User Manual (ver.1.0)

22 English
Connections
Connecting the Video Out to your TV
Choose one of the three methods for connecting to a TV.
R
ELESS
FM ANT .
HDMI OUT
AUX IN 2
COMPONENT
OUT
VIDEO
OUT
FM
ANT
.
A
UX IN
2
METHOD 1 : HDMI (BEST QUALITY)
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN
jack on your TV.
METHOD 2 : Component Video (BETTER QUALITY)
If your television is equipped with Component Video inputs, connect a Component video cable (not supplied)
from the COMPONENT OUT (Pr, Pb and Y) Jacks on the back of the product to the Component Video
Input Jacks on your TV.
METHOD 3 : Composite Video (GOOD QUALITY)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack
on your TV.
NOTE
Resolutions available for the HDMI output are 480p, 720p,1080i/1080p. See page 27 for the resolution setting.
This product operates in Interlace scan mode 480i for component/composite output.
After making the video connection, set the Video input source on your TV to match the corresponding Video
output (HDMI, Component or Composite) on your product.
Turn this product on fi rst before you set the video input source on your TV. See your TV owner's manual for
more information on how to select the TV's Video Input source.
CAUTION
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
!
METHOD1
METHOD2
METHOD3(supplied)
Green
Blue
Red
HT-C550-XAA_0607.indd 22HT-C550-XAA_0607.indd 22 2010-06-07  11:58:292010-06-07  11:58:29