HT-C6730W 7.1CH Blu-ray Home Theater System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-C6730W_XAA_0817.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within Triangle Is awarning sign alerting you of dangerous voltage Inside the product. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE.
RF Radiation Exposure Statement This equipment complies with FCC RF Radiation Exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules.
Safety Information Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Holding discs • Do not touch the playback side of the disc. • Hold the disc by the edges so that fingerprints will not get on the surface. • Do not stick paper or tape on the disc. Disc Storage • Do not keep in direct sunlight • Keep in a cool ventilated area • Keep in a clean Protection jacket.
Contents Safety Warnings Important Safety Instructions Precautions Cautions on Handling and Storing Discs License Copyright GETTING STARTED 7 8 9 13 14 14 15 16 Key features of your new Blu-ray Home Theater Icons that will be used in manual Disc Types and Characteristics Accessories Description Front Panel Rear Panel Remote control CONNECTIONS 18 23 25 26 27 28 Connecting the Speakers Connecting External Devices/your TV via HDMI Connecting the Video Out to your TV Connecting Audio from External Compon
Contents SETUP 43 43 43 43 43 43 44 44 44 General Background Energy Saving Front Display Power On/Off Sound Light Effect Support Software Upgrade Contact Samsung BASIC FUNCTIONS 45 45 46 47 47 48 50 52 53 54 54 55 55 Playing a Disc Using the Disc menu / Title menu / Popup menu Using the Search and Skip Functions Slow Motion Play/Step Motion Play Repeat Playback Using the TOOLS button Listening to Music Sound Mode Playing back a Picture Playing Back a USB Storage Device Listening to Radio Simple Playbac
01 Getting Started Getting Started Key features of your new Blu-ray Home Theater Product Features Playback of many disc types, plus an FM tuner This product allows you to play various discs, including BD-ROM/RE/R, DVD-VIDEO, DVD-RW/-R (V mode), DVD+RW/+R, MP3/WMA, JPEG, DivX/MKV/MP4, and CD-R/RW, and has a sophisticated FM tuner, all in a single player.
Getting Started Icons that will be used in manual Make sure to check the following terms before reading the user manual. Term Logo Icon h z Z BD-ROM BD-RE/-R DVD-VIDEO Definition This indicates a function available on a BD-ROM. This indicates a function available on a BD-RE/-R disc recorded in the BD-RE format. This indicates a function available on a DVD-VIDEO.
01 Getting Started Disc Types and Characteristics Logos of Discs that can be played Blu-ray Disc Compatibility Blu-ray is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Types and Characteristics section of this Manual. If you encounter compatibility problems, please contact the SAMSUNG customer care center at 1-800 SAMSUNG.
Getting Started Region code Disc Types Both this product and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. BD-ROM Disc Type Blu-ray DVD-VIDEO Region Code Area A North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia. B Europe, Greenland, French territories, Middle East, Africa, Australia and New Zealand. C India, China, Russia, Central and South Asia.
01 DivX (Digital video express) • An audio disc on which 44.1kHz PCM Audio is recorded. • This product can play back CD-DA format audio CD-R and CD-RW discs. • The product may not be able to play some CD-R or CD-RW discs due to the condition of the recording. DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time.
Getting Started Supported File Formats Video File Support File Extension Container *.avi Video Codec Audio Codec Resolution Divx 3.11/4.x/5.1/6.0 MP3 AC3 DTS WMA PCM 1920x1080 XviD AVI MP4v3 H.264 BP/MP/HP 1920x1080 1920x1080 1920x1080 1920x1080 VC-1 AP *.mkv DivX 5.1/6.0 MKV XviD MP3 AC3 DTS 1920x1080 1920x1080 1920x1080 H.264 BP/MP/HP *.wmv WMV (wmv9) *.mp4 MP4 *.mpg *.mpeg PS VC-1 AP 1920x1080 WMA VC-1 SM MP4 (mp4v) H.264 BP/MP/HP MPEG1 MPEG2 H.
01 Supported devices: USB storage media, MP3 player, digital camera, USB card reader 1) Does not support if a folder or file name is longer than 125 characters. 2) A subtitle file bigger than 300 KB may not be properly displayed. 3) A certain USB/digital camera device may not be compatible with the product. 4) FAT16 and FAT32 file systems are supported. • NTFS file system is not supported. 5) Photo (JPEG), music (MP3) and video file should have their names in Korean or English.
Getting Started Description Front Panel 1 2 3 4 5 6 7 8 1 2 3 4 DISC TRAY Insert disc here. DISPLAY Displays the playing status, time, etc. REMOTE CONTROL SENSOR Detects signals from the remote control. OPEN/CLOSE BUTTON Opens and closes the disc tray. 5 FUNCTION BUTTON 6 TUNING DOWN & SKIP BUTTON 7 8 STOP BUTTON Stops disc playback. PLAY/PAUSE BUTTON Plays a disc or pauses playback. 9 TUNING UP & SKIP BUTTON Goes to the next title/chapter/track. Tunes up the FM frequency band.
01 Getting Started Rear Panel 1 2 3 4 5 6 7 DIGITAL AUDIO IN HDMI IN 8 9 10 FM ANT LAN WIRELESS 11 12 COMPONENT OUT HDMI OUT iPod OPTICAL SPEAKER IMPEDANCE : 3 VIDEO OUT 1 SPEAKER OUTPUT CONNECTORS Connect the front, center, surround back, subwoofer speakers. 2 COOLING FAN The cooling fan supplies cool air to the product to prevent overheating and always revolves when the power is on. 3 iPod JACK Connect the iPod dock connector here.
Getting Started Remote control Tour of the Remote Control POWER FUNCTION TV SOURCE BD RECEIVER/TV SLEEP Turn the product on and off. If you want to change to Home Theater or TV mode on the remote control, check this button's LED color. - Home Theater : Orange Press numeric buttons to operate options. Use to select the mode. or Press to select TV's video mode. Set a Sleep time to shut off the procuct. To open and close the disc tray.
01 * Battery size: AAA TV Brand Code List Brand Code Brand Code Admiral (M.Wards) 56, 57, 58 Mitsubishi/ MGA 18, 40, 59, 60, 75 A Mark 01, 15 MTC 18 NEC 18, 19, 20, 40, 59, 60 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Nikei 03 Onking 03 01, 18, 40, 48 Onwa 03 Panasonic 06, 07, 08, 09, 54, 66, 67, 73, 74 AOC ✎ NOTE Make sure to match the “+” and “–” ends of Bell & Howell (M.
Connections This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers 2~3m BD Installing the DPL IIx Position of the product 2~3m BD Installing the DPL IIz Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.
02 Connections Speaker Components Assembled Speakers (L) (R) SCREW (5x15): 2EA SCREW (4x20): 8EA CENTER SPEAKER STAND FRONT CENTER STAND BASE (L) (R) (L) (R) FRONT SPEAKER SUBWOOFER SUBWOOFER SURROUND SURROUND BACK SPEAKER CABLE SURROUND SPEAKER SURROUND BACK SPEAKER SWA-5000 TX Card Wireless Receiver Module Speaker Cable (2EA) ✎ NOTE Refer to page 20 to install the Speakers on the Tallboy Stand. English HT-C6730W_XAA_0817.
Connections Installing the Speakers on the Tallboy Stand 1. Turn the Stand Base upside-down and connect it to the Stand. 1 Stand Base Stand 2. Insert small screws (4x20, For connecting Stand & Stand Base) clockwise into the four holes marked using a screwdriver as shown in the illustration. 2 ! CAUTION When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm) 3.
02 Connections Connecting The Speakers 1. Press down the terminal tab on the back of the speaker. 2. Insert the black wire into the black terminal (–) and the red wire into the red (+) terminal, and then release the tab. 3. Connect the connecting plugs to the back of the product by matching the colors of the speaker plugs to the speaker jacks. 4. With the product turned off, insert the TX card into the TX Card Connection (WIRELESS) on the back of the product.
Connections ! CAUTION Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct. Keep the subwoofer speaker out of reach of children to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker. Do not hang the subwoofer on the wall through the duct (hole).
02 Connections Connecting External Devices/your TV via HDMI HDMI is the standard digital interface for connecting to devices such as a TV, projector, DVD player, Blu-ray player, set top box, and more. Becuase HDMI is all digital, you'll enjoy digital quality video and sound as it was originally created, without the distortions that can be caused when digital content is converted to analog.
Connections Connecting External Devices/your TV via HDMI HDMI IN : Connecting to an External Component with an HDMI Cable 1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. 2. Press the FUNCTION button to select HDMI 1 or HDMI 2 input. The mode switches as follows : BD/DVD D.
02 Connections Connecting the Video Out to your TV Red Blue Green METHOD 1 LAN COMPONENT OUT METHOD 2 Yellow VIDEO OUT METHOD 1 : Component Video (BETTER QUALITY) If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (Pr, Pb and Y) jacks on the back of the product to the Component Video Input Jacks on your TV.
Connections Connecting Audio from External Components LAN DIGITAL AUDIO IN HDMI IN COMPONENT OUT HDMI OUT OPTICAL VIDEO OUT Red Optical Cable (not supplied) Set-Top Box OPTICAL White Audio Cable (not supplied) If the external analog component has only one Audio Out, connect either left or right. VCR AUX OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1.
02 This product enables you to view network based services (See pages 57~62) such as Internet@TV and BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend using an AP (Access Point) or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance. Connections Connecting to the Network Cable Network 1.
Connections Connecting to the Network Wireless Network Broadband service Wireless IP sharer PC Networking with PC for AllShare function (See pages 61~62) You can connect the player to your network with a Wireless IP sharer. A wireless AP/IP router is required to make a wireless network connection. To set the network options, see page 39. NOTE You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the wireless network.
03 Setup 1. Turn on your TV after connecting the product. (When the product is connected to TV for the first time, the product will turn on automatically and display the Initial Settings screen.) Initial Settings I On-Screen Language Select a language for the on-screen displays. English 7. Press the ◄► buttons to select the desired Network Settings : Wired, Wireless or PBC (WPS), and then press the ENTER button.
Setup If you want to display Initial Settings screen again to make changes, press the STOP () button on the front panel of the product for more than 5 seconds with no disc inserted. Use the HDMI cable to connect the product to an Anynet+ (HDMI-CEC)-compliant Samsung TV. If the TV uses a language supported by the product, that language will be set to a preferred language automatically. For this to work, the Anynet+ (HDMI-CEC) feature must be set to On in both TV and the product.
03 You can configure various display options such as the TV Aspect Ratio, the Resolution, etc. TV Aspect Ratio Depending on the type of television you have, you may want to adjust the screen aspect ratio. • 16:9 Normal Certain movies (4:3 source) are displayed in 4:3 Pillarbox (black bars on sides of picture) if 16:9 normal is selected. Setup Display BD Wise (Samsung Products only) BD Wise is Samsung's latest inter-connectivity feature.
Setup Resolution according to the output mode • Blu-ray Disc playback HDMI / connected Output Setup HDMI / not connected HDMI Mode Component/VIDEO Mode Component Mode VIDEO Mode Auto Optimal Resolution 480i - - 1080p, Movie Frame (24Fs) off 1080p@60F 480i - - 1080p/1080i, Movie Frame (24Fs) on 1080p@24F 480i - - 1080i, Movie Frame (24Fs) off 1080i 480i 1080i 480i 720p 720p 480i 720p 480i 480p 480p 480i 480p 480i 480i - - 480i 480i • DVD playback HDMI / connected O
03 Setup HDMI Format Progressive Mode You can optimize the color setting from the HDMI output by selecting a connected device Type: Set to improve picture quality when you view DVDs. • TV : Select if connected to a TV via HDMI. • Monitor : Select if connected to a Monitor via HDMI. ✎ NOTE A TV or monitor has to be connected to the product before you select this option.
Setup Distance Audio Speaker Setting DPL llz • Off : Select when you place the Surround Back speakers as shown. • On: Provide a more realistic 3D surround sound with vertical surround system.
03 By setting the Musical Room Calibration (MRC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.1-channel sound field optimized for your environment. ✎ NOTE Setup Musical Room Calibration Setting the Musical Room Calibration function takes about 3 minutes.
Setup ✎ NOTE Digital Output Set Digital output depending on the connected receiver. (For more details, please refer to the digital output selection). Be sure to select the correct Digital Output or you will hear no sound or a loud noise. If the HDMI device (Receiver, TV) is not compatible with a compressed format (Dolby digital, DTS), the audio signal outputs as PCM. • PCM • Bistream (Re-encode) • Bistream (Audiophile) Regular DVDs do not have Secondary and Effect audio.
03 Setup Dynamic Range Control Anynet+ (HDMI-CEC) You can listen at low volumes but still hear dialog clearly. This is only active when a Dolby Digital signal is detected. • Off : Turn Dynamic Range Control off. • On : Choose to listen to a movie at a lower volume without losing clarity of dialog. • Auto : The Dynamic Range Control is set automatically based on the information provided by the Dolby TrueHD Soundtrack.
Setup Description of Device (Storage) Information on the Product DivX(R) Registration • Total Size : Total size of the Device (Storage). • Available Size : Available size of the Device (Storage). View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content. ✎ NOTE In the external memory mode, disc playback will be stopped if you disconnect the USB device in the middle of the playback. Only those USB devices formatted in FAT file system (DOS 8.3 volume label) are supported.
03 To begin setting up the network connection for your product, follow these steps: 1. In the Home menu, press the ◄► buttons to select the Settings, and then press the ENTER button. 2. Press the ▲▼ buttons to select Network, and then press the ENTER button. 3. Press the ▲▼ buttons to select Network Setting, and then press the ENTER button. 4. Press the ▲▼ buttons to select Network Type, and then press the ENTER button. 5. Press the ▲▼ buttons to select Wired or Wireless, and then press the ENTER button.
Setup Settings Network Settings Display On-Screen Menu Internet Protocol Setup : Manual Audio Disc Menu 0 IP Address : 0 System Audio Subnet Mask : 255 255 Subtitle Network 0 Gateway : 0 Language DNS : Manual Security 0 DNS Server : 0 General Support > Move " Select : : 0 : 255 : 0 2. Press the RED (A) button on the remote control. 3. Press the PBC (WPS) button on your router within two minutes.
03 Display Audio System Network Language Security General Support Network Settings Network Selection Connecting to network. Network Name(SSID) : shj Stop " Select ' Return 5. In the list of networks, press the ▲▼ buttons to select a network, and then press the ENTER button. 6. If the PIN/Security pop-up appears, go to Step 7. If the Network Connecting Screen appears, go to Step 11. 7. 8. Press the ▲▼ buttons to select PIN or Security.
Setup 5. When done with each field, use the ► button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. 6. Enter the IP Address, Subnet Mask, and Gateway values. 7. Press the ▼ to go to DNS. 8. Press the ▼ button to go to the first DNS entry field. Enter the numbers as above. 9. When done, press the ▲ button to return to Access Point Selection. Select the network, and then press the ENTER button. 10.
03 General When you operate this menu for the first time, the password setup screen appears. Enter the desired 4-digit password using the number buttons. (Default password is set to 0000.) Parental Rating Settings Change the background theme of the menu screen.
Setup Support Software Upgrade This menu allows you to upgrade software for performance improvements or additional services. You can check the current software version, upgrade on the Internet and set the Auto upgrade notification. If the product is properly connected to the network by cable or wirelessly, the product will automatically connect to our website each time it is turned on and download update files if any valid upgrade exists.
Basic Functions Playing a Disc 04 Basic Functions Disc Structure The contents of disc are usually divided as below. Playback • Blu-ray Disc, DVD-VIDEO 1. Press the OPEN/CLOSE ( ) button to open the disc tray. 2. Place a disc gently into the tray with the disc’s label facing up. 3. Press the PLAY (►) button or OPEN/ CLOSE ( ) button to close the disc tray.
Basic Functions Using the Title Menu Using the Search and Skip Functions Z 1. During playback, press the TITLE MENU button on the remote control. 2. Press the ▲▼◄ ► buttons to make the desired selection, then press the ENTER button. TITLE MENU POPUP Searching for a Desired Scene hzZyx ✎ NOTE Depending on the disc, the menu items may differ and this menu may not be available. The Title Menu will only be displayed if there are at least two titles on the disc. Playing the Title List z 1.
04 Basic Functions Slow Motion Play/Step Motion Play Repeat Off Slow Motion Play hzZyx • In pause mode, press the SEARCH () button. If you press the SEARCH () button, the playback speed is reduced to * 1/8 * 1/4 * 1/2 • To return to normal speed playback, press the PLAY (► ) button. ✎ NOTE 3. To return to normal play, press the REPEAT button again. 4. Press the ▲▼ buttons to select Off, then press the ENTER button. ✎ NOTE Depending on the disc, the Repeat function may not be available.
Basic Functions Information about the primary / secondary Using the TOOLS button During playback, you can operate the disc menu by pressing the TOOLS button. TOOLS • TOOLS Menu Screen Tools Title : 1/1 Chapter 4/21 Playing Time : 00:12:06 Repeat Audio : 1/7 ENG Multi CH Subtitle : 1/6 ENG Angle : 1/1 BONUSVIEW Video : Off BONUSVIEW Audio : 0/1 Off Picture Setting < Change " Select ✎ NOTE ▪ Depending on the disc, the TOOLS menu may differ.
04 x • You must have some experience with video extraction and editing in order to use this feature properly. • To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media f le (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi • You can use up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.
Basic Functions Listening to Music 9 STOP button : Stops a track. 0 SKIP($) button : During playback, moves to the next page in the Music List or moves to the next track in the Playlist. ! SKIP (#)button : During playback, moves to the previous page in the Music List or moves to the previous track in the Playlist. If you press this button after three seconds of playback in the Playlist, the current track will be replayed from the beginning.
04 Displays the music information. 2 Displays the playlist. 3 Shows the current track/total tracks. 4 Displays control buttons available. 5 Shows the current play time/total play time. 6 Displays the current playback status. 7 2. To move to the Music List, press the STOP () or RETURN button. The Music List screen appears. 3. Press the ▲▼◄► buttons to move to the desired track, then press the YELLOW (C) button to check desired tracks. Repeat this procedure to select additional tracks.
Basic Functions Dolby Pro Logic II Mode Sound Mode DSP (Digital Signal Processor) Function DSP regulates the volume level and decreases drastic volume changes when you change channels or during a scene transitions. DSP PL II button. 1. Set the DPL IIz of speaker settings to “On”. (For further details, refer to page 34.
04 The Dolby Prologic II is not available for sound source encoded in 7.1 CH format or HD sound. For 2 channel audio CD/MP3 playback, wireless receiver does not produce sound (for rear and front center/height speakers). For sound source of DVD 5.1 CH, BD 5.1/7.1 CH, the wireless receiver produces sound (for rear and front center/height speakers) regardless of the sound settings.
Basic Functions Playing Back a USB Storage Device F You can use the USB connection to play multimedia files (MP3, JPEG, DivX, etc.) downloaded from a USB storage device. 1. Move to the Home menu. 2. In Stop mode, connect the USB storage device to the USB port on the front panel of the product. The message “Do you want to access the device?” appears. 3. Press the ◄► button to select Yes, then press the ENTER button. 4. Press the RED (A) button or the BLUE (D) button.
04 MO/ST Press the MO/ST button. D • Each time the button is pressed, the sound switches between STEREO and MONO. • In a poor reception area, select MONO for a clear, interference-free reception. Using an iPod You can enjoy music and video files from an iPod through the product. Basic Functions Setting Mono/Stereo iPod iPod Presetting Stations Example : Presetting FM 89.10 into memory 1. Press the FUNCTION button to select FM. ) button to select 2. Press the TUNING/CH ( <89.10>. 3.
Basic Functions ✎ NOTE Adjust the volume to a moderate level before you connect your iPod and product. When the product is powered on and you connect an iPod, the product charges your iPod's battery. Make sure to connect the dock connector so that the label “SAMSUNG” faces upward. “Made for iPod” means that an electronic accessory has been designed to connect specifically to the iPod and has been certified by the developer to meet Apple performance standards.
05 Network Services Check the following instructions before using any network service. Network Services You can enjoy various network services such as Internet@TV or BD-LIVE by connecting the product to the network system. 4. When you have signed off on the service agreement, the Internet@TV service starts updating. It takes several minutes. When the update is complete, you will see the Internet@TV menu screen. 1. Connect the product to the network. (see pages 27~28) Internet@TV at a Glance 2.
Network Services Using the On-Screen Keypad 13. Press the ENTER button. Through your remote, you can use the OnScreen Keypad in several Internet@TV applications to enter text. 14. The map and address appear on the screen. Pressing the FULL SCREEN button on the remote while you are using the Screen Keypad lets you change the text fields to lower case, upper case, numbers, and icons.
05 System Setup For a more enjoyable application experience, register and log in to your account. Reset To do this, you must create an account first. (For instructions on creating an account, refer to Internet@TV ID on this page) 1. Press the ▲▼◄► buttons to select the desired application and press the RED (A) button. Network Services Account Login Resets Internet@TV settings to factory default settings.
Network Services Service Manager Delete and lock applications installed in Internet@ TV. Lock Lock the application. Accessing a locked application requires a password. Using the color buttons with the Samsung Apps • RED (A) (Login) : To log in to the internet service. • GREEN (B) (Thumbnail View) : To change the view mode. • BLUE (D) (Sort By) : To sort the applications by Featured, Most Downloaded, Most Recent or Name. Delete Delete the application.
05 Once the product is connected to the network, you can enjoy various movie-related service contents using a BD-LIVE compliant disc. 1. Check the size of the remaining memory. The memory device must have at least 1GB of free space to accommodate the BD-LIVE services. 2. Insert a Blu-ray disc that supports BD-LIVE. 3. Select an item from various BD-LIVE service contents provided by the disc manufacturer.
Network Services 4. Select a folder to share from the My computer pane, and click the Share Folder Enabled icon ( ). (To remove a shared folder : Select a folder to remove from the shared folders, and click the Share Folder Disabled icon ( ).) 5. To apply the updated sharing state to the server, click the Set Change State icon ( ). 6. To enable the product to locate a PC server, click Share from the menu bar. Click Set Device Policy and click Accept. Share Server functions.
06 Other information Other information Troubleshooting Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG. Symptom Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. Playback does not start.
Other information Symptom Check/Remedy Aspect ratio cannot be changed. • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. • The product is not working. (Example: The power goes out or a strange noise is heard.) • Turn off the power, and press and hold the STOP ( ) button on the product for longer than 5 seconds.
06 Other information Symptom Check/Remedy PC Share Manager function I can see folders shared through the PC Share Manager, but I cannot see the files. • Since it shows only files corresponding to the Image, Music, and Movie categories, files that do not correspond to these categories may not be displayed. AllShare function Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded.
Other information Index A D Accessories AllShare Angle Anynet+ (HDMI-CEC) Audio Audio Language AV Sync 13 61 49 37 34 48 37 B Background BD-Live BD-LIVE Internet Connection BD Data Management BD Wise Before Starting (Initial settings) BONUSVIEW 43 61 42 37 31 29 49 C Digital Output Disc menu Display DivX(R) Deactivation DivX(R) Registration Dolby Pro Logic ll Mode DSP Dynamic Range Control E Energy Saving EQ Optimizer 43 38 18 18 21 23 23 25 25 26 26 26 27 27 28 28 44 43 35 Front Display 43 G 4
06 Other information Specifications General FM Tuner Power Requirements AC 120V, 60Hz Power Consumption 75 W Weight 8.3 Ibs Dimensions 16.9 (W) x 2.4 (H) x 13.0 (D) inches Operating Temperature Range +41°F to +95°F Operating Humidity Range 10 % to 75 % Signal/noise ratio 70 dB Usable sensitivity 10 dB Total harmonic distortion 0.5 % BD (Blu-ray Disc) DVD (Digital Versatile Disc) Disc CD : 5 inches (COMPACT DISC) CD : 3 1/2 inches (COMPACT DISC) Composite Video Reading Speed : 4.
Other information 7.1ch speaker system Speaker system Speaker Front Surround/Surround back Center Subwoofer 3Ω 3Ω Impedance 3Ω Frequency range 140Hz~20kHz 140Hz~20kHz 3Ω Output sound pressure level 87dB/W/M 87dB/W/M 87dB/W/M 88dB/W/M Rated input 165W 165W 170W 170W Maximum input 330W 330W 340W 340W Dimensions (W x H x D) Front : 3.54 x 51.18 x 4.69 inches (Stand base : 9.84 x 9.84 inches) Surround/Surround back : 3.54 x 5.57 x 2.7 inches Center : 14.17 x 2.93 x 2.
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area Contact Center ` North America Canada 1-800-SAMSUNG (726-7864) Mexico 01-800-SAMSUNG (726-7864) U.S.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG (7267864) www.samsung.com/us Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660-2112 Code No. AH68-02268N HT-C6730W_XAA_0824.
