User Manual

28_ live
live
PTZ CONTROL
With this Recorder, you can configure the settings of a PTZ camera as well as commercial cameras in the market to your
preference.
This is active only if a channel that a PTZ camera is connected to is selected.
Getting Started with PTZ Operations
The PTZ camera will be activated only if the channel of the PTZ camera is selected. After selecting the desired
channel, click <
> on the live screen menu.
￭
This is available only if a PTZ camera is connected and the < > icon is displayed on the screen.
￭
Even if the connected network camera does not support the PTZ operations, you can configure the PTZ control settings (if possible) by installing
the PTZ driver (physical device).
￭
It supports only the Hanwha Techwin PTZ function network camera, ONVIF registration network camera, RS485/422(Samsung-T, Pelco-D,
Pelco-P), and coaxial analog camera.
PTZ Control Menu
You can use a single PTZ camera to perform the Pan, Tilt and Zoom operations to monitor multiple places, and
configure the custom settings of the presets in a desired mode.
Click <PTZ control
> on the bottom left of the live screen to display the PTZ camera control menu as shown
below.
Item Description
Zoom out/Zoom in Activate the Zoom operation of the PTZ camera.
Near/Far You can adjust the focus manually.
Auto focus You can adjust the focus automatically.
Open IRIS/Close IRIS Adjusts the amount of light received by the camera through IRIS.
Analog camera setup Adjust the video screen of the analog camera.
Preset
Set the preset position to move the camera, and then select the desired preset to move to the
set position.
Swing
Swing is a monitoring function that moves between two preset points and enables you to
trace the motion.
Group The group function enables you to group various presets before calling them in sequence.
Tour Monitor all the groups created by a user in turn.
Trace
Tracking remembers the trace of movements that you instructed and reproduces it for your
reference.
The preset you set is saved and displayed in the list.
Deletes the selected preset list.
Preset List Shows a list of saved presets.
￭
The PTZ working (active) mark can be active even if the PTZ operation is not available in normal mode. So ensure that you have completed the
PTZ settings before proceeding.
￭
Some cameras may differ in the menu title and operation with regard to Swing, Group, Tour and Trace.
￭
Even if your network camera supports the function, you can use it only if the button is activated in the PTZ control launcher.