User Manual
English _23
Play Layout Sequence
Click < Play sequence> at the bottom of the layout list to automatically switch the layout according to the
sequence settings.
￭
<Play sequence> is active only when a sequence is set.
REALTIME EVENT MONITORING
Real-time events that occurred on the camera can be checked in the live video window and event list.
Check Event List
Click < Event> on the left side of the live screen to display the real-time event list.
￭
When new events occur, the list of events will be updated accordingly.
￭
The specified channels and events are displayed in the list according to the event rule setup.
For details, refer to the "Setup > Setting the Event > Event rule setup" page in the Table of Contents.
●
: Browses for the event by the desired condition.
●
: Plays the video at the time of the event.
￭
When an alarm output occurs, if event recording is set and pre-event time and post-event time are set, event recording is performed before or
after the event according to the set recording method. For more information about event recording settings, refer to the "Setup > Setting the
Recording > Record setup" page in the Table of Contents.
￭
The video may be delayed depending on the network condition.
￭
The event output can be delayed as the transfer of the alarm event from the network camera takes time.
• LIVE