User Manual

English _17
LIVE SCREEN MODE
You can display your camera's live video in various split modes.
󽛭
If the analog camera has been automatically registered, it is displayed using the camera resolution.
￭
The 'Live4NVR' profile is added automatically with network camera auto registration, and settings can be changed according to user
environment.
￭
Live4NVR Profile Basic Settings : H.264 (codec), 800 x 600 or 800 x 448 (resolution), 30fps (frame rate)
￭
Depending on camera specification, you may not be able to add a profile or if you have the PLUGINFREE profile, you will not be able to add the Live4NVR
profile.
￭
When system overloaded and the performance is down, network camera may play only main frame(I-frame).
￭
To set profiles, refer to "Setup > Setting the Camera > Setting the Profiles" page in the Table of Contents.
Changing the Pattern of Split Screen
To change the split mode, click < > at the bottom of the screen to select the desired split mode.
￭
Each product may support different split view modes.
CH1
CH1
CH2
CH1 CH2
CH1 CH2 CH3
Single mode Horizontal 2-split screen Vertical 2-split screen Vertical 3-split screen
CH1 CH2
CH3 CH4
CH2
CH1 CH3
CH4 CH5 CH6
CH2
CH3
CH1 CH4
CH5 CH6 CH7 CH8
CH1 CH2 CH3
CH4 CH5 CH6
CH7 CH8 CH9
4-split mode 6-split mode
(1+5 split mode)
8-split mode
(1+7 split mode)
9-split mode
CH2 CH3 CH4 CH5
CH6 CH7
CH8 CH1 CH9
CH10 CH11 CH12 CH13
CH1 CH2 CH3 CH4
CH5 CH6 CH7 CH8
CH9 CH10 CH11 CH12
CH13 CH14 CH15 CH16
13-split mode
(1+12 split mode)
16-split mode
• LIVE