message appears asking for your confirmation. 3. Touch the “Yes” p “Yes.” • The camcorder formats the storage media and displays a formatting message.
Default Set You can re-set your camcorder’s settings to the factory defaults (initial settings at the factory). 1. Press the MENU button. " “Default Set.” 2. Touch the "Settings • A message appears asking for your confirmation. Settings Auto Power Off PC Software Format 3. Touch "Yes" if you want all the settings returned to the default. Default Set 4. Set the date and time again. ¬page 25 • Do not turn off the power while initializing the settings.
system setting Demo Demo mode automatically shows you the major functions that are included in your camcorder so that you can use them more easily. 1. Press the MENU button. Settings Format " “Demo.” 2. Touch the "Settings • Touch the desired submenu item. Default Set Language 3. To exit the menu, touch the Return ( ) tab. Demo Submenu items • Off: Disables the function. • On: Enables the Demo function.
using with a Windows computer WHAT YOU CAN DO WITH A WINDOWS COMPUTER You can perform the following functions by connecting your camcorder to your Windows computer with the built-in USB plug and using the Intelli-studio software built into your camcorder. Main functions • Intelli-studio editing software main functions: - Playing back recorded videos or photos. ¬page 68 - Editing recorded videos or photos. ¬page 68 - Uploading the recorded videos and photos to Youtube, Flickr, FaceBook, etc.
using with a Windows computer USING THE Intelli-studio PROGRAM Using the Intelli-studio program built into your camcorder, you can transfer video and photo files to your PC and edit them on your PC screen. Intelli-studio offers the most convenient way for you to manage your video and photo files. NU ME Step 1. Connecting the USB plug 1. Set “PC Software: On.”¬page 61 • This is the default setting. Settings 2. Connect the built-in USB plug of the camcorder to the USB port of the PC.
Step 2. About the Intelli-studio main window When Intelli-studio starts up, thumbnails of videos and photos are displayed in the main window. 4 1 2 3 5 6 ! 0 7 9 8 1. Menu items 2. Switches to Library of the computer and connected camcorder. 3. Switches to Photo Edit mode. 4. Switches to Movie Edit mode. 5. Switches to Share mode. Changes the size of thumbnails. 6. Displays all files (videos and photos). Displays video files only. Displays photo files only. Displays voice files only. 7.
using with a Windows computer Step 3. Playing back videos or photos You can play back recordings conveniently using the Intelli-studio application. 1. Run the Intelli-studio program. ¬page 66 2. Click the desired folder to display your recordings. • Video or photo thumbnails appear on the screen, depending on the folder you selected. 3. Choose the video or photo that you want to play. • You can view the file information by moving the mouse over the thumbnail.
Step 5. Sharing the videos/photos online Share your contents with the world by uploading photos and videos directly to a web site with one click. 1. Select the videos or photos you want to share. 2. Click “Share” on the Intelli-studio browser. • The selected file appears on the sharing window. 3. Click the web site you would like to upload files to. • You can choose “YouTube,” “Flickr,” “Facebook,” or another web site you want to use for your uploading management. 4. Click “Upload” to start uploading.
using with a Windows computer Upload your videos directly to YouTube ! The One-Touch Share tab lets you directly upload and share your videos on YouTube. Just touch the Share tab while your camcorder is connected to a Windows computer using the built-in USB plug. Step 1 On the camcorder, select a video you want to upload in the video thumbnail index view using the Share ( ) tab in the menu. ¬page 53 Repeat for each video you want to upload. ) appears on each video.
Installing Intelli-studio on a Windows computer • The Intelli-studio application will run faster if you install it on your Windows computer. Also, if you install it on your computer, it can be updated automatically. • Follow these directions to install Intelli-studio onto your Windows computer: Click “Tool” t “Install Intelli-studio on PC” on the Intelli-studio screen, and then follow the steps below.
using with a Windows computer USING AS A REMOVABLE STORAGE DEVICE You can transfer or copy recorded data from the camcorder to a Windows computer by connecting the camcorder’s built-in USB plug to the computer’s USB port. Viewing the contents of the storage media 1. Set “PC Software: Off.” ¬page 61 2. Insert a memory card. 3. Connect the built-in USB plug of the camcorder to the USB port of the PC. ¬page 66 • The “Removable Disk” or “Samsung” window appears on the PC’s screen after a moment.
Structure of folders and files on the storage media • The folder and file structure for storage media is below. • File naming follows DCF (Design rule for Camera File System) rules. Video file (H.264) • The HD-quality (1920x1080 30p or 1280x720 30p) videos have an HDV_####.MP4 format. • The file number automatically increases when a new video file is created. • Up to 9,999 files can be stored in one folder. The camcorder creates a new folder when the number of files in a folder exceeds 9,999.
connecting to other devices CONNECTING TO A TV You can view videos and photos you recorded on a large screen by connecting the camcorder to an HDTV or Standard TV that supports HDMI. PRECHECK! Insert a memory card. ¬page 27 Using a mini HDMI cable (not supplied) To play back the HD-quality (1080/30p or 720/30p) videos, you need an HDTV (high definition TV). Camcorder HDTV MENU Signal flow Mini HDMI Cable (not supplied) 1.
Understanding the HDMI cable HDMI (High Definition Multimedia Interface) is a compact audio/video interface for transmitting uncompressed digital data. • You can use only a C to A type mini HDMI cable with this camcorder. • The HDMI jack on the camcorder provides output only. • Use only HDMI 1.3 cable when connecting to the HDMI jack of this camcorder. If you connect using HDMI cable that is not version 1.3 compatible, the screen display may not work. • Do not use excessive force when connecting the cables.
troubleshooting Before contacting a Samsung authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. WARNING INDICATORS AND MESSAGES Power source Message Icon Informs that ... Low Battery - The battery is almost discharged. Check the authenticity of this battery - The battery can not pass authenticity check. Action • Charge the battery by attaching the camcorder to a PC using the built-in USB plug.
Recording Message Icon Informs that ... Action Write Error - Problems occurred while writing data to the storage media. • Back up important files on the storage media to your PC, and then format the storage media using the camcorder. Cannot record video on panorama mode. - This function is not supported by this camcorder. • This function is available only in the photo record mode. Camera moved too quickly, or subject is too close. Move camera more slowly.
troubleshooting SYMPTOMS AND SOLUTIONS If these instructions do not solve your problem, contact your nearest Samsung authorized service center. Power Symptom Explanation/Solution The camcorder does not turn on. • Charge the battery by attaching the camcorder to a PC using the built-in USB plug. The power automatically turns off. • Is “Auto Power Off” set to “5 Min”? If no button is pressed for about 5 minutes, the camcorder automatically turns off.
Storage Media Symptom Explanation/Solution Memory card functions are not operable. • Insert a memory card into your camcorder properly. ¬page 27 • If you are using a memory card formatted on a computer, format it again directly on your camcorder. ¬page 62 Image cannot be deleted. • You cannot delete protected images. Remove protection from the image. ¬page 52 You cannot format the memory card. • Copy all important recorded files to your PC before formatting.
troubleshooting Recording Symptom 80 Explanation/Solution The recording stops automatically. • There is no more free space for recording on the storage media. Back up important files on your PC and format the storage media or delete unnecessary files. • If you use a memory card with a low write speed, the camcorder automatically stops recording videos and the corresponding message appears on the LCD screen. When recording a subject illuminated by bright light, vertical lines appear.
Adjusting the image during recording Symptom It is out of focus. Explanation/Solution • This camcorder has no user-adjustable focus control function. • The minimum focal length between the camcorder and the subject is 20 cm (about 7.87 inches). Playback on your camcorder Symptom Explanation/Solution Playback (play/pause) function does not work. • Press the Mode ( ) button to set the Play mode. • Image files recorded on another camcorder may not play on your camcorder.
troubleshooting Connecting to a computer Symptom 82 Explanation/Solution Your computer does not recognize your camcorder. • Disconnect the built-in USB plug of the camcorder from the PC, restart the PC, and then reconnect camcorder correctly. Cannot play a video file properly on a PC. • You need a video codec to play the file recorded on your camcorder. Install or run the built-in editing software (Intellistudio).
General operations Symptom The date and time are incorrect. Explanation/Solution • Has the camcorder been left unused for a long period of time? The backup built-in rechargeable battery may be discharged. ¬page 25 Menu Symptom Menu items are grayed out Explanation/Solution • You cannot select grayed items in the current recording/playback mode. • If you have not inserted a memory card into the camcorder, all functions that require a memory card ("Storage Info", "Format", etc.
maintenance & additional information MAINTENANCE Cautions when storing • For safekeeping of the camcorder, turn off the camcorder. - Remove the battery. ¬page 17 - Remove the memory card. ¬page 27 LCD screen • Do not push the LCD screen too hard or strike it with anything. • When you use the camcorder in cold conditions, an afterimage may appear on the LCD screen. This is not a malfunction. • If you leave the power on for a long time, the surface around the LCD screen becomes hot.
USING YOUR CAMCORDER ABROAD • Each country or region has its own electric and color systems. • Before using your camcorder abroad, check the following items. On TV color systems Your camcorder is an NTSC based camcorder. If you want to view your recordings on a TV it must be an NTSC based TV and have an HDMI jack. Otherwise, you may need to use a separate video format transcoder (NTSC-PAL format converter) to convert the video signal. The format transcoder is not provided by Samsung.
specifications Model name HMX-E10WN/HMX-E10BN/HMX-E10ON Video signal Picture compression format Audio compression format Image device Lens Focal length NTSC H.264 (MPEG-4.AVC) AAC (Advanced Audio Coding) 1/3.2”, 8M Pixel CMOS F2.2, Digital zoom: x2 4.9mm LCD screen Size/dot number LCD screen method 2.
warranty SAMSUNG LIMITED WARRANTY SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material, SEA will repair or replace the product at it’s option. All warranty repairs must be performed by a SEA authorized service center.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, inc.