User Manual (ver.1.0)

English - 33
Changing the Position of the PIP Window
4 Press the ▲ or ▼ button to select Position, then press the ENTER button.
Press the ▲ or ▼ button to select the desired PIP
window position, then press
the ENTER button.
➢
In Double Window (
) and Double Wide (
) modes, Position cannot
be selected.
➢
If the PIP window is set to Double Window (
) or Double Wide (
)
mode, the screen size or alignment may slightly differ depending on the
signal type.
Changing the PIP
Channel
5 Press the ▲ or ▼ button to select Channel, then press the ENTER button.
Press the ▲ or ▼ button at the bottom of the remote to select the desired
channel in the PIP
window, then press the ENTER button.
➢
The channel can be active when the sub picture is set to TV.
Press the EXIT button to exit.
Press the PIP CH and CH and buttons on the remote control to change the PIP
channel.
Freezing the Current Picture
1 Press the STILL button to freeze a moving picture.
➢
Normal sound will still be heard. Press again to cancel.
➢
To prevent screen burn-in, this function will automatically cancel after 5
minutes.
RETURN
FAV.CH
PIP : On
Size :
Position :
Channel : DTV Air 3 - 0
PIPT V
Enter
Move
Return
PIP : On
Size :
Position :
Channel : DTV Air 3 - 0
PIPT V
DTV Air 3 - 0
▲
▲
Enter
Move
RETURN
FAV.CH
Return
BN68-01192F-02Eng-1.indd 33 2007-02-26 ｿﾀﾈﾄ 3:18:31