User Manual

12_ getting started
getting started
SHUTTING DOWN THE SYSTEM
1. Select <Shutdown> at the top right of the screen.
2. The <Shutdown> window will appear.
3. Click on <OK>.
The system will shut down.
RESTARTING THE SYSTEM
1. Select <Restart> at the top right of the screen.
2. The <Restart> window will appear.
3. Click on <OK>.
The system will restart.
￭
Only the user with the "Shutdown/Restart" permission can shut down or restart the system.
￭
To manage Permission Setup, refer to the "Setup > Setting the system > User" page in the Table of Contents.
LOGIN
To use the Recorder menu, you are required to login as a user that is authorized to access the applicable menu.
1. Select <Login> at the top right of the screen.
2. The <Login> window will appear.
3. Enter the user ID and password, then click <Login>.
￭
The initial administrator ID is "admin" and you will need to configure the password in the installation wizard.
￭
Please change your password every three months to safely protect personal information and to prevent the damage of the information theft. Please,
take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.
￭
For more information about limited-access permission, refer to the "Setup > Setting the System > User" page in the Table of Contents.