User Manual (ver.2.0)

English 21
02 Connections
Connecting The Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into
the red (+) terminal, and then release the tab.
Connect the connecting plugs to the back of the product by
matching the colors of the speaker plugs to the speaker jacks.
With the product turned off, insert the TX card into the TX Card
Connection (WIRELESS) on the back of the product.
Hold the TX card so that the label "WIRELESS" faces upward and
insert the card into the port.
The TX card enables communication between the product
and the wireless receiver module.
Connect the left and right surround speakers to the wireless
receiver module.
Plug the power cord of the wireless receiver module into the
wall outlet.
Turn on the product. The product and wireless receiver
module will now communicate with each other and you will
hear sound from the Surround speakers.
1.
2.
3.
4.
5.
6.
7.
Black
Red
iPod
TX card
iPod
FM ANT
WIRE
SPEAKER IMPEDANCE : 3
iPod
FM ANT
W
SPEAKER IMPEDANCE : 3
SPEAKER IMPEDANCE : 3
Subwoofer
Center Speaker
Surround Speaker (R)
Wireless Receiver Module
Front Speaker (L)
Surround Speaker (L)
This product should be connected to the SWA-5000 only.
Front Speaker (R)
Surround Back Speaker (R) Surround Back Speaker (L)
HT-C6730W_XAA_0817.indd 21HT-C6730W_XAA_0817.indd 21 2010-08-17  11:32:122010-08-17  11:32:12